Toyota Tundra. Manual — part 460
2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)
a. Inspect the outer mirror switch.
1. Select "L" on the left/right adjustment switch.
2. Measure the resistance according to the value(s) in the table below.
Standard resistance
OUTER MIRROR SWITCH ASSEMBLY (W/ RETRACT MIRROR) TESTER
CONNECTION SPECIFIED CONDITION CHART
Fig. 89: Inspecting Outer Mirror Switch Assembly (W/ Retract Mirror)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
If the result is not as specified, replace the outer mirror switch.
3. Select "R" on the left/right adjustment switch.
Tester Connection
Condition
Specified Condition
4 (VL) - 8 (B)
6 (M+) - 7 (E)
UP
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
4 (VL) - 7 (E)
6 (M+) - 8 (B)
DOWN
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
5 (HL) - 8 (B)
6 (M+) - 7 (E)
LEFT
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
5 (HL) - 7 (E)
6 (M+) - 8 (B)
RIGHT
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Mirror - Tundra
4. Measure the resistance according to the value(s) in the table below.
Standard resistance
ADJUSTMENT SWITCH TESTER CONNECTION SPECIFIED CONDITION
CHART
If the result is not as specified, replace the outer mirror switch.
b. Inspect the retract switch.
1. Measure the resistance according to the value(s) in the table below.
Standard resistance
RETRACT SWITCH TESTER CONNECTION SPECIFIED CONDITION CHART
If the result is not as specified, replace the outer mirror switch.
3. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)
a. Inspect the outer mirror switch.
1. Select "L" on the left/right adjustment switch.
2. Measure the resistance according to the value(s) in the table below.
Standard resistance
OUTER MIRROR SWITCH ASSEMBLY (W/ MEMORY) TESTER CONNECTION
SPECIFIED CONDITION CHART
Tester Connection
Condition
Specified Condition
3 (VR) - 8 (B)
6 (M+) - 7 (E)
UP
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
3 (VR) - 7 (E)
6 (M+) - 8 (B)
DOWN
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
2 (HR) - 8 (B)
6 (M+) - 7 (E)
LEFT
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
2 (HR) - 7 (E)
6 (M+) - 8 (B)
RIGHT
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
Tester Connection
Condition
Specified Condition
8 (B) - 9 (MR)
10 (MF) - 7 (E)
Pressed (Retracts)
Below 1 ohms
Not pressed
10 kohms or higher
8 (B) - 10 (MF)
7 (E) - 9 (MR)
Pressed (Driving position) Below 1 ohms
Not pressed
10 kohms or higher
Tester Connection
Condition
Specified Condition
3 (M+) - 2 (E)
UP
Pressed
100 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Mirror - Tundra
Fig. 90: Inspecting Outer Mirror Switch Assembly (W/ Memory)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
If the result is not as specified, replace the outer mirror switch.
3. Select "R" on the left/right adjustment switch.
4. Using an ohmmeter, measure the resistance and check the results in accordance with the
value(s) in the table below.
Standard resistance
ADJUSTMENT SWITCH TESTER CONNECTION SPECIFIED CONDITION
CHART
Not pressed 10 kohms or higher
3(M+)-2(E)
DOWN
Pressed
470 ohms
Not pressed 10 kohms or higher
3(M+)-2(E)
LEFT
Pressed
800 ohms
Not pressed 10 kohms or higher
3 (M+) - 2 (E)
RIGHT
Pressed
250 ohms
Not pressed 10 kohms or higher
1 (MSE) - 2 (E)) L switch
Pressed
100 ohms
Not pressed 10 kohms or higher
Tester Connection
Condition
Specified Condition
3 (M+) - 2 (E)
UP
Pressed
100 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Mirror - Tundra
If the result is not as specified, replace the outer mirror switch.
b. Inspect the retract switch.
1. Measure the resistance according to the value(s) in the table below.
Standard resistance
RETRACT SWITCH TESTER CONNECTION SPECIFIED CONDITION CHART
If the result is not as specified, replace the outer mirror switch.
INSTALLATION
Fig. 91: Identifying Outer Mirror Switch Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Not pressed 10 kohms or higher
3 (M+) - 2 (E)
DOWN
Pressed
470 ohms
Not pressed 10 kohms or higher
3 (M+) - 2 (E)
LEFT
Pressed
800 ohms
Not pressed 10 kohms or higher
3 (M+) - 2 (E)
RIGHT
Pressed
250 ohms
Not pressed 10 kohms or higher
1 (MSE) - 2 (E)) R switch
Pressed
Below 1 ohms
Not pressed 10 kohms or higher
Tester Connection
Condition
Specified Condition
6 (B) - 7 (MR)
8 (MF) - 4 (E2)
Pressed (Retracts)
Below 1 ohms
Not pressed
10 kohms or higher
6 (B) - 8 (MF)
4 (E2) - 7 (MR)
Pressed (Driving position) Below 1 ohms
Not pressed
10 kohms or higher
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Mirror - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст