Toyota Prius Prime (2020 year). Owner's manual — part 15

232

3. Instrument cluster

■

Types of “Fuel Consumption Record”



When the unit is set to “MPH”

*

: This record is reset each time the hybrid system stops.



When the unit is set to “km/h”

*

: This record is reset each time the hybrid system stops.

Tab display

Recorded contents

Recorded range

“

1 miles”

Average electricity con-
sumption of every 1 mile
(1.6 km) driven

*

The last 15 miles (24.1 km)
driven

“

5 miles”

Average electricity con-
sumption of every 5 miles (8
km) driven

*

The last 30 miles (48.3 km)
driven

“

1 miles”

Average fuel consumption
of every 1 mile (1.6 km)
driven

*

The last 15 miles (24.1 km)
driven

“

5 miles”

Average fuel consumption
of every 5 miles (8 km)
driven

*

The last 30 miles (48.3 km)
driven

Tab display

Recorded contents

Recorded range

“

1 km”

Average electricity con-
sumption of every 1 km
(0.6 mile) driven

*

The last 15 km (9.3 miles)
driven

“

5 km”

Average electricity con-
sumption of every 5 km
(3.1 miles) driven

*

The last 30 km (18.6 miles)
driven

“

1 km”

Average fuel consumption
of every 1 km (0.6 mile)
driven

*

The last 15 km (9.3 miles)
driven

“

5 km”

Average fuel consumption
of every 5 km (3.1 miles)
driven

*

The last 30 km (18.6 miles)
driven

233

3. Instrument cluster

3

Instrument clus

ter

■

Switching the electricity and fuel consumption history screen

While the “Fuel Consumption Record” screen is displayed, press

.

The tab display is selected and it is possible to switch the contents of
the display.

Press

or

of the meter control switches to switch the con-

tents of the display.

Each time

is pressed, the display switches in the following order:



When the unit is set to “MPH”

“

1 miles”, “

5 miles”, “

1 miles” and “

5 miles”

*

1

. When

is pressed, it switches in the reverse order.



When the unit is set to “km/h”

“

1 km”, “

5 km”, “

1 km” and “

5 km”

*

2

. When

is

pressed, it switches in the reverse order.

*

1

: After “

5 miles”, the display returns to “

1 miles”.

*

2

: After “

5 km”, the display returns to “

1 km”.

1

2

234

3. Instrument cluster

◆

“Drive Monitor”

Displays information such as the driving time and average vehicle
speed, which are linked with the current mileage display. (

P. 211)

Current contents of the dis-
play

Displayed information shows
which driving record the cur-
rently displayed contents are
based on.

“Elapsed Time”
“Average Speed”
“EV Driving Ratio”

For the displayed distance of the mileage display, the percent traveled
using only electric motor power is displayed.

Each time

is pressed, the mileage display (

P. 211) switches

and the contents of the “Drive monitor” change as follows.

*

1

: When the average fuel consumption is reset (

P. 212), the “Drive monitor”

display is also reset.

*

2

: When the trip meter is reset (

P. 212), the “Drive monitor” display is also

reset.

*

3

: This item is reset each time the hybrid system starts.

1

2
3
4

Mileage display

Contents of the “Drive monitor”

ODO

After Reset

Information since last reset

*

1

TRIP A

TRIP A

Information based on driving record of
TRIP A

*

2

TRIP B

TRIP B

Information based on driving record of
TRIP B

*

2

After Start

Information since hybrid system was
started

*

3

Blank screen

1

235

3. Instrument cluster

3

Instrument clus

ter

◆

“Drive Monitor 2”

The following information of EV driving is displayed.

Total average electricity con-
sumption
Indicates the total average
electricity consumption since
last reset until it is reset
again.

*

1

EV driving range (without
using the air conditioning
system)
Indicates the estimated distance that can be driven using the cur-
rent remaining hybrid battery (traction battery). (

P. 108)

*

2

EV driving range (with using the air conditioning system)
Indicates the estimated distance that can be driven using the cur-
rent remaining hybrid battery (traction battery) while using the air
conditioning system.

*

2

*

1

: When “Electricity Consumption Reset” (

P. 248) is performed, the data

of the total electricity consumption is deleted.

*

2

: The EV driving range may shorten even when not driving due to power

consumption by the system.

1

2

3

236

3. Instrument cluster

◆

“Eco-Diary”

The history of the average electricity consumption, air conditioning
system load ratio (“A/C Load Ratio”)

*

, distance traveled and aver-

age fuel consumption can be displayed in a table according to day
(“Daily”) or month (“Monthly”) units.

*

: It indicates the percentage of the electricity consumed from the hybrid

battery (traction battery) that is consumed by the air conditioning sys-
tem.

■

How to read the display

Record of the day/month
Date/month of stored information
Average electricity consumption of the day/month
“A/C Load Ratio” of the day/month
Total distance traveled for the day/month
Average fuel consumption of the day/month
Tab display

The display can be switched by pressing

to enter the select condi-

tion, and then operating

or

of the meter control switches.

1
2
3
4
5
6
7

237

3. Instrument cluster

3

Instrument clus

ter

■

Checking history
When each screen is selected, past records from the following

ranges can be displayed by pressing

or

of the meter con-

trol switches.

● If the above number of records is exceeded, the oldest informa-

tion is deleted.

● To reset the history, perform “History Reset” in the “Meter Cus-

tomize” settings (

P. 246). (“Daily” and “Monthly” information

can be reset independently.)

■

Calendar setting
P. 249

The clock settings can be
changed.

Displayed screen

Displayed information

Stored information

“Daily”

4 reports

Up to 32 reports

(8 screens)

“Monthly”

Up to 24 reports

(6 screens)

Clock setting display

Item

Setting result

Adjusts the clock.
(

P. 197)

Sets the minutes to
“00”. (

P. 198)

238

3. Instrument cluster

Displays a compass linked with
the navigation system. Also, when
the navigation system is perform-
ing intersection guidance during
destination guidance, the inter-
section guidance is also displayed
on the multi-information display.

The illustration is only an example
and may differ from the actual
screen.
For details on how to set the destination and switch the map direction,
refer to “NAVIGATION SYSTEM OWNER’S MANUAL”.

The information about the cur-
rently selected audio source is
displayed.

The illustration is only an example
and may differ from the actual
screen.
To switch the audio source, press

to display the audio source

selection screen, press

or

of the meter control switches and
select the desired audio source,
and then press

.

To stop audio source selection, press

on the audio source selection

screen.

Navigation system-linked display (if equipped)

Audio system-linked display

239

3. Instrument cluster

3

Instrument clus

ter

The condition of the air conditioning system settings can be checked
on the screen and the air conditioning system settings can be
changed using the meter control switches.

On the air conditioning settings screen, press

or

of the meter con-

trol switches to switch the contents of the display.
For details regarding the air conditioning system function, refer to P. 500
and 511.

■

Screen display and setting items that can be changed

Air conditioning system settings screen

240

3. Instrument cluster

*

1

: “LO” is displayed if the temperature is adjusted to the lowest setting, and

“HI” is displayed if the temperature is adjusted to the highest setting.

*

2

: The selectable modes differ depending on whether a passenger is present.

(

P. 501, 513)

■

Adjusting the settings

Press

to display the cursor.

Press

or

of the meter control switches to select the

desired item to set.

Press

or

of the meter control switches to select the set-

ting item or setting value.

The air conditioning system cannot be stopped by performing opera-
tions on the air conditioning settings screen. Please use the air condi-
tioning switch or navigation system

*

to stop the air conditioning system.

*

: Vehicles with 11.6-inch display only

Item

Settings

Eco score
(A/C score)

P. 241

Temperature
setting

Changes according to operation of the meter control

switches

*

1

Outside air and
recirculated air
modes

(Outside air mode)

(Recirculated air mode)

Fan speed

1 to 7

“CLIMATE
CONTROL”

“NORMAL”

“ECO”

S-FLOW mode

“On (Driver

Priority)”

*

2

“On (Fr Seat

Only)”

*

2

“Off (All seat)”

1

2

3

4

5

6

1

2

3

241

3. Instrument cluster

3

Instrument clus

ter

■

Eco score (A/C score)
The current air conditioning system usage status is evaluated in 5
levels to determine whether it is Eco-friendly.
The evaluation changes according to the air conditioning system
usage status. When the power switch is turned off, the current total
driving score

*

1

and advice

*

2

related to using the air conditioning

system are displayed. (

P. 196)

Low score

*

3

High score

Avoiding excessive use of the
air conditioning system and
using the air conditioning sys-
tem at the appropriate setting
according to the ambient tem-
perature and number of passen-
gers and with the S-FLOW
mode (

) and “CLIMATE

CONTROL” will result in a high
evaluation.

*

1

: The Eco score (A/C score) is not evaluated for approximately 1 minute

after the power switch is turned to ON mode.

*

2

: This advice may not be displayed depending on the situation.

*

3

: For items not evaluated with an Eco score (A/C score), the display

reads 0.

■

Operating switches of the air conditioning system operation panel

●

The pop-up display function that displays when the air conditioning settings
are changed using the air conditioning system switches can be turned off in
the “Meter Customize” settings. (

P. 246)

1
2

●

When the air conditioning system
switches are operated to change the air
conditioning settings while a screen
other than the air conditioning system
settings screen is displayed on the multi-
information display, a pop-up display for
the air conditioning settings contents is
displayed. However, air conditioning
system settings cannot be changed on
the pop-up display.

242

3. Instrument cluster

■

Eco score (A/C score)

●

The setting status of the following air conditioning system functions are
reflected in the score.
• Temperature setting
• Fan speed setting
• Outside air and recirculated air modes
• “A/C” button
• S-FLOW mode
• “CLIMATE CONTROL”

●

The Eco score (A/C score) is evaluated according to the ambient tempera-
ture and cabin temperature. Accordingly, even if the same settings are
always used for the air conditioning system, the evaluation will change
according to such factors as the season and weather.

●

When the air conditioning system is not being used or the airflow mode is
set to

or

, the Eco score (A/C score) is not evaluated. (While the

air conditioning system is not evaluated, its usage status is not reflected in
the total Eco score result.)

●

The Eco score (A/C score) is a function that helps select an air conditioning
system setting which reduces electricity and fuel consumption, not a func-
tion that satisfies both comfortability and low fuel consumption.

243

3. Instrument cluster

3

Instrument clus

ter

The operation status of driving
support system such as the LDA
(Lane Departure Alert with steer-
ing control) and dynamic radar
cruise control with full-speed
range and warning information are
displayed.

For details regarding the driving
support functions, refer to the page
for the corresponding function.

The warning messages that have
been displayed since the power
switch was turned to ON mode
can be checked.

When multiple warning messages
have been displayed, the display
can be switched by pressing

or

of the meter control switches.

Warning messages that have been currently cleared and some warning
messages are not displayed. Also, when there are no warning messages
that can be checked, the display indicates that there are no messages.

Driving assist system information

Warning message display

244

3. Instrument cluster

The operation contents of the driving support systems and settings
related to the combination meter display can be changed.

Driving support systems such as the PCS (Pre-Collision System) and Blind
Spot Monitor (if equipped) is turned on and off by simply pressing

.

Make sure not to cancel the systems accidentally.

■

Setting procedure

Press

or

of the meter control switches on the steering

wheel and select

.

Press

or

of the meter control switches and select the

item to change, and then press

.

If the function is turned on and
off or the sensitivity, etc. is
changed on the setting screen,
the setting is changed each time
the

is pressed.

For functions that allow opera-
tion contents, display contents,
etc., of a function to be selected,
the setting screen is displayed.

When the setting screen is displayed, select the setting or
desired value (time, etc.) with the meter control switches.

*

1, 2

For selectable operation con-
tents and setting values, select
the desired setting or value, and
then press

.

To stop the selection, press

.

When the setting check screen
is displayed, select proceed or
cancel and press

.

*

1

: Depending on the items, a subsequent setting screen may be displayed

after selecting an item.

*

2

: For items which set the adjustment level or time, after the item is set,

the setting screen remains displayed until

is pressed.

Settings display

1

2

3

245

3. Instrument cluster

3

Instrument clus

ter

■

Settings table

Item

Settings

Setting result

“On”

Turns the LDA system steering control
function on and off. (

P. 402)

“Off”

“High”

Switches the LDA system lane deviation
sensitivity. (

P. 402)

“Standard”

“On”

Turns the PCS (Pre-Collision System) on
and off. (

P. 385)

“Off”

Far

Switches the PCS (Pre-Collision System)
warning timing. (

P. 385)

Middle

Near

*

“On”

Turns the Intuitive parking assist on and off.
(

P. 433)

“Off”

*

“On”

Turns the Parking Support Brake function
on and off. (

P. 444)

“Off”

*

“On”

Turns the Blind Spot Monitor on and off.
(

P. 422)

“Off”

“On”

Turns the LDA system vehicle sway warn-
ing on and off. (

P. 402)

“Off”

“High”

Switches the LDA system vehicle sway
warning sensitivity. (

P. 402)

“Standard”

“Low”

246

3. Instrument cluster

*

: If equipped

■

“Meter Customize” settings (

)

*

Height

Changes the display position and bright-
ness of the head-up display. (

P. 254)

Brightness

“km/h”

Switches the speed unit used by the screen
display.

“MPH”

“Meter Customize” settings:

P. 246

“Vehicle Settings” settings:

P. 741

Item

Settings

Setting result

Item

Settings

Setting result

“Simple/Split
Screen”

“Simple”

Switches the display mode of
the main display. (

P. 213)

“Split”

“Screen
OFF”

*

1

“Yes”

Turns the multi-information dis-
play off.

“No”

“HV System
Indicator”
(

P. 223)

“ECO Acceler-
ator Guidance”

“On”

Turns the “ECO Accelerator
Guidance” on and off.

“Off”

“EV Indicator
Light On/Off”

“On”

Turns the EV indicator on and
off.

“Off”

“EV Drive
Monitor”

“EV
Energy”

Switches the information dis-
play in the left upper corner of
the Hybrid System Indicator.
(

P. 228)

“EV
Dis-
tance”

“Blank”

247

3. Instrument cluster

3

Instrument clus

ter

“Pop-up Display
On/Off”

“Navigation”

*

2

“On”

Turns the pop-up display of the
selected item on the multi-
information display on and off.

“Off”

“Instrument
Panel Light”

“On”

“Off”

“Climate
Settings”

“On”

“Off”

“Cruise
Control
Operation
Display”

“On”

“Off”

“HUD
Settings”

*

2

“On”

“Off”

“Driving Mode
Select”

“On”

“Off”

“Multimedia
Menu”

*

2

“On”

“Off”

“Traction
Battery
Cooler”

“On”

“Off”

“Speed
Limit”

*

2, 3

(

P. 256)

“Off”

Switches the operation con-
tents of the speed limit func-
tion.

“Only Display”

“With Caution”

“Language”

“English” (English)

Switches the language dis-
played on the screen.

“Français” (French)

“Español” (Spanish)

“Calendar”

Month/Day/Year

*

4

Changes the date used for the
electricity and fuel consump-
tion record and the charging
timer function.

Day/Month/Year

*

5

Item

Settings

Setting result