Toyota Tundra. Manual — part 2110
Fig. 74: Identifying Fuel Pump O-Ring And Spacer
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Attach the 5 claws to the claw holes and install the fuel pump and suction plate with filter.
Fig. 75: Locating Claws Fuel Pump
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. INSTALL SUB TANK SUB-ASSEMBLY
a. Attach the 2 claws to the claw holes and install the fuel sub tank.
Fig. 76: Locating Fuel Sub Tank Claws
2009 Toyota Tundra
2009 ENGINE Fuel (2UZ-FE) - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Attach the 3 claws to the claw holes.
Fig. 77: Identifying Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Connect the fuel tube.
Fig. 78: Locating Fuel Tube
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Install the tube part to the sub tank.
1. Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the
fuel sub tank.
Fig. 79: Attaching Claw On End Of Tube To Claw Hole
2009 Toyota Tundra
2009 ENGINE Fuel (2UZ-FE) - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Connect the fuel pump connector.
Fig. 80: Locating Fuel Pump Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSTALL FUEL SENDER GAUGE
a. Set the sender gauge to the fuel sub tank. Then slide the sender gauge downward to install it.
Fig. 81: Setting Sender Gauge To Fuel Sub Tank
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Connect the fuel sender gauge connector.
INSTALLATION
1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (see
INSTALLATION )
2. INSTALL FUEL TANK ASSEMBLY (see INSTALLATION )
3. CONNECT NO. 1 CANISTER OUTLET HOSE (see INSTALLATION )
4. CONNECT FUEL TANK TO FILLER PIPE HOSE (see INSTALLATION )
5. CONNECT FUEL TANK TO CANISTER TUBE (see INSTALLATION )
6. CONNECT WIRE HARNESS (see INSTALLATION )
7. CONNECT VENT LINE HOSE (see INSTALLATION )
2009 Toyota Tundra
2009 ENGINE Fuel (2UZ-FE) - Tundra
8. CONNECT FUEL TANK RETURN TUBE (see INSTALLATION )
9. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (see INSTALLATION )
10. INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for Rough Road Area
Specification Vehicles) (see INSTALLATION )
11. INSTALL FUEL TANK CAP ASSEMBLY
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13. INSPECT FOR FUEL LEAK (see INSTALLATION )
FUEL PUMP ECU
COMPONENTS
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ENGINE Fuel (2UZ-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст