Toyota Tundra. Manual — part 2514
Fig. 204: Identifying Hazard Warning Switch Components
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (See REMOVAL )
2. REMOVE HAZARD WARNING SWITCH
a. Detach the 2 claws and remove the switch.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Lighting - Tundra
Fig. 205: Identifying Hazard Warning Switch Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION
1. INSPECT HAZARD WARNING SWITCH
a. Measure the resistance according to the value(s) in the table below.
Fig. 206: Identifying Hazard Warning Switch Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Standard resistance
HAZARD WARNING SWITCH
If the result is not as specified, replace the warning switch.
b. Connect the battery's positive (+) lead to terminal 3 and the negative (-) lead to terminal 2.
c. Check that the light comes on.
Tester Connection
Switch Condition
Specified Condition
1 - 4
Hazard warning switch OFF 10 kohms or higher
Hazard warning switch ON
Below 1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Lighting - Tundra
OK: Light comes on
If the result is not as specified, replace the warning switch.
INSTALLATION
1. INSTALL HAZARD WARNING SWITCH
a. Attach the 2 claws to install the switch.
Fig. 207: Identifying Hazard Warning Switch Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (See INSTALLATION )
ROOM LIGHT SWITCH
COMPONENTS
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Lighting - Tundra
Fig. 208: Identifying Room Light Switch Components
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (See REMOVAL )
2. REMOVE ROOM LIGHT SWITCH ASSEMBLY
a. Detach the 2 claws and remove the light switch.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Lighting - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст