Toyota Tundra. Manual — part 618
Fig. 25: Inspecting Front Seat Adjuster Assembly RH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: Go to step 21
OK: REPAIR OR REPLACE HARNESS OR CONNECTOR (FRONT POWER SEAT LUMBAR
SWITCH BATTERY AND BODY GROUND)
21. CHECK HARNESS AND CONNECTOR (FRONT POWER SEAT LUMBAR SWITCH
LUMBAR SUPPORT MOTOR LH)
a. Disconnect the Y10 switch connector.
b. Disconnect the Y11 motor connector.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
FRONT POWER SEAT LUMBAR SWITCH LUMBAR SUPPORT MOTOR LH
Tester Connection
Condition Specified Condition
Y10-1 (R) - Y11-2
Always
Below 1 ohms
Y10-4 (H) - Y11-1
Y10-1 (R) - Body ground
Always
10 kohms or higher
Y10-4 (H) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Fig. 26: Identifying Front Power Seat Lumbar Switch And Lumbar Support Motor
Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE FRONT SEAT ADJUSTER ASSEMBLY RH (see REMOVAL )
FRONT POWER SEAT CONTROL SYSTEM (W/O MEMORY)
PARTS LOCATION
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Fig. 27: Identifying Front Power Seat Control System Components Location (1 Of 3)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Fig. 28: Identifying Front Power Seat Control System Components Location (2 Of 3)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Seat - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст