Toyota Sienna (2020 year). Manual in english — part 6
334
5-1. Using the air conditioning system and defogger
SIENNA_OM_OM08035U_(U)
■
Adjusting the fan speed setting
Press “
” on
to increase the fan speed and “
” to
decrease the fan speed.
Press
to turn the fan off.
■
Change the airflow mode
To change the air outlets, press
the “MODE” button.
The air outlets used are
switched each time the button is
pressed.
Air flows to the upper
body.
Air flows to the upper body
and feet.
Air flows to the feet.
Air flows to the feet and
the windshield defogger
operates.
1
2
3
4
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
335
5-1. Using the air conditioning system and defogger
5
In
Press
(“AUTO” appears on the display).
Adjust the temperature setting.
To stop the operation, press
.
■
Automatic mode indicator
If the fan speed setting or air flow modes are operated, the auto-
matic mode indicator goes off. However, automatic mode for func-
tions other than that operated is maintained.
■
Adjusting the temperature setting
Press the “REAR” button (indicator and rear temperature on the
display on).
Turn the “REAR TEMP” dial clockwise to increase the tempera-
ture and counterclockwise to decrease the temperature.
The air conditioning system switches between individual (the lower side
indicator on the “SYNC” button is off) and simultaneous (the lower side
indicator on the “SYNC” button is on) modes each time the “SYNC” but-
ton is pressed.
■
Adjusting the fan speed
Press “
” on
to increase the fan speed and “
” to
decrease the fan speed.
Press
to turn the fan off.
■
Changing the air outlets
Press the “REAR MODE” button.
The air outlets switch each time the button is pressed. (
Using the automatic mode
Changing the rear setting
1
2
3
1
2
-------------------------------------------------------------------------------------------------------------------------------------------------------------
336
5-1. Using the air conditioning system and defogger
SIENNA_OM_OM08035U_(U)
■
Switching between outside air and recirculated air modes
Press
.
The mode switches between outside air mode (
appears on the
display) and recirculated air mode (
appears on the display) each
time the button is pressed.
■
Defogging the windshield
Defoggers are used to defog the windshield and front side win-
dows.
Press
.
Set
to outside air mode if the recirculated air mode is used. (It
may switch automatically.)
To defog the windshield and the side windows early, turn the air flow and
temperature up.
To return to the previous mode, press
again when the wind-
shield is defogged.
■
Rear window defogger, outside rear view mirror defoggers (if
equipped) and windshield wiper de-icer (if equipped)
Defoggers are used to defog the rear window, and to remove rain-
drops, dew and frost from the outside rear view mirrors. The wind-
shield wiper de-icer is used to prevent ice from building up on the
windshield and wiper blades.
Press
.
The defoggers and windshield wiper de-icer will automatically turn off
after a period of time.
Other functions
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
337
5-1. Using the air conditioning system and defogger
5
In
■
Location of air outlets
The air outlets and air volume
changes according to the
selected air flow mode.
■
Adjusting the air flow direction and opening/closing the air
outlets
Turn the knob to open or close the vent.
Direct air flow to the left or right, up or down.
Air outlets
Center outlets
Right and left side outlets
1
2
-------------------------------------------------------------------------------------------------------------------------------------------------------------
338
5-1. Using the air conditioning system and defogger
SIENNA_OM_OM08035U_(U)
■
Using automatic mode
Fan speed is adjusted automatically according to the temperature setting and
the ambient conditions.
Therefore, the fan may stop for a while until warm or cool air is ready to flow
immediately after
is pressed.
■
When the outside temperature exceeds 75°F (24°C) and the air condition-
ing system is on
●
In order to reduce the air conditioning power consumption, the air condition-
ing system may switch to recirculated air mode automatically.
This may also reduce fuel consumption.
●
Recirculated air mode is selected as a default mode when the engine switch
is turned to the “ON” position (vehicles without a smart key system) or
IGNITION ON mode (vehicles with a smart key system).
●
It is possible to switch to outside air mode at any time by pressing
.
■
Fogging up of the windows
●
The windows will easily fog up when the humidity in the vehicle is high.
Pressing
on will dehumidify the air from the outlets and defog the
windshield effectively.
●
If you turn “A/C” off, the windows may fog up more easily.
●
The windows may fog up if the recirculated air mode is used.
■
Outside/recirculated air mode
●
When driving on dusty roads such as tunnels or in heavy traffic, set
to the recirculated air mode. This is effective in preventing outside air from
entering the vehicle interior. During cooling operation, setting the recircu-
lated air mode will also cool the vehicle interior effectively.
●
Outside/recirculated air mode may automatically switch depending on the
temperature setting or the inside temperature.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
339
5-1. Using the air conditioning system and defogger
5
In
■
Temperature display
The temperature display on the multi-information display can be changed.
(
■
When
is selected for the air outlets used
For your driving comfort, air flowing to the feet may be warmer than air flow-
ing to the upper body depending on the temperature setting.
■
When the outside temperature is low
The dehumidification function may not operate even when
is pressed.
■
When “A/C ON” flashes in the display
Press
and turn off the air conditioning system before turning it on once
more. There may be a problem in the air conditioning system if “A/C ON” con-
tinues to flash. Turn the air conditioning system off and have it inspected by
your Toyota dealer.
■
Ventilation and air conditioning odors
●
To let fresh air in, set the air conditioning system to the outside air mode.
●
During use, various odors from inside and outside the vehicle may enter into
and accumulate in the air conditioning system. This may then cause odor to
be emitted from the vents.
●
To reduce potential odors from occurring:
• It is recommended that the air conditioning system be set to outside air
mode prior to turning the vehicle off.
• The start timing of the blower may be delayed for a short period of time
immediately after the air conditioning system is started in automatic
mode.
■
Air conditioning filter
■
Customization
Settings (e.g.
linked operation) can be changed.
(Customizable features:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
340
5-1. Using the air conditioning system and defogger
SIENNA_OM_OM08035U_(U)
WARNING
■
To prevent the windshield from fogging up
●
Do not use
during cool air operation in extremely humid weather.
The difference between the temperature of the outside air and that of the
windshield can cause the outer surface of the windshield to fog up, block-
ing your vision.
■
To prevent burns
●
Do not touch the rear view mirror surfaces when the outside rear view mir-
ror defoggers (vehicles with outside rear view mirror defoggers) are on.
●
Do not touch the glass at lower part of the windshield or to the side of the
front pillars when the windshield wiper de-icer is on. (vehicles with wind-
shield wiper de-icer)
NOTICE
■
To prevent battery discharge
Do not leave the air conditioning system on longer than necessary when the
engine is stopped.
●
Do not place anything on the instrument
panel which may cover the air outlets.
Otherwise, air flow may be obstructed,
preventing the windshield defoggers
from defogging.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
341
SIENNA_OM_OM08035U_(U)
5-1. Using the air conditioning system and defogger
5
In
Rear automatic air conditioning system
■
Adjusting the temperature setting
Press “
” on the “TEMP” button to increase the temperature and “
”
to decrease the temperature.
■
Adjusting the fan speed
Press “
” on
to increase the fan speed and “
” to decrease
the fan speed.
Press the “OFF” button to turn the fan off.
Airflow and outlets are automatically adjusted according to the
temperature setting.
Air conditioning controls
-------------------------------------------------------------------------------------------------------------------------------------------------------------
342
5-1. Using the air conditioning system and defogger
SIENNA_OM_OM08035U_(U)
■
Changing the air outlets
Press the “MODE” button.
The air flow mode switch each time the button is pressed.
Air flows to the upper body.
Air flows to the upper body
and feet.
Air flows to the feet.
Press the “AUTO” button (“AUTO” appears on the display).
Adjust the temperature setting.
To stop the operation, press the “OFF” button.
■
Automatic mode indicator
If the fan speed setting or air flow modes are operated, the auto-
matic mode indicator goes off. However, automatic mode for func-
tions other than that operated is maintained.
■
Location of air outlets
The air outlets and air volume
changes according to the
selected air flow mode.
1
2
3
Using automatic mode
Air outlets
1
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
343
5-1. Using the air conditioning system and defogger
5
In
■
Adjusting the position of the air outlets
Direct air flow to the front or
rear, up or down.
■
Temperature display
The temperature display on the multi-information display can be changed.
(
■
When the front air conditioning system is in simultaneous mode
The lower side indicator on the “SYNC” button is on. The rear air conditioning
system controls will continue to function. (
NOTICE
■
To prevent battery discharge
Do not leave the air conditioning system on longer than necessary when the
engine is stopped.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
344
SIENNA_OM_OM08035U_(U)
5-1. Using the air conditioning system and defogger
Heated steering wheel
/seat heaters
: If equipped
Heated steering wheel and seat heaters heat the side grips of the
steering wheel and seats, respectively.
WARNING
●
Care should be taken to prevent injury if anyone in the following categories
comes in contact with the steering wheel and seats when the heater is on:
• Babies, small children, the elderly, the sick and the physically chal-
lenged
• Persons with sensitive skin
• Persons who are fatigued
• Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
●
Observe the following precautions to prevent minor burns or overheating:
• Do not cover the seat with a blanket or cushion when using the seat
heater.
• Do not use seat heater more than necessary.
NOTICE
●
Do not put heavy objects that have an uneven surface on the seat and do
not stick sharp objects (needles, nails, etc.) into the seat.
●
To prevent battery discharge, do not use the functions when the engine is
not running.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
345
5-1. Using the air conditioning system and defogger
5
In
Turns the heated steering wheel
on/off
The indicator light comes on when
the heated steering wheel is oper-
ating.
●
The heated steering wheel can be used when the engine switch is in IGNI-
TION ON mode.
●
The heated steering wheel will automatically turn off after about 30 minutes.
Heated steering wheel
-------------------------------------------------------------------------------------------------------------------------------------------------------------
346
5-1. Using the air conditioning system and defogger
SIENNA_OM_OM08035U_(U)
For driver’s seat
For front passenger’s seat
On
The indicator light comes on.
Adjusts the seat temperature
The further you move the dial
upward, the warmer the seat
becomes.
●
The seat heaters can be used when the engine switch is in the “ON” position
(vehicles without a smart key system) or IGNITION ON mode (vehicles with
a smart key system).
●
When not in use, move the dial fully downward. The indicator light turns off.
Seat heaters
1
2
3
4
-------------------------------------------------------------------------------------------------------------------------------------------------------------
347
SIENNA_OM_OM08035U_(U)
5-2. Using the interior lights
5
In
Interior lights list
Rear personal/interior lights (if equipped) (
Rear ceiling lights (if equipped) (
Front personal/interior lights (
Engine switch light
Front door courtesy lights (if equipped)
Outer foot lights (if equipped)
1
2
3
4
5
6
-------------------------------------------------------------------------------------------------------------------------------------------------------------
348
SIENNA_OM_OM08035U_(U)
5-2. Using the interior lights
Turns the lights on
Turns the door position on
Turns the lights off
■
Front
Turns the light on/off
■
Rear (if equipped)
Turns the light on/off
When the personal/interior light main switch is in the off position, the
rear personal lights will not turn on even if the switch is on.
Personal/interior light main switch
1
2
3
Personal/interior lights
Type A
Type B
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
349
5-2. Using the interior lights
5
In
Turns the lights on/off
When the personal/interior light
main switch is in the off position,
the rear ceiling lights will not turn
on even if the switch is on.
■
Adjusting the rear personal/interior lights angle (if equipped)
■
Illuminated entry system
Vehicles without a smart key system
The lights automatically turn on/off according to the engine switch position,
whether the doors are locked/ unlocked, and whether the doors are open/
closed.
Vehicles with a smart key system
The lights automatically turn on/off according to engine switch mode, the
presence of the electronic key, whether the doors are locked/unlocked, and
whether the doors are open/closed.
■
To prevent battery discharge
If the interior lights remain on when the engine switch is turned off, the lights
will go off automatically after 20 minutes.
■
Customization
Settings (e.g. the time elapsed before lights turn off) can be changed.
(Customizable features:
Rear ceiling lights (if equipped)
Push the edge of the light lens.
NOTICE
■
Rear ceiling lights (if equipped)
Do not hang anything on the gap between the ceiling light cover and the
ceiling or pull the ceiling light cover strongly.
Doing so may cause damage.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
350
SIENNA_OM_OM08035U_(U)
5-3. Using the storage features
List of storage features
Auxiliary boxes (
Cup holders (
Door pockets (
Bottle holders (
Glove boxes (
Console box (if equipped)
(
WARNING
●
Do not leave glasses, lighters or spray cans in the storage spaces, as this
may cause the following when cabin temperature becomes high:
• Glasses may be deformed by heat or cracked if they come into contact
with other stored items.
• Lighters or spray cans may explode. If they come into contact with other
stored items, the lighter may catch fire or the spray can may release
gas, causing a fire hazard.
●
When driving or when the storage compartments are not in use, keep the
lids closed.
In the event of sudden braking or sudden swerving, an accident may occur
due to an occupant being struck by an open lid or the items stored inside.
1
2
3
4
5
6
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
351
5-3. Using the storage features
5
In
Upper glove box
Push the button.
Open the lid.
Lower glove box
The lower glove box can be opened by pulling the lever and can be
locked and unlocked by using the master key (vehicles without a
smart key) or the mechanical key (vehicles with a smart key system).
Unlock
Lock
Open
Glove boxes
1
2
1
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
352
SIENNA_OM_OM08035U_(U)
5-3. Using the storage features
Press the tab.
■
Sliding the console box (type B)
From front
From rear
■
Console box light
The console box light turns on when the headlight switch is on.
Console box (if equipped)
Type A
Type B
Press the tab and slide the console box.
Pull up the lever and slide the console
box.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
353
5-3. Using the storage features
5
In
WARNING
■
Console box adjustment precaution (type B)
●
Do not adjust the position of the console box while the vehicle is moving.
This may cause the driver to mishandle the vehicle and may lead to an
accident that results in death or serious injury.
●
Be careful not to get hands or feet pinched between the console box and
the rear sliding console or rear seat.
●
Be careful not to allow the console box to hit any passenger while adjust-
ing its position.
●
After adjusting the console box, make sure it is securely locked in position.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
354
SIENNA_OM_OM08035U_(U)
5-3. Using the storage features
Cup holders
Front
Console box type A
(if equipped)
Press in and release the front cup
holder.
Console box type B
(if equipped)
Console box type C
(if equipped)
Pull the lid down.
Second seat (if equipped)
Rear
Removing the second center seat.
(
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
355
5-3. Using the storage features
5
In
■
Cup holder light (console box type)
The cup holder light turns on when the headlight switch is on.
WARNING
Do not place anything other than cups or beverage cans in the cup holders.
Other items may be thrown out of the holders in the event of an accident or
sudden braking and cause injury. If possible, cover hot drinks to prevent
burns.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
356
SIENNA_OM_OM08035U_(U)
5-3. Using the storage features
●
When storing a bottle, close the cap.
●
The bottle may not be stored depending on its size or shape.
Bottle holders
Front
Rear
II63SN007
WARNING
Do not place anything other than a bottle in the bottle holders.
Other items may be thrown out of the holders in the event of an accident or
sudden braking and cause injury.
NOTICE
Rear: Make sure items in the sliding door bottle holder will not interfere with
the motion of the door before operating the door. Items that protrude from
the bottle holder may prevent door opening or damage the vehicle.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
357
5-3. Using the storage features
5
In
Door pockets
Front
Rear
NOTICE
Rear: Make sure magazines are not bent
or protruding from the sliding door pock-
ets. Do not insert anything too big so that
the shape of the sliding door pockets is
distorted. Such objects may obstruct the
opening/closing of the sliding doors,
damage the sliding door pockets or the
vehicle body, and may result in a mal-
function.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
358
SIENNA_OM_OM08035U_(U)
5-3. Using the storage features
Auxiliary boxes
Type A
Type B
Push the lid.
Push down the knob.
Type C (if equipped)
Type D
Type E (if equipped)
Type F
Lift the lid.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
359
5-3. Using the storage features
5
In
Type G (if equipped)
Type H (if equipped)
Removing the second center seat.
(
Type I (if equipped)
Type J (if equipped)
Type K (if equipped)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
360
SIENNA_OM_OM08035U_(U)
5-3. Using the storage features
■
Coin holder (type B)
Nickels, quarters and dimes can be stored
separately.
WARNING
■
Maximum storage weight (type A)
Do not store items heavier than 0.4 lb. (200 g).
Doing so may cause the auxiliary box to open and the items inside may fall
out, resulting in an accident.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
361
SIENNA_OM_OM08035U_(U)
5-3. Using the storage features
5
In
Luggage compartment features
Raise the hook to use.
The cargo hooks are provided for
securing loose items.
Raise the hook to use.
Cargo hooks
WARNING
To avoid injury, always return the cargo hooks to their positions when they
are not in use.
Cargo net hooks
Pattern 1
Pattern 2
NOTICE
To prevent damage to the cargo net hooks, avoid hanging things other than
a cargo net on them.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
362
SIENNA_OM_OM08035U_(U)
5-3. Using the storage features
Engage the latch buckle.
Storage box (if equipped)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
363
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
5
In
Other interior features
To set the visor in the forward
position, flip it down.
To set the visor in the side posi-
tion, flip down, unhook, and
swing it to the side.
To use the side extender, place
the visor in the side position,
then slide it backward.
Open the cover.
The light turns on when the cover
is opened.
■
To prevent battery discharge
If the vanity lights remain on for 20 minutes while the engine is off, the lights
will turn off automatically.
Sun visors
1
2
3
Vanity mirrors
-------------------------------------------------------------------------------------------------------------------------------------------------------------
364
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
Push the lid and allow the lid to
open.
Push the lid. To first locked
position.
Conversation mirror
1
2
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
365
5-4. Using the other interior features
5
In
The power outlet can be used for the following components:
12 V: Accessories that run on less than 10 A
120 V AC: Accessories that use less than 100 W
■
12 V
Open the cover.
Power outlets
Center panel type A
Center panel type B
Luggage compartment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
366
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
■
120 V AC (if equipped)
Open the cover.
Power outlet socket console
box type A
Power outlet socket console
box type B
Power outlet socket luggage
compartment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
367
5-4. Using the other interior features
5
In
■
The power outlet can be used when
Vehicles without a smart key system
12 V: The engine switch is in the “ACC” or “ON” position.
120 V AC: The engine switch is in the “ON” position.
Vehicles with a smart key system
12 V: The engine switch is in ACCESSORY or IGNITION ON mode.
120 V AC: The engine switch is in IGNITION ON mode.
NOTICE
■
To avoid damaging the power outlet
Close the power outlet lid when the power outlet is not in use.
Foreign objects or liquids that enter the power outlet may cause a short cir-
cuit.
■
To prevent blown fuse
12 V
Do not use an accessory that uses more than 12 V 10 A.
120 V AC
Do not use a 120 V AC appliance that requires more than 100 W.
If a 120 V AC appliance that consumes more than 100 W is used, the pro-
tection circuit may cut the power supply.
■
To prevent battery discharge
Do not use the power outlet longer than necessary when the engine is not
running.
■
Appliances that may not operate properly (120 V AC)
The following 120 V AC appliances may not operate properly even if their
power consumption is under 100 W:
●
Appliances with high initial peak wattage
●
Measuring devices that process precise data
●
Other appliances that require an extremely stable power supply
-------------------------------------------------------------------------------------------------------------------------------------------------------------
368
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
The USB charging ports are used to supply 2.1 A of electricity at 5 V
to external devices.
The USB charging ports are for charging only. They are not designed
for data transfer or other purposes.
Depending on the external device, it may not charge properly. Refer to
the manual included with the device before using a USB charging
port.
■
Using the USB charging ports
USB charging ports
Center panel (if equipped)
Console box type A
(if equipped)
Open the lid
Open the lid
Console box type B
(if equipped)
Auxiliary box (third seat left-
hand side)
Open the lid
Open the auxiliary box lid and
open the lid.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
369
5-4. Using the other interior features
5
In
■
The USB charging ports can be used when
Vehicles without a smart key system
The engine switch is in the “ACC” or “ON” position.
Vehicles with a smart key system
The engine switch is in ACCESSORY or IGNITION ON mode.
■
Situations in which the USB charging ports may not operate correctly
●
If a device which consumes more than 2.1 A at 5 V is connected
●
If a device designed to communicate with a personal computer, such as a
USB memory device, is connected
●
If the connected external device is turned off (depending on device)
●
If the temperature inside the vehicle is high, such as after the vehicle has
been parked in the sun
■
About connected external devices
Depending on the connected external device, charging may occasionally be
suspended and then start again. This is not a malfunction.
NOTICE
■
To prevent damage to the USB charging ports
●
Do not insert foreign objects into the ports.
●
Do not spill water or other liquids into the ports.
●
When the USB charging ports are not in use, close the lids. If a foreign
object or liquid enters a port may cause a short circuit.
●
Do not apply excessive force to or impact the USB charging ports.
●
Do not disassemble or modify the USB charging ports.
■
To prevent damage to external devices
●
Do not leave external devices in the vehicle. The temperature inside the
vehicle may become high, resulting in damage to an external device.
●
Do not push down on or apply unnecessary force to an external device or
the cable of an external device while it is connected.
■
To prevent battery discharge
Do not use the USB charging ports for a long period of time with the engine
stopped.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
370
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
Pull the armrest down for use.
■
Adjusting the front seat armrests with lock release button (if equipped)
Armrests
Front seat
Second seat (if equipped)
Push the armrest down while pressing the
button.
NOTICE
To prevent damage to the armrest, do not apply too much load on the arm-
rest.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
371
5-4. Using the other interior features
5
In
Assist grips
Type A
Type B
An assist grip installed on the ceil-
ing can be used to support your
body while sitting on the seat.
An assist grip installed on the pil-
lar can be used when getting in
or out of the vehicle and others.
WARNING
Type A: Do not use the assist grip when getting in or out of the vehicle or ris-
ing from your seat.
NOTICE
To prevent damage to the assist grip, do not hang any heavy object or put a
heavy load on the assist grip.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
372
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
Pull the tab up.
Secure the sunshade using the hooks.
To retract the sunshade, pull the tab up slightly to unhook the sunshade,
and lower the sunshade slowly.
Rear side sunshades (if equipped)
Rear door window
Rear quarter window
NOTICE
To ensure normal operation of the rear sunshades, observe the following
precautions.
●
Do not place anything where it may hinder the opening/closing of the sun-
shade.
●
Do not place anything on the sunshade.
1
2
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
373
5-4. Using the other interior features
5
In
The hooks are designed to hang things like a grocery bag.
Grocery bag hooks
Type A (front seatback)
(if equipped)
Type B (third seatback)
Type C (luggage compartment)
Type D (luggage compartment)
Pull the hook up.
WARNING
Type C: When not in use, keep the grocery bag hook stowed.
Injuries may result in the event of sudden braking, sudden swerving or an
accident.
NOTICE
Type A and B: Do not hang any object heavier than 8.8 lb. (4 kg) on the gro-
cery bag hook.
ITN38N036
-------------------------------------------------------------------------------------------------------------------------------------------------------------
374
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
Garage door opener
The HomeLink
®
wireless control system in your vehicle has 3 buttons
which can be programmed to operate 3 different devices. Refer to the
programming methods on the following pages to determine the
method which is appropriate for the device.
HomeLink
®
indicator light
Garage door operation indica-
tors
Buttons
■
Before programming the HomeLink
®
●
During programming, it is possible that garage doors, gates, or
other devices may operate. For this reason, make sure that peo-
ple and objects are clear of the garage door or other devices to
prevent injury or other potential harm.
●
It is recommended that a new battery be placed in the remote
control transmitter for more accurate programming.
●
Garage door opener motors manufactured after 1995 may be
equipped with rolling code protection. If this is the case, you may
need a stepladder or other sturdy, safe device to reach the
“Learn” or “Smart” button on the garage door opener motor.
: If equipped
The garage door opener can be programmed to operate garage
doors, gates, entry doors, door locks, home lighting systems,
security systems, and other devices.
HomeLink
®
1
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
375
5-4. Using the other interior features
5
In
■
Programming the HomeLink
®
Steps
through
must be performed within 60 seconds, other-
wise the indicator light will stop flashing and programming will not
be able to be completed.
Press and release the HomeLink
®
button you want to program
and check that the HomeLink
®
indicator light flashes orange.
Point the remote control
transmitter for the device at
the rear view mirror, 1 to 3 in.
(25 to 75 mm) from the
HomeLink
®
buttons.
Keep the HomeLink
®
indicator
light in view while programming.
Program a device.
Programming a device other than an entry gate (for U.S.A.
owners)
Press and hold the remote control transmitter button until the
HomeLink
®
indicator light changes from slowly flashing orange to
rapidly flashing green (rolling code) or continuously lit green
(fixed code), then release the button.
Programming an entry gate (for U.S.A. owners)/Programming
a device in the Canadian market
Press and release the remote control transmitter button at 2 sec-
ond intervals, repeatedly, until the HomeLink
®
indicator light
changes from slowly flashing orange to rapidly flashing green
(rolling code) or continuously lit green (fixed code).
1
3
1
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
376
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
Test the HomeLink
®
operation by pressing the newly pro-
grammed button and observing the indicator light:
●
Indicator light illuminates: Programming of a fixed code device
has completed. The garage door or other device should oper-
ate when a HomeLink
®
button is pressed and released.
●
Indicator light flashes rapidly: The garage door opener motor
or other device is equipped with a rolling code. To complete
programming, firmly press and hold the HomeLink
®
button for
2 seconds then release it.
●
If the garage door or other device does not operate, proceed
to “Programming a rolling code system”.
Repeat the steps above to program another device for any of the
remaining HomeLink
®
buttons.
■
Programming a rolling code system
2 or more people may be necessary to complete rolling code pro-
gramming.
Locate the “Learn” or “Smart”
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire
is attached to the unit. The
name and color of the button
may vary by manufacturer.
Refer to the Owner’s manual
supplied with the garage door
opener motor for details.
Press and release the
“Learn” or “Smart” button.
Perform
within 30 sec-
onds after performing
.
4
5
1
2
3
2
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
377
5-4. Using the other interior features
5
In
Press and hold the desired
HomeLink
®
button (inside the
vehicle) for 2 seconds and
release it. Repeat this
sequence
(press/hold/
release) up to 3 times to
complete programming.
If the garage door opener
motor operates when the
HomeLink
®
button
is
pressed, the garage door
opener motor recognizes the
HomeLink
®
signal.
■
Enabling 2-way communication with a garage door (only avail-
able for compatible devices)
When enabled, 2-way communication allows you to check the sta-
tus of the opening and closing of a garage door through indicators
in your vehicle.
2-way communication is only available if the garage door opener
motor used is a compatible device. (To check device compatibility,
refer to www.HomeLink.com.)
Within 5 seconds after programming the garage door opener has
been completed, if the garage door opener motor is trained to
HomeLink
®
, both garage door operation indicators will flash rap-
idly green and the light on the garage door opener motor will
blink twice, indicating that 2-way communication is enabled.
If the indicators do not flash, perform
and
within the first 10
presses of the HomeLink
®
button after programming has been
completed.
Press a programmed HomeLink
®
button to operate a garage
door.
Within 1 minute of pressing the HomeLink
®
button, after the
garage door operation has stopped, press the “Learn” or “Smart”
button on the garage door opener motor. Within 5 seconds of the
establishment of 2-way communication with the garage door
opener, both garage door operation indicators in the vehicle will
flash rapidly green and the light on the garage door opener motor
will blink twice, indicating that 2-way communication is enabled.
3
1
2
3
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
378
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
■
Reprogramming a single HomeLink
®
button
When the following procedure is performed, buttons which already
have devices registered to them can be overwritten:
With one hand, press and hold the desired HomeLink
®
button.
When the HomeLink
®
indicator starts flashing orange, continue
to hold the HomeLink
®
button and perform “Programming the
HomeLink
®
”
(it takes 20 seconds for the HomeLink
®
indicator
to start flashing).
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator
light should turn on.
The status of the opening and
closing of a garage door is shown
by the indicators.
Opening
Closing
This function is only available if the
garage door opener motor used is
a compatible device. (To check
device compatibility, refer to
www.HomeLink.com.)
The indicators can operate within approximately 820 ft. (250 m) of the
garage door. However, if there are obstructions between the garage
door and the vehicle, such as houses and trees, feedback signals
from the garage door may not be received. To recall the previous door
operation status, press and release either HomeLink
®
buttons
and
or
and
simultaneously. The last
recorded status will be displayed for 3 seconds.
Operating the HomeLink
®
Garage door operation indicators
1
2
1
1
2
Color
Status
Orange (flashing)
Currently opening/closing
Green
Opening/closing has completed
Red (flashing)
Feedback signals cannot be received
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
379
5-4. Using the other interior features
5
In
Press and hold the 2 outside but-
tons for 10 seconds until the
HomeLink
®
indicator
light
changes from continuously lit
orange to rapidly flashing green.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
®
memory.
■
Codes stored in the HomeLink
®
memory
●
The registered codes are not erased even if the battery cable is discon-
nected.
●
If learning failed when registering a different code to a HomeLink
®
button
that already has a code registered to it, the already registered code will not
be erased.
■
Before programming
●
Install a new battery in the transmitter.
●
The battery side of the transmitter must be pointed away from the Home-
Link
®
.
■
Certification for the garage door opener
For vehicles sold in the U.S.A.
FCC ID: NZLAECHL5
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
For vehicles sold in Canada
NOTE:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, includ-
ing interference that may cause undesired operation of the device.
REMARQUE:
Le present appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisee aux deux
conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi,
meme si le brouillage est susceptible d’en compromettre le fonctionnement.
Erasing the entire HomeLink
®
memory (all three codes)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
380
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
■
About HomeLink
®
HomeLink and HomeLink house icon are registered trademarks of Gentex
Corporation.
■
When support is necessary
For compatible products and video programming instructions, please visit
www.homelink.com/toyota, www.youtube.com/user/HomeLinkGentex, or call
the toll-free HomeLink Hotline at 1-800-355-3515 (North America).
WARNING
■
When programming a garage door or other remote control device
The garage door or other device may operate, so ensure people and
objects are out of danger to prevent potential harm.
■
Conforming to federal safety standards
Do not use the HomeLink
®
compatible transceiver with any garage door
opener or device that lacks safety stop and reverse features as required by
federal safety standards. This includes any garage door that cannot detect
an interfering object. A door or device without these features increases the
risk of death or serious injury.
■
When operating or programming HomeLink
®
Never allow a child to operate or play with the HomeLink
®
buttons.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
381
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
5
In
Compass
To turn the compass on or off,
press and hold the button for 3
seconds.
: If equipped
The compass on the inside rear view mirror indicates the direc-
tion in which the vehicle is heading.
Operation
Displays and directions
Display
Direction
N
North
NE
Northeast
E
East
SE
Southeast
S
South
SW
Southwest
W
West
NW
Northwest
-------------------------------------------------------------------------------------------------------------------------------------------------------------
382
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
The direction display deviates from the true direction determined by
the earth’s magnetic field. The amount of deviation varies according to
the geographic position of the vehicle.
If you cross over a map boundary shown in illustration, the compass will
deviate.
To obtain higher precision or perfect calibration, refer to the following.
■
Deviation calibration
Stop the vehicle.
Press and hold the button for
6 seconds.
A number (1 to 15) appears
on the compass display.
Press the button and referring to the map above, select the num-
ber of the zone where you are.
If the direction is displayed several seconds after adjustment, the cali-
bration is complete.
Calibrating the compass
Samoa: 5 Guam: 8 Saipan: 8
1
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
383
5-4. Using the other interior features
5
In
■
Circling calibration
Stop the vehicle in a place where it is safe to drive in a circle.
Press and hold the button for
9 seconds.
“C” appears on the compass
display.
Drive the vehicle at 5 mph (8
km/h) or less in a circle until
a direction is displayed.
If there is not enough space to
drive in a circle, drive around the
block until the direction is dis-
played.
■
Conditions unfavorable to correct operation
The compass may not show the correct direction in the following conditions:
●
The vehicle is stopped immediately after turning.
●
The vehicle is on an inclined surface.
●
The vehicle is in a place where the earth’s magnetic field is subject to inter-
ference by artificial magnetic fields (underground car park/parking lot, under
a steel tower, between buildings, roof car park/parking lot, near an intersec-
tion, near a large vehicle, etc.).
●
The vehicle has become magnetized.
(There is a magnet or metal object near the inside rear view mirror.)
●
The battery has been disconnected.
●
A door is open.
1
2
3
WARNING
■
While driving the vehicle
Do not adjust the display. Adjust the display only when the vehicle is
stopped.
■
When doing the circling calibration
Secure a wide space, and watch out for people and vehicles in the vicinity.
Do not violate any local traffic rules while performing circling calibration.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
384
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
NOTICE
■
To avoid compass malfunctions
Do not place magnets or any metal objects near the inside rear view mirror.
Doing this may cause the compass sensor to malfunction.
■
To ensure normal operation of the compass
●
Do not perform circling calibration of the compass in a place where the
earth’s magnetic field is subject to interference by artificial magnetic fields.
●
During calibration, do not operate electric systems (moon roof, power win-
dows, etc.) as they may interfere with the calibration.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
385
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
5
In
Safety Connect
Microphone
*
LED light indicators
“SOS” button
*
: The installation position of the
microphone may differ for vehicles
with moon roof.
: If equipped
Safety Connect is a subscription-based telematics service that
uses Global Positioning System (GPS) data and embedded cel-
lular technology to provide safety and security features to sub-
scribers. Safety Connect is supported by Toyota’s designated
response center, which operates 24 hours per day, 7 days per
week.
Safety Connect service is available by subscription on select,
telematics hardware-equipped vehicles.
By using the Safety Connect service, you are agreeing to be
bound by the Telematics Subscription Service Agreement and
its Terms and Conditions, as in effect and amended from time to
time, a current copy of which is available at Toyota.com in the
United States, Toyotapr.com in Puerto Rico and Toyota.ca in
Canada. All use of the Safety Connect service is subject to such
then-applicable Terms and Conditions.
System components
1
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
386
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
Subscribers have the following Safety Connect services available:
●
Automatic Collision Notification
*
Helps drivers receive necessary response from emergency service
providers. (
*
: U.S. Patent No. 7,508,298 B2
●
Stolen Vehicle Location
Helps drivers in the event of vehicle theft. (
●
Emergency Assistance Button (SOS)
Connects drivers to response-center support. (
●
Enhanced Roadside Assistance
Provides drivers various on-road assistance. (
After you have signed the Telematics Subscription Service Agreement
and are enrolled, you can begin receiving services.
A variety of subscription terms is available for purchase. Contact your
Toyota dealer, call the following appropriate Safety Connect response
center or push the “SOS” button in your vehicle for further subscription
details.
• The United States
1-855-405-6500
• Canada
1-888-869-6828
• Puerto Rico
1-877-855-8377
Services
Subscription
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
387
5-4. Using the other interior features
5
In
■
Safety Connect Services Information
●
Phone calls using the vehicles Bluetooth
®
technology will not be possible
during Safety Connect.
●
Safety Connect is available beginning Fall 2009 on select Toyota models (in
the contiguous United States only). Contact with the Safety Connect
response center is dependent upon the telematics device being in operative
condition, cellular connection availability, and GPS satellite signal reception,
which can limit the ability to reach the response center or receive emer-
gency service support. Enrollment and Telematics Subscription Service
Agreement are required. A variety of subscription terms is available;
charges vary by subscription term selected and location.
●
Automatic Collision Notification, Emergency Assistance and Stolen Vehicle
Location are available in the United States, including Hawaii and Alaska,
Puerto Rico and Canada, and Enhanced Roadside Assistance are available
in the United States, Puerto Rico and Canada.
●
Automatic Collision Notification, Emergency Assistance, Stolen Vehicle and
Enhanced Road Assistance are not available in the U.S. Virgin Islands.
For vehicles first sold in the U.S. Virgin Islands, no Safety Connect services
will function in or outside the U.S. Virgin Islands.
●
Safety Connect services are not subject to section 255 of the Telecommuni-
cations Act and the device is not TTY compatible.
■
Languages
The Safety Connect response center will offer support in multiple languages.
The Safety Connect system will offer voice prompts in English, Spanish, and
French. Please indicate your language of choice when enrolling.
■
When contacting the response center
You may be unable to contact the response center if the network is busy.
When the engine switch is turned to the “ON” position (vehicles with-
out a smart key system) or IGNITION ON mode (vehicles with a smart
key system), the red indicator light comes on for 2 seconds then turns
off. Afterward, the green indicator light comes on, indicating that the
service is active.
The following indicator light patterns indicate specific system usage
conditions:
●
Green indicator light on = Active service
●
Green indicator light flashing = Safety Connect call in process
●
Red indicator light (except at vehicle start-up) = System malfunction
(contact your Toyota dealer)
●
No indicator light (off) = Safety Connect service not active
Safety Connect LED light Indicators
-------------------------------------------------------------------------------------------------------------------------------------------------------------
388
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
■
Automatic Collision Notification
In case of either airbag deployment or severe rear-end collision, the
system is designed to automatically call the response center. The
responding agent receives the vehicle’s location and attempts to
speak with the vehicle occupants to assess the level of emergency.
If the occupants are unable to communicate, the agent automati-
cally treats the call as an emergency, contacts the nearest emer-
gency services provider to describe the situation, and requests that
assistance be sent to the location.
■
Stolen Vehicle Location
If your vehicle is stolen, Safety Connect can work with local author-
ities to assist them in locating and recovering the vehicle. After filing
a police report, call the Safety Connect response center at 1-855-
405-6500 in the United States, 1-877-855-8377 in Puerto Rico or 1-
888-869-6828 in Canada, and follow the prompts for Safety Con-
nect to initiate this service.
In addition to assisting law enforcement with recovery of a stolen
vehicle, Safety-Connect-equipped vehicle location data may, under
certain circumstances, be shared with third parties to locate your
vehicle. Further information is available at Toyota.com in the United
States, Toyotapr.com in Puerto Rico and Toyota.ca in Canada.
■
Emergency Assistance Button (“SOS”)
In the event of an emergency on the road, push the “SOS” button to
reach the Safety Connect response center. The answering agent
will determine your vehicle’s location, assess the emergency, and
dispatch the necessary assistance required.
If you accidentally press the “SOS” button, tell the response-center
agent that you are not experiencing an emergency.
Safety Connect services
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
389
5-4. Using the other interior features
5
In
■
Enhanced Roadside Assistance
Enhanced Roadside Assistance adds GPS data to the already
included warranty-based Toyota roadside service.
Subscribers can press the “SOS” button to reach a Safety Connect
response-center agent, who can help with a wide range of needs,
such as: towing, flat tire, fuel delivery, etc. For a description of the
Enhanced Roadside Assistance services and their limitations,
please see the Safety Connect Terms and Conditions, which are
available at Toyota.com in the United States, Toyotapr.com in
Puerto Rico and Toyota.ca in Canada.
Important! Read this information before using Safety Connect.
■
Exposure to radio frequency signals
The Safety Connect system installed in your vehicle is a low-power
radio transmitter and receiver. It receives and also sends out radio
frequency (RF) signals.
In August 1996, the Federal Communications Commission (FCC)
adopted RF exposure guidelines with safety levels for mobile wire-
less phones. Those guidelines are consistent with the safety stan-
dards previously set by the following U.S. and international
standards bodies.
●
ANSI (American National Standards Institute) C95.1 [1992]
●
NCRP (National Council on Radiation Protection and Measure-
ment) Report 86 [1986]
●
ICNIRP (International Commission on Non-Ionizing Radiation
Protection) [1996]
Those standards were based on comprehensive and periodic eval-
uations of the relevant scientific literature. Over 120 scientists, engi-
neers, and physicians from universities, and government health
agencies and industries reviewed the available body of research to
develop the ANSI Standard (C95.1).
The design of Safety Connect complies with the FCC guidelines in
addition to those standards.
Safety information for Safety Connect
-------------------------------------------------------------------------------------------------------------------------------------------------------------
390
SIENNA_OM_OM08035U_(U)
5-4. Using the other interior features
■
Certification for Safety Connect
-------------------------------------------------------------------------------------------------------------------------------------------------------------
391
SIENNA_OM_OM08035U_(U)
6
Maintenance and care
6-1. Maintenance and care
Cleaning and protecting
the vehicle exterior. . .. 392
Cleaning and protecting
the vehicle interior. . ... 395
6-2. Maintenance
Maintenance
requirements. . . . ... 398
General maintenance. . 401
Emission inspection and
maintenance (I/M)
programs. . . . . . . 404
6-3. Do-it-yourself maintenance
Do-it-yourself service
precautions . . . . . . 405
Hood . . . . . . . . . 407
Positioning a floor jack . .. 409
Engine compartment. . . 410
Tires . . . . . . . . .. 420
Tire inflation pressure . ... 429
Wheels . . . . . . . .. 432
Air conditioning filter. . .. 434
Wireless remote control/
electronic key battery. .. 436
Checking and replacing
fuses . . . . . . . ... 439
Light bulbs. . . . . . . 442
-------------------------------------------------------------------------------------------------------------------------------------------------------------
392
SIENNA_OM_OM08035U_(U)
Cleaning and protecting the vehicle exterior
●
Working from top to bottom, liberally apply water to the vehicle
body, wheel wells and underside of the vehicle to remove any dirt
and dust.
●
Wash the vehicle body using a sponge or soft cloth, such as a
chamois.
●
For hard-to-remove marks, use car wash soap and rinse thoroughly
with water.
●
Wipe away any water.
●
Wax the vehicle when the waterproof coating deteriorates.
If water does not bead on a clean surface, apply wax when the vehicle
body is cool.
■
Automatic car washes
●
Before washing the vehicle:
• Fold the mirrors.
• Turn off the power back door system. (if equipped)
• Turn off the power sliding door system. (if equipped)
Start washing from the front of the vehicle. Make sure to extend the mirrors
before driving.
●
Brushes used in automatic car washes may scratch the vehicle surface and
harm your vehicle’s paint.
■
High pressure car washes
●
Do not allow the nozzles of the car wash to come within close proximity of
the windows.
●
Before using the car wash, check that the fuel filler door on your vehicle is
closed properly.
■
When using a car wash (vehicles with a smart key system)
●
If the door handle becomes wet while the electronic key is within the effec-
tive range, the door may lock and unlock repeatedly. Place the key in a posi-
tion 6 ft. (2 m) or more separate from the vehicle while the vehicle is being
washed. (Take care to ensure that the key is not stolen.)
●
If the electronic key is inside the vehicle and a door handle becomes wet
during a car wash, a message may be shown on the multi-information dis-
play and a buzzer will sound outside the vehicle. To turn off the alarm, lock
all the doors.
Perform the following to protect the vehicle and maintain it in
prime condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
393
6-1. Maintenance and care
6
Mainten
■
Aluminum wheels
●
Remove any dirt immediately by using a neutral detergent.
●
Wash detergent off with water immediately after use.
●
To protect the paint from damage, make sure to observe the following pre-
cautions.
• Do not use acidic, alkaline or abrasive detergent
• Do not use hard brushes
• Do not use detergent on the wheels when they are hot, such as after driv-
ing or parking in hot weather
■
Bumpers and side moldings
Do not scrub with abrasive cleaners.
WARNING
■
When washing the vehicle
Do not apply water to the inside of the engine compartment. Doing so may
cause the electrical components etc. to catch fire.
■
When cleaning the windshield (vehicles with rain-sensing windshield
wiper)
●
When the upper part of the windshield where the raindrop sensor is
located is touched by hand
●
When a wet rag or similar is held close to the raindrop sensor
●
If something bumps against the windshield
●
If you directly touch the raindrop sensor body or if something bumps into
the raindrop sensor
■
Precautions regarding the exhaust pipe
Exhaust gasses cause the exhaust pipe to become quite hot.
When washing the vehicle, be careful not to touch the pipe until it has
cooled sufficiently, as touching a hot exhaust pipe can cause burns.
■
Precaution regarding the Blind Spot Monitor (if equipped)
If the paint of the rear bumper is chipped or scratched, the system may mal-
function. If this occurs, consult your Toyota dealer.
Set the wiper switch to off.
If the wiper switch is in “AUTO”, the wip-
ers may operate unexpectedly in the fol-
lowing situations, and may result in
hands being caught or other serious inju-
ries and cause damage to the wiper
blades.
Off
-------------------------------------------------------------------------------------------------------------------------------------------------------------
394
SIENNA_OM_OM08035U_(U)
NOTICE
■
To prevent paint deterioration and corrosion on the body and compo-
nents (aluminum wheels etc.)
●
Wash the vehicle immediately in the following cases:
• After driving near the sea coast
• After driving on salted roads
• If coal tar or tree sap is present on the paint surface
• If you see dead insects, insect droppings or bird droppings on the paint
• After driving in an area contaminated with soot, oily smoke, mine dust,
iron powder or chemical substances
• If the vehicle becomes heavily soiled in dust or mud
• If liquids such as benzene and gasoline are spilled on the paint surface
●
If the paint is chipped or scratched, have it repaired immediately.
●
To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing wheels.
■
Cleaning the exterior lights
●
Wash carefully. Do not use organic substances or scrub with a hard brush.
This may damage the surface of the lights.
●
Do not apply wax on the surfaces of the lights.
Wax may cause damage to the lenses.
■
When using an automatic car wash (vehicles with rain-sensing wind-
shield wipers)
Set the wiper switch to the off position. If the wiper switch is in “AUTO”, the
wipers may operate and the wiper blades may be damaged.
■
When using a high pressure car wash
Do not bring the nozzle tip close to boots (rubber or resin manufactured
cover), connectors or the following parts. The parts may be damaged if they
come into contact with high-pressure water.
• Traction related parts
• Steering parts
• Suspension parts
• Brake parts
-------------------------------------------------------------------------------------------------------------------------------------------------------------
395
SIENNA_OM_OM08035U_(U)
6-1. Maintenance and care
6
Mainten
Cleaning and protecting the vehicle interior
●
Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces
with a cloth dampened with lukewarm water.
●
If dirt cannot be removed, wipe it off with a soft cloth dampened with
neutral detergent diluted to approximately 1%.
Wring out any excess water from the cloth and thoroughly wipe off
remaining traces of detergent and water.
●
Remove dirt and dust using a vacuum cleaner.
●
Wipe off any excess dirt and dust with a soft cloth dampened with
diluted detergent.
Use a diluted water solution of approximately 5% neutral wool detergent.
●
Wring out any excess water from the cloth and thoroughly wipe off
all remaining traces of detergent.
●
Wipe the surface with a dry, soft cloth to remove any remaining
moisture. Allow the leather to dry in a shaded and ventilated area.
●
Remove dirt and dust using a vacuum cleaner.
●
Wipe it off with a soft cloth dampened with neutral detergent diluted
to approximately 1%.
●
Wring out any excess water from the cloth and thoroughly wipe off
remaining traces of detergent and water.
The following procedures will help protect your vehicle’s interior
and keep it in top condition:
Protecting the vehicle interior
Cleaning the leather areas
Cleaning the synthetic leather areas
-------------------------------------------------------------------------------------------------------------------------------------------------------------
396
SIENNA_OM_OM08035U_(U)
■
Caring for leather areas
Toyota recommends cleaning the interior of the vehicle at least twice a year to
maintain the quality of the vehicle’s interior.
■
Shampooing the carpets
There are several commercial foaming-type cleaners available. Use a sponge
or brush to apply the foam. Rub in overlapping circles. Do not use water.
Wipe dirty surfaces and let them dry. Excellent results are obtained by keep-
ing the carpet as dry as possible.
■
Seat belts
Clean with mild soap and lukewarm water using a cloth or sponge. Also
check the belts periodically for excessive wear, fraying or cuts.
WARNING
■
Water in the vehicle
●
Do not splash or spill liquid in the vehicle.
Doing so may cause electrical components etc. to malfunction or catch
fire.
●
Do not get any of the SRS components or wiring in the vehicle interior wet.
(
An electrical malfunction may cause the airbags to deploy or not function
properly, resulting in death or serious injury.
■
Cleaning the interior (especially instrument panel)
Do not use polish wax or polish cleaner. The instrument panel may reflect
off the windshield, obstructing the driver’s view and leading to an accident,
resulting in death or serious injury.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SIENNA_OM_OM08035U_(U)
397
6-1. Maintenance and care
6
Mainten
NOTICE
■
Cleaning detergents
●
Do not use the following types of detergent, as they may discolor the vehi-
cle interior or cause streaks or damage to painted surfaces:
• Non-seat portions: Organic substances such as benzene or gasoline,
alkaline or acidic solutions, dye, and bleach
• Seats: Alkaline or acidic solutions, such as thinner, benzene, and alco-
hol
●
Do not use polish wax or polish cleaner. The instrument panel’s or other
interior part’s painted surface may be damaged.
■
Preventing damage to leather surfaces
Observe the following precautions to avoid damage to and deterioration of
leather surfaces.
●
Remove any dust or dirt from leather surfaces immediately.
●
Do not expose the vehicle to direct sunlight for extended periods of time.
Park the vehicle in the shade, especially during summer.
●
Do not place items made of vinyl, plastic, or containing wax on the uphol-
stery, as they may stick to the leather surface if the vehicle interior heats
up significantly.
■
Water on the floor
Do not wash the vehicle floor with water.
Vehicle systems such as the audio/visual system may be damaged if water
comes into contact with electrical components such as the audio/visual sys-
tem above or under the floor of the vehicle. Water may also cause the body
to rust.
■
Cleaning the inside of the rear window and the rear quarter windows
●
Do not use glass cleaner to clean the rear window and the rear quarter
windows, as this may cause damage to the rear window defogger heater
wires or antenna. Use a cloth dampened with lukewarm water to gently
wipe the windows clean. Wipe the windows in strokes running parallel to
the heater wires or antenna.
●
Be careful not to scratch or damage the heater wires or antenna.
■
When cleaning the inside of the windshield
Do not allow glass cleaner to contact the lens. Also, do not touch the lens.
(
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст