Toyota Corolla (2020 year). Owner's manual — part 19

294

5-3. Connectivity settings

Symptom

Solution

An Apple CarPlay connec-
tion cannot be estab-
lished.

Check if the device supports Apple CarPlay.
Check if Apple CarPlay is enabled on the con-
nected device.
For details, refer to
https://www.apple.com/ios/carplay/.

Check if “Apple CarPlay” on the general set-
tings screen is set to on. (P.296)

Check if the Lightning cable being used is certi-
fied by Apple Inc., and if it is securely con-
nected to the device and USB port.

When the iPhone is connected using a USB
hub, etc., an Apple CarPlay connection may not
be established. Connect the lightning cable to
USB the port directly.

After checking all of the above, try to establish
an Apple CarPlay connection. (P.292)

When an Apple CarPlay
connection is established
and a video is being
played, the video is not
displayed, but audio is
output through the sys-
tem.

As the system is not designed to play video
through Apple CarPlay, this is not a malfunc-
tion.

Although an Apple Car-
Play connection is estab-
lished, audio is not output
through the system.

The system may muted or the volume may be
low. Increase the system volume.

The Apple CarPlay screen
has artifacts and/or audio
from Apple CarPlay has
noise.

Check if the Lightning cable being used to con-
nect the device to the system is damaged.
To check if the Lightning cable is damaged
internally, connect the device to another sys-
tem, such as a PC, and check if the device is
recognized by the connected system. (The
device should begin charging when connected.)

After checking all of the above, try to establish
an Apple CarPlay connection. (P.292)

295

5-3. Connectivity settings

5

Entune au

dio

*

: Applications not compatible with Apple CarPlay are applications installed

on the iPhone that are not displayed on the Apple CarPlay screen appli-
cation list. (such as visual voicemail)

During Apple CarPlay
music application (Apple
Music, Spotify, etc.) play-
back, if the iPhone is
operated to start and play
audio from an application
that is not compatible with
Apple CarPlay

*

and the

onboard device volume is
changed, the audio of the
incompatible application
stops and the system
resumes playback of the
original music application.

This operation is performed according to the
specification of the onboard device, this is not a
malfunction.

After interrupt audio (such
as navigation route guid-
ance) is played from an
application that is not
compatible with Apple
CarPlay while the onboard
device is playing audio
(FM/AM, CD, etc.), the
system does not resume
playback of the original
audio (FM/AM, CD, etc.).

This operation is performed according to the
specification of the onboard device, this is not a
malfunction.
Manually change the audio source by yourself.
Or, do not use applications that are not compat-
ible with Apple CarPlay.

*

Due to some naviga-

tion applications are compatible from iOS 12,
update to the latest iOS and application ver-
sions.

Symptom

Solution

296

5-4. Other settings

5-4.Other settings

1

Press the “MENU” button.

2

Select “Setup”.

If the general settings screen is not

displayed, select “General”.

3

Select the desired items to
be set.



“Clock”

Select to change the time zone and
select “On” or “Off” for daylight sav-
ing time, automatic adjustment of
the clock, etc. (P.297)



“Language”

Select to change the language. The
language setting of Apple CarPlay
can only be changed on the con-
nected iPhone.



“Customize Home Screen”

Select to change the display infor-
mation/area on the home screen
and the home screen layout.
(P.270)



“Theme Setting”

Select to change the screen theme
setting.



“Beep”

Select to turn the beep sound
on/off.



“Units of Measurement”

Select to change the unit of mea-
sure for distance/fuel consumption.



“Keyboard Layout”

Select to change the keyboard lay-
out.



“Delete Keyboard History”

Select to delete the keyboard his-
tory.



“Memorize Keyboard History”

Select to set the memorize key-
board history on/off.



“Animation”

Select to turn the animations on/off.



“Apple CarPlay”

*1

Select to turn automatic Apple Car-
Play connection establishment
on/off when a compatible iPhone is
connected to the system via USB.



“Driver Setting”

General settings

Settings are available for
clock, operation sounds,
etc.

Displaying the general
settings screen

General settings screen

297

5-4. Other settings

5

Entune au

dio

Select to change the driver set-
tings. (P.298)



“Delete Personal Data”

Select to delete personal data.
(P.298)



“Software Update”

Select to update software versions.
For details, contact your Toyota
dealer.



“Software Update Setting”

*2

Select to set software update set-
ting. (P.299)



“Gracenote Database
Update”

Select to update Gracenote

®

data-

base versions. For details, contact
your Toyota dealer.



“Software Information”

Select to display the software infor-
mation. Notices related to third
party software used in this product
are enlisted. (This includes instruc-
tions for obtaining such software,
where applicable.)



“SW Sensitivity Level”

Select to change the capacitive
touch screen button sensitivity to 1
(low), 2 (medium), or 3 (high).

*1

:This function is not made avail-

able in some countries or areas.

*2

:If equipped

1

Display the general settings
screen. (P.296)

2

Select “Clock”.

3

Select the desired items to
be set.

Select to change the time
zone. (P.297)
Select to set daylight saving
time on/off.
Select to set automatic
adjustment of the clock by
GPS on/off.
When set to off, the clock can
be manually adjusted.
(P.297)
Select to set the 24 hour time
format on/off.
When set to off, the clock is
displayed in 12 hour time for-
mat.

1

Select “Time Zone”.

2

Select the desired time zone.

When “Auto Adjust by GPS” is
turned off, the clock can be
manually adjusted.

1

Select “Auto Adjust by GPS”
to set to off.

Clock settings

Setting the time zone

Manual clock setting

298

5-4. Other settings

2

Adjust the clock manually.

Select “+” to set the time for-
ward one hour and “-” to set
the time back one hour.
Select “+” to set the time for-
ward one minute and “-” to
set the time back one minute.
Select to round to the nearest
hour.
e.g.
1:00 to 1:29  1:00
1:30 to 1:59  2:00

The driver settings feature will
allow the system to link some
preferences (such as audio pre-
sets, screen theme, language,
etc.) to a paired Bluetooth

®

phone.

1

Display the general settings
screen. (P.296)

2

Select “Driver Setting”.

3

Select “Enable This Feature”.

1

Select “Manually Select
Linked Settings”.

2

Select the desired phone.

After a few seconds, loaded screen
automatically switches to the home
screen.

Registered or changed per-
sonal settings will be deleted or
returned to their default condi-
tions.

1

Display the general settings
screen. (P.296)

2

Select “Delete Personal
Data”.

3

Select “Delete”.

Driver settings

Manually select linked set-
tings

Deleting personal data

299

5-4. Other settings

5

Entune au

dio

4

Select “Yes” when the confir-
mation screen appears.

Examples of settings that can be

returned to their default conditions:



Audio settings



Phone settings

etc.

*

: This function is not made avail-

able in some countries or areas.

When the automatic update
check function is enabled, if a
software update is available
from the Toyota Entune center, a
message will be displayed.

1

Display the general settings
screen. (P.296)

2

Select “Software Update Set-
ting”.

3

Select “Automatic Update
Check” to enable/disable the
automatic update check func-
tion.

When software update information

is displayed, contact your Toyota

dealer.

1

Press the “MENU” button.

2

Select “Setup”.

3

Select “Voice”.

4

Select the desired items to
be set.

Select to adjust the volume of
voice guidance.
Select to set the voice recog-
nition prompts.
Select to train voice recogni-
tion.

Software update settings

*

Voice settings

Voice volume, etc. can be
set.

Displaying the voice set-
tings screen

Voice settings screen

300

5-4. Other settings

The voice command system
adapts the user accent.
Select to start the voice rec-
ognition tutorial.
Select to set the voice
prompt interrupt on/off.
Select to reset all setup
items.

1

Press the “MENU” button.

2

Select “Setup”.

3

Select “Vehicle”.

4

Select the desired items to
be set.

Select to set vehicle customi-
zation. (P.548)
Select to set valet mode.
(P.301)

Vehicle settings

Settings are available for
vehicle customization, etc.

Displaying the vehicle
settings screen

Vehicle settings screen

301

5-4. Other settings

5

Entune au

dio

The security system can be set
to on by entering a security code
(4-digit number).
When set to on, the system will
become inoperative once the
electrical power source is dis-
connected until the security
code is entered.

1

Display the vehicle settings
screen. (P.300)

2

Select “Valet Mode”.

3

Enter the 4-digit personal
code and select “OK”.

4

Enter the same 4-digit per-
sonal code again and select
“OK”.



The system will request that
you input the security code
again to confirm that you
remember it correctly.



When valet mode activates,
the system stops and a secu-
rity code (4-digit number)
standby screen is displayed.

If the 4-digit personal code is forgot-

ten, please contact your Toyota

dealer.

Enter the 4-digit personal code
and select “OK”.

If an incorrect security code (4-digit

number) is entered 6 times, the sys-

tem will not accept another security

code (4-digit number) for 10 min-

utes.

Setting the valet mode

If the valet mode has been
activated

302

5-5. Using the audio/visual system

5-5.Using the audio/visual system

The audio control screen can be reached by the following methods:



From the “AUDIO” button

Press the “AUDIO” button.



From the “MENU” button

Press the “MENU” button, then select “Audio”.

• Using the radio (P.307)
• Playing a USB memory (P.311)
• Playing an iPod/iPhone (P.313)
• Playing a Bluetooth

®

device (P.316)

• Using the AUX port (P.319)
• Using the steering wheel audio switches (P.321)
• Audio system settings (P.323)

Quick reference

Functional overview

303

5-5. Using the audio/visual system

5

Entune au

dio

“POWER VOLUME” knob:
Press to turn the audio/visual
system on and off. The system
turns on in the last mode used.
Turn this knob to adjust the vol-
ume.

1

Press the “AUDIO” button.

2

Select “Source” or press
“AUDIO” button again.

3

Select the desired source.

●

Dimmed screen buttons cannot be

operated.

●

When there are two pages, select

or

to change the page.

●

When an Apple Carplay connec-

tion is established, some system

functions, such as the following,

will be replaced by similar Apple

CarPlay function or will become
unavailable

*

:

• iPod (Audio Playback)

• USB audio/USB video
• Bluetooth

®

audio

• Toyota Entune App Suite Connect

*

: This function is not made avail-

able in some countries or areas.

1

Display the audio source
selection screen. (P.303)

2

Select “Reorder”.

Some basics

This section describes
some of the basic features
of the audio/visual system.
Some information may not
pertain to your system.

Your audio/visual system
works when the engine
switch is in ACC or ON.

NOTICE

To prevent the battery from being

discharged, do not leave the

audio/visual system on longer

than necessary when the engine

is not running.

Turning the system on
and off

Selecting an audio source

Reordering the audio
source

304

5-5. Using the audio/visual system

3

Select the desired audio
source then

or

to reor-

der.

4

Select “OK”.

1

Connect a device.

Turn on the power of the device if it

is not turned on.

●

The AUX port only supports audio

input.

●

If a USB hub is plugged-in, two

devices can be connected at a

time.

●

Even if a USB hub is used to con-

nect more than two USB devices,

only the first two connected

devices will be recognized.

●

If a USB hub that has more than

two ports is connected to the USB

port, devices connected to the

USB hub may not charge or be

inoperable, as the supply of cur-

rent may be insufficient.

1

Display the audio control
screen. (P.303)

2

Select “Sound”.

3

Select the desired item to be
set.

Select to set the tre-
ble/mid/bass. (P.304)
Select to set the fader/bal-
ance. (P.305)
Select to set the automatic
sound levelizer. (P.305)

■

Treble/Mid/Bass

How good an audio program
sounds is largely determined by
the mix of the treble, mid and
bass levels. In fact, different
kinds of music and vocal pro-
grams usually sound better with
different mixes of treble, mid
and bass.

1

Select “Treble/Mid/Bass”.

2

Select the desired screen
button.

Select “+” or “-” to adjust
high-pitched tones.

USB/AUX port

Sound settings

305

5-5. Using the audio/visual system

5

Entune au

dio

Select “+” or “-” to adjust
mid-pitched tones.
Select “+” or “-” to adjust
low-pitched tones.

■

Fader/Balance

A good balance of the left and
right stereo channels and of the
front and rear sound levels is
also important.
Keep in mind that when listening
to a stereo recording or broad-
cast, changing the right/left bal-
ance will increase the volume of
1 group of sounds while
decreasing the volume of
another.

1

Select “Fader/Balance”.

2

Select the desired screen
button.

Select to adjust the sound
balance between the front
and rear speakers.
Select to adjust the sound
balance between the left and
right speakers.

■

Automatic sound levelizer
(ASL)

The system adjusts to the opti-
mum volume and tone quality

according to vehicle speed to
compensate for increased road
noise, wind noise, or other
noises while driving.

1

Select “Automatic Sound
Levelizer”.

2

Select “High”, “Mid”, “Low” or
“Off”.

■

Screen format settings

The screen format can be
selected for USB video.

1

Press the “MENU” button.

2

Select “Setup”.

3

Select “Audio”.

4

Select “Common”.

5

Select “Screen Format”.

6

Select the desired item to be
adjusted.

Select to display a 4 : 3
screen, with either side in
black.
Select to enlarge the image
horizontally and vertically to
full screen.
Select to enlarge the image
by the same ratio horizontally

Audio screen adjustment

306

5-5. Using the audio/visual system

and vertically.

■

Contrast and brightness
adjustment

The contrast and brightness of
the screen can be adjusted.

1

Press the “MENU” button.

2

Select “Setup”.

3

Select “Audio”.

4

Select “Common”.

5

Select “Display”.

6

Select the desired item to be
adjusted.



“Contrast”

“+”: Select to strengthen the con-
trast of the screen.
“-”: Select to weaken the contrast of
the screen.



“Brightness”

“+”: Select to brighten the screen.
“-”: Select to darken the screen.

Depending on the audio source,

some functions may not be avail-

able.

1

Press this switch to operate
the voice command system.

The voice command system and its

list of commands can be operated.

(P.336)

Voice command system

307

5-6. Radio operation

5

Entune au

dio

5-6.Radio operation

The radio operation screen can
be reached by the following
methods:
P.303

Select to display the audio
source selection screen.
Select to display the preset
stations screen. (P.307)
Select to display a list of
receivable stations. (P.308)
Select to display the radio
options screen. (P.308)
Select to display the sound
setting screen. (P.304)
Select to tune to preset sta-
tions/channels. (P.307)

Press to seek for stations in
the relevant program type.
Press and hold for continu-
ous seek.
Turn to step up/down fre-
quencies.
Turn to move up/down the
station. Also, the knob can be
used to enter selections on
the list screens by pressing it.

The radio automatically changes to

stereo reception when a stereo

broadcast is received.

Radio mode has a mix preset
function, which can store up to
36 stations (6 stations per page
x 6 pages) from any of the AM
or FM bands.

1

Tune in the desired station.

AM/FM radio

Overview

Control screen

Control panel

Presetting a station

308

5-6. Radio operation

2

Select and hold “(Add New)”.



When “(Add New)” is
selected, a confirmation mes-
sage appears. Select “Yes”
and select “OK”.



To change the preset station
to a different one, select and
hold the preset station.

The number of preset radio stations

displayed on the screen can be

changed. (P.323)

1

Select “Station List”.

2

Select “AM” or “FM”.

Select the desired program genre

when the genre selection screen is

displayed.

3

Select the desired station.

■

Refreshing the station list

1

Select “Refresh”.

“Cancel Refresh”: Select to can-
cel the refresh.
“Source”: Select to change to
another audio source while
refreshing.

●

The audio/visual system sound is

muted during refresh operation.

●

In some situations, it may take

some time to update the station

list.

1

Select “Options”.

2

Select the desired item to be
set.

Analog FM only: Select to
display RBDS text mes-
sages.
Select to scan for receivable
stations.

This audio/visual system is
equipped with Radio Broadcast
Data Systems (RBDS). RBDS
mode allows text messages to
be received from radio stations
that utilize RBDS transmitters.
When RBDS is on, the radio can
do the following functions.
• Only selecting stations of a

particular program type

• Displaying messages from

radio stations

• Searching for a stronger sig-

nal station

Selecting a station from
the list

Radio options

Radio broadcast data sys-
tem

309

5-6. Radio operation

5

Entune au

dio

RBDS features are available
only when listening to an FM
station that broadcasts RBDS
information and the “FM Info”
function is on. (P.308)

●

Other applications can be acti-

vated while listening to internet

radio.

●

Some parts of applications can be

adjusted using the switches on the

steering wheel.

●

For additional information, refer to

http://www.toyota.com/Entune/ or

call

1-800-331-4331 in the United

States,

http://www.toyota.ca/entune or call

1-888-869-6828 in Canada, and

http://www.toyotapr.com/entune or

call

1-877-855-8377 in Puerto Rico.

1

Display the audio source
selection screen. (P.303)

2

Select the desired application
screen button.



The internet radio application
screen is displayed.



Perform operations accord-
ing to the displayed applica-
tion screen.



For the instrument panel
operation method: P.303



If a compatible phone is

Internet radio

One of Toyota Entune App
Suite Connect features is
the ability to listen to inter-
net radio. In order to use
this service, a compatible
phone and the system
needs to be set up. For
details: P.379

Listening to internet radio