Toyota Tundra. Manual — part 1968
Maximum chain elongation:
137.6 mm (5.42 in.)
HINT:
Perform the measurement at 3 random places If the elongation is more than the maximum, replace
the chain
9
INSPECT CRANKSHAFT TIMING SPROCKET RH
a
Wrap the chain around the sprocket
b
Using a vernier caliper, measure the sprocket diameter with the chain
Minimum sprocket diameter (with chain):
61.4 mm (2.42 in.)
HINT:
The vernier caliper must contact the chain rollers for the measurement
If the diameter is less than the minimum, replace the chain and sprocket
Fig. 316: Measuring Crankshaft Timing Sprocket Diameter - RH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
10
INSPECT CRANKSHAFT TIMING SPROCKET LH
a
Wrap the chain around the sprocket
b
Using a vernier caliper, measure the sprocket diameter with the chain
Minimum sprocket diameter (with chain):
61.4 mm (2.42 in.)
HINT:
The vernier caliper must contact the chain rollers for the measurement
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
If the diameter is less than the minimum, replace the chain and sprocket
Fig. 317: Measuring Sprocket Diameter
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
11
INSPECT NO. 1 CHAIN TENSIONER ASSEMBLY
a
Move the stopper plate upward to release the lock Push the plunger and check that it moves
smoothly If necessary, replace the chain tensioner
Fig. 318: Identifying Stopper Plate And Plunger
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
12
INSPECT NO. 2 CHAIN TENSIONER ASSEMBLY
a
Check that the plunger moves smoothly
b
Measure the worn depth of the chain tensioner
Maximum depth:
0.9 mm (0.0354 in.)
If the depth is more than the maximum, replace the chain tensioner
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 319: Identifying Worn Depth Of No. 2 Chain Tensioner
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
13
INSPECT NO. 3 CHAIN TENSIONER ASSEMBLY
a
Check that the plunger moves smoothly
b
Measure the worn depth of the chain tensioner
Maximum depth:
0.9 mm (0.0354 in.)
If the depth is more than the maximum, replace the chain tensioner
Fig. 320: Identifying Worn Depth Of No. 3 Chain Tensioner
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
14
INSPECT NO. 1 CHAIN TENSIONER SLIPPER LH
a
Measure the worn depth of the chain tensioner slipper
Maximum depth:
1.0 mm (0.0394 in.)
If the depth is more than the maximum, replace the chain tensioner slipper
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 321: Measuring Worn Depth Of Chain Tensioner Slipper
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
15
INSPECT NO. 1 CHAIN TENSIONER SLIPPER RH
a
Measure the worn depth of the chain tensioner slipper
Maximum depth:
1.0 mm (0.0394 in.)
If the depth is more than the maximum, replace the chain tensioner slipper
Fig. 322: Identifying Worn Depth Of No. 1 Chain Tensioner Slipper - RH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
16
INSPECT NO. 1 CHAIN VIBRATION DAMPER LH
a
Measure the worn depth of the chain vibration damper
Maximum depth:
1.0 mm (0.0394 in.)
If the depth is more than the maximum, replace the chain vibration damper
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст