Toyota Tundra. Manual — part 1060
Fig. 67: Identifying Propeller Shaft Assembly Components With Torque Specification (4 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY
a. Remove the 2 bolts and insulator bracket.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Fig. 68: Locating Insulator Bracket Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. REMOVE TRANSFER HEAT INSULATOR
a. Remove the 3 bolts and heat insulator.
Fig. 69: Locating Heat Insulator Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. REMOVE PROPELLER SHAFT ASSEMBLY (for 2 Joint Type)
a. Place matchmarks on the propeller shaft flange and differential flange.
Fig. 70: Identifying Matchmarks On Propeller Shaft Flange And Differential Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the 4 nuts and 4 bolts, and disconnect the propeller shaft from differential side.
c. Place matchmarks on the propeller shaft flange and transfer flange.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Fig. 71: Identifying Matchmarks On Propeller Shaft Flange And Transfer Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Remove the 4 nuts and propeller shaft.
4. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for 3 Joint Type)
a. Place matchmarks on the propeller shaft flange and differential flange.
Fig. 72: Identifying Matchmarks On Propeller Shaft Flange And Differential Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the 4 bolts and 4 nuts.
c. w/o Bearing Washer:
1. Remove the 2 mounting bolts from the frame crossmember.
d. w/ Bearing Washer:
1. Remove the 2 mounting bolts and 2 bearing washers from the frame crossmember.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Fig. 73: Locating Frame Crossmember Mounting Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Place matchmarks on the propeller shaft flange and transfer flange.
Fig. 74: Identifying Matchmarks On Propeller Shaft Flange And Transfer Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
f. Remove the 4 nuts and propeller shaft.
DISASSEMBLY
1. REMOVE REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING (for 3 Joint
Type)
a. Place matchmarks on the propeller shaft yoke and universal joint yoke.
Fig. 75: Identifying Matchmarks On Propeller Shaft Yoke
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the grease fitting from the spider bearing.
2009 Toyota Tundra
2009 DRIVELINE/AXLES Propeller Shaft - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст