Toyota Corolla Hybrid (2022 year). Manual in english — page 6
96
2-1. Instrument cluster
■
Locations of gauges and meters
Analog speedometer
The units of measure may differ depending on the intended destination of
the vehicle.
Tachometer
Displays the engine speed in revolutions per minute
Speedometer
Clock (
P.99)
Fuel gauge
Displays the quantity of fuel remaining in the tank
Engine coolant temperature gauge
Displays the engine coolant temperature
Display change button (
Odometer and trip meter display (
Multi-information display
Presents the driver with a variety of vehicle data (
Displays warning messages if a malfunction occurs (
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F
(50°C)
Gauges and meters
Meter display
97
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
Shift position indicator (
Digital speedometer
The units of measure may differ depending on the intended destination of
the vehicle.
Tachometer
Displays the engine speed in revolutions per minute
Speedometer
Clock (
P.99)
Fuel gauge
Displays the quantity of fuel remaining in the tank
Engine coolant temperature gauge
Displays the engine coolant temperature
Display change button (
Odometer and trip meter display (
Multi-information display
Presents the driver with a variety of vehicle data (
Displays warning messages if a malfunction occurs (
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F
(50°C)
Shift position indicator (
■
Engine speed
On hybrid vehicles, engine speed is
precisely controlled in order to help
improve fuel efficiency and reduce
exhaust emissions etc.
There are times when the engine
98
2-1. Instrument cluster
speed that is displayed may differ
even when vehicle operation and
driving conditions are the same.
■
Outside temperature display
●
In the following situations, the cor-
rect outside temperature may not
be displayed, or the display may
take longer than normal to
change:
• When stopped, or driving at low
speeds (less than 16 mph [25
km/h])
• When the outside temperature
has changed suddenly (at the
entrance/exit of a garage, tunnel,
etc.)
●
When “--” or “E” is displayed, the
system may be malfunctioning.
Take your vehicle to your Toyota
dealer.
■
Liquid crystal display
■
Customization
The gauges and meters can be cus-
tomized in
of the multi-informa-
tion display. (
■
Changing the display
Press the display change button
until the desired item is dis-
played.
■
Display items
Odometer
Displays the total distance the vehi-
cle has been driven.
Trip meter A/Trip meter B
Displays the distance the vehicle
has been driven since the meter
was last reset. Trip meters A and B
can be used to record and display
WARNING
■
The information display at
low temperatures
Allow the interior of the vehicle to
warm up before using the liquid
crystal information display. At
extremely low temperatures, the
information display monitor may
respond slowly, and display
changes may be delayed.
For example, there is a lag
between the driver’s shifting and
the new gear number appearing
on the display. This lag could
cause the driver to downshift
again, causing rapid and exces-
sive engine braking and possibly
an accident resulting in death or
injury.
NOTICE
■
To prevent damage to the
engine and its components
●
Do not let the indicator needle
of the tachometer enter the red
zone, which indicates the maxi-
mum engine speed.
●
The engine may be overheating
if the engine coolant tempera-
ture gauge is in the red zone
(H). In this case, immediately
stop the vehicle in a safe place,
and check the engine after it
has cooled completely.
(
Odometer and trip meter
display
99
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
different distances independently.
To reset, display the desired trip
meter and press and hold the dis-
play change button.
The brightness of the instrument
panel lights can be adjusted.
1
Brighter
2
Darker
■
Instrument panel light bright-
ness adjustment
The brightness of the instrument
panel lights can be adjusted sepa-
rately for when the tail lights are on
and off.
■
Clock adjustment
The clocks on the following can
be adjusted on the audio system
screen.
Multi-information display
Audio system screen
■
Setting the clock to be
adjusted automatically by
GPS (Audio [for
U.S.A.]/Audio Plus)
1
Press the “MENU” button.
2
Select “Setup” on the “Menu”
screen.
3
Select “General” on the
“Setup” screen.
4
Select “Clock”.
5
Select “Auto Adjust by GPS”
to set to on.
■
Adjusting the clock manu-
ally
Audio (except for U.S.A.)
1
Press the “MENU” button.
2
Select “Setup” on the “Menu”
screen.
3
Select “General” on the
“Setup” screen.
4
Select “Clock”.
5
Adjust the displayed time.
Hour: Select “-” or “+” of
“Hours” to adjust the hour.
Minute: Select “-” or “+” of
“Minutes” to adjust the min-
ute.
“:00”: Select to set the clock to
the beginning of the nearest
hour.
e.g.
1:00 to 1:29
1:00
1:30 to 1:59
2:00
Audio (for U.S.A.)/Audio Plus
1
Press the “MENU” button.
Changing the instrument
panel light brightness
Adjusting the clock
100
2-1. Instrument cluster
2
Select “Setup” on the “Menu”
screen.
3
Select “General” on the
“Setup” screen.
4
Select “Clock”.
5
Select “Auto Adjust by GPS”
to set to off.
6
Adjust the displayed time.
Hour: Select “-” or “+” of
“Hours” to adjust the hour.
Minute: Select “-” or “+” of
“Minutes” to adjust the min-
ute.
“:00”: Select to set the clock to
the beginning of the nearest
hour.
e.g.
1:00 to 1:29
1:00
1:30 to 1:59
2:00
■
Setting the time zone
(Audio [for U.S.A.]/Audio
Plus)
1
Press the “MENU” button.
2
Select “Setup” on the “Menu”
screen.
3
Select “General” on the
“Setup” screen.
4
Select “Clock”.
5
Select “Time Zone”.
Select the desired time zone.
■
Setting daylight saving time
(Audio [for U.S.A.]/Audio
Plus)
1
Press the “MENU” button.
2
Select “Setup” on the “Menu”
screen.
3
Select “General” on the
“Setup” screen.
4
Select “Clock”.
5
Select “Daylight Saving
Time” then on/off.
■
Changing the clock
between 12-hour/24-hour
format
1
Press the “MENU” button.
2
Select “Setup” on the “Menu”
screen.
3
Select “General” on the
“Setup” screen.
4
Select “Clock”.
5
Select “24-Hour Time For-
mat” and then on/off.
When set to off, the clock is dis-
played in 12 hour time format.
■
Clock settings screen (Audio
[for U.S.A.]/Audio Plus)
If “Clock : 00” is displayed when
is selected on the multi-information
display, the system may be malfunc-
tioning. Have the vehicle inspected
by your Toyota dealer.
101
2-1. Instrument cluster
2
Vehicle
s
ta
tu
s information an
d in
dicat
or
s
■
Display
Driving support system status
display area
Displays an image when the follow-
ing systems are operating and a
menu icon other than
is
selected:
• LTA (Lane Tracing Assist)
• Dynamic radar cruise control with
full-speed range
• RSA (Road Sign Assist) (if
equipped) (
Content display area
By selecting menu icons on the
multi-information display, a variety
of driving-related information can
be displayed. The multi-information
display can also be used to change
display settings and other vehicle
settings.
Warning or advice pop-up displays
are also displayed in certain situa-
tions.
■
Menu icons
The menu icons will be dis-
played by pressing the
or
meter control switch.
■
Liquid crystal display
Small spots or light spots may
appear on the display. This phenom-
enon is characteristic of liquid crys-
tal displays, and there is no problem
continuing to use the display.
The multi-information display is
operated using the meter control
Multi-information dis-
play
Display and menu icons
Driving information display
(
Driving support system
information display
(
Audio system-linked dis-
play (
Vehicle information dis-
play (
Settings display (
Warning message display
(
WARNING
■
Caution for use while driving
●
When operating the multi-infor-
mation display while driving,
pay extra attention to the safety
of the area around the vehicle.
●
Do not look continuously at the
multi-information display while
driving as you may fail to see
pedestrians, objects on the
road, etc. ahead of the vehicle.
■
The information display at
low temperatures
Changing the meter dis-
play
102
2-1. Instrument cluster
switches.
/
: Select menu icons
/
: Change displayed
content, scroll up/down the
screen and move the cursor
up/down
Press: Enter/Set
Press and hold: Reset/Dis-
play customizable items
Return to the previous screen
Call sending/receiving and
history display
Linked with the hands-free system,
sending or receiving call is dis-
played. For details regarding the
hands-free system, refer to the
“NAVIGATION AND MULTIMEDIA
SYSTEM OWNER’S MANUAL”.
■
Display items
Fuel economy
Hybrid System Indicator/ECO
Accelerator Guidance/Eco
score
■
Fuel economy
Use the displayed values as a ref-
erence only.
Average fuel economy (after
reset)
To reset the average fuel economy
display, press and hold the
meter control switch.
Current fuel consumption
Displays instantaneous current fuel
consumption.
Driving range
Displays driving range with remain-
ing fuel.
This distance is computed based
on your average fuel consumption.
As a result, the actual distance that
can be driven may differ from that
displayed.
When only a small amount of fuel is
added to the tank, the display may
not be updated.
When refueling, turn the power
switch off. If the vehicle is refueled
without turning the power switch off,
the display may not be updated.
The average fuel economy dis-
play can be changed in
.
(
Average fuel economy (after
start)
Displays the average fuel con-
Content of driving infor-
mation
103
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
sumption since hybrid system start.
Average fuel economy (after
refuel)
Displays the average fuel con-
sumption since the vehicle was
refueled.
■
Hybrid System Indica-
tor/ECO Accelerator Guid-
ance/Eco score
EV indicator (
Hybrid System Indicator/ECO
Accelerator Guidance
Eco score
Hybrid System Indicator
Displays hybrid system output or
regeneration level.
Charge area
Shows regeneration
*
status.
Regenerated energy will be used to
charge the hybrid battery (traction
battery).
Hybrid Eco area
Shows that gasoline engine power
is not being used very often.
The gasoline engine will automati-
cally stop and restart under various
conditions.
Eco area
Shows that the vehicle is being
driven in an Eco-friendly manner.
By keeping the bar display within
Eco area, more Eco-friendly driv-
ing can be achieved.
Power area
Shows that an Eco-friendly driving
range is being exceeded (during full
power driving etc.)
*
: When used in this manual, regen-
eration refers to the conversion of
energy created by the movement
of the vehicle into electrical
energy.
ECO Accelerator Guidance
Eco area
Indicates that the vehicle is being
driven in an Eco-friendly manner.
Zone of Eco acceleration
Displayed as a blue bar, and rep-
resents an estimated suitable
accelerator pedal operation range
for the current driving conditions,
such as starting off or cruising.
104
2-1. Instrument cluster
This display changes according to
situation, such as when starting off
or cruising.
Current accelerator pedal
operation
Displayed as a green bar when
within the Eco area.
Eco-friendly acceleration can be
achieved by keeping the accelera-
tor pedal operation display within
the range indicated by the blue bar.
(
Eco score
The following 3 Eco driving meth-
ods are evaluated in 5 levels:
Smooth start-off acceleration, driv-
ing without sudden acceleration,
and smooth stopping. When the
vehicle is stopped, an Eco score
out of 100 points will be displayed.
Eco start status
Eco cruise status
Eco stop status
Score result
How to read the bar display
Not yet evaluated
Low
High
• After the hybrid system is started,
the Eco score will not be dis-
played until the vehicle speed
exceeds approximately 12 mph
(20 km/h).
• The Eco score will be reset each
time the hybrid system is started.
• When the hybrid system is
stopped, the total score of the
current trip will be displayed.
■
Hybrid System Indicator is dis-
played when
The Hybrid System Indicator is dis-
played in the following situations:
●
The “READY” indicator is illumi-
nated.
●
The shift lever is in D or B.
■
The ECO Accelerator Guid-
ance/Eco score will not operate
when
The ECO Accelerator Guidance/Eco
score will not operate in the follow-
ing situations:
●
The Hybrid System Indicator is not
operating.
●
The vehicle is being driven using
the dynamic radar cruise control
with full-speed range.
105
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
■
Driving support system
information
Select to display the operational
status of the following systems:
LTA (Lane Tracing Assist)
(
Dynamic radar cruise control
with full-speed range
(
Select to enable selection of an
audio source or track on the
meter using the meter control
switches.
This menu icon can be set to be
displayed/not displayed in
.
■
Display items
Drive information
Energy monitor (
■
Drive information
Displays drive information such as
the following:
Drive information type
Drive information items
Displays the following depend-
ing on which drive information
type and drive information items
were selected in
. (
After start
• Distance: Displays the distance
driven since hybrid system start
• Elapsed time: Displays the
elapsed time since hybrid system
start
• Average vehicle speed: Displays
the average vehicle speed since
hybrid system start
After reset
• Distance: Displays the distance
driven since the display was
reset
*
• Elapsed time: Displays the
elapsed time since the display
was reset
*
• Average vehicle speed: Displays
the average vehicle speed since
the display was reset
*
*
: To reset, display the desired item
and press and hold the
meter control switch.
Driving support system
information display
Audio system-linked dis-
play
Vehicle information dis-
play
106
2-1. Instrument cluster
■
Meter display settings that
can be changed
Language
Select to change the language dis-
played.
Units
Select to change the units of mea-
sure displayed.
Speedometer display (7-inch
display)
Select to set the display of the
speedometer to analog/digital.
EV indicator
Select to enable/disable the EV
indicator.
Select to change the displayed con-
tent of the following:
• Hybrid system indicator
Select to display/not display the
Eco Accelerator Guidance.
(
• Fuel economy display
Select to change the average fuel
consumption display between after
start/after reset. (
Select to display/not display the
audio system linked display.
Select to change the displayed con-
tent of the following:
• Display contents
Select to display/not display the
energy monitor. (
• Drive information type
Select to change the drive informa-
tion type display between after
start/after reset.
• Drive information items
Select to set the first and second
items of the drive information dis-
play to any of the following: aver-
age vehicle
speed/distance/elapsed time.
Current trip result display
Select to change the displayed
information about the current trip,
measured from when the hybrid
system was started until it was
stopped, between drive informa-
tion/eco score. (The information will
be displayed temporarily when the
hybrid system is stopped.)
Pop-up display
Select to enable/disable pop-up
displays for each relevant system.
Multi-information display off
Select to turn the multi-information
display off.
To turn the multi-information display
on again, press any of the following
meter control switches
/
/
/
/
/
.
Default setting
Select to reset the meter display
settings to the default setting.
■
Vehicle functions and set-
tings that can be changed
Settings display
107
2-1. Instrument cluster
2
Vehicle
s
ta
tu
s information an
d in
dicat
or
s
■
Suspension of the settings dis-
play
●
Some settings cannot be changed
while driving. When changing set-
tings, park the vehicle in a safe
place.
●
If a warning message is displayed,
operation of the settings display
will be suspended.
Audio system screen
Multi-information display
Meter control switches
(
The energy monitor can be used
to check the vehicle drive sta-
tus,hybrid system operation sta-
tusand energy regeneration
status.
WARNING
■
Cautions during setting up
the display
If the hybrid system is operating
while changing certain settings on
the settings display, ensure that
the vehicle is parked in a place
with adequate ventilation. In a
closed area such as a garage,
exhaust gases including harmful
carbon monoxide (CO) may col-
lect and enter the vehicle. This
may lead to death or a serious
health hazard.
NOTICE
■
During setting up the display
To prevent 12-volt battery dis-
charge, ensure that the hybrid
system is operating while setting
up the display features.
Energy monitor/con-
sumption screen
You can view the status of
your hybrid system on the
multi-information display
and the audio system
screen.
The energy monitor and fuel
consumption screen can be
displayed on the “Home”
screen of the audio system
screen.
System components
Energy monitor
108
2-1. Instrument cluster
■
Display procedure
Multi-information display
Press the meter control
switches on the steering wheel
several times to select the
energy monitor display.
Audio system screen (Audio
without DCM/Audio Plus with-
out DCM)
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
If a screen other than “Energy mon-
itor” is displayed, select “Energy”.
Audio system screen (Audio
with DCM/Audio Plus with
DCM)
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
3
Select “ECO” on the “Infor-
mation” screen.
If a screen other than “Energy mon-
itor” is displayed, select “Energy”.
■
Reading the display
The arrows will appear in accor-
dance with the energy flow.
When there is no energy flow,
arrows will not be displayed.
The color of the arrows will change
as follows
Green: When the hybrid battery
(traction battery) is regenerated or
charged.
Yellow: When the hybrid battery
(traction battery) is in use.
Red: When the gasoline engine is
in use.
The image shows all the arrows
as an example. The actual dis-
play will vary depending on con-
ditions.
Multi-information display
Gasoline engine
Hybrid battery (traction bat-
tery)
Tires
Audio system screen (except
when charging)
Gasoline engine
Electric motor (traction
motor)
Hybrid battery (traction bat-
tery)
Tires
109
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
Audio system screen (when
charging)
Gasoline engine
Electric motor (traction
motor)
Hybrid battery (traction bat-
tery)
Audio system screen (“Home”
screen)
Gasoline engine
Hybrid battery (traction bat-
tery)
Tires
■
Color of the hybrid battery
(traction battery) on the display
It will be green when the hybrid bat-
tery (traction battery) is being
charged, and yellow when the
hybrid battery (traction battery) is
being used.
■
Remaining charge amount
warning of hybrid battery (trac-
tion battery)
●
The buzzer sounds intermittently
when the hybrid battery (traction
battery) remains without charging
while the shift lever is in N, or the
remaining charge amount drops
below a certain level. If the
remaining charge amount drops
further, the buzzer sounds contin-
uously.
●
When a warning message is
shown on the multi-information
display and the buzzer sounds,
follow the instructions displayed
on the screen to perform trouble
shooting.
■
Color of the gasoline engine on
the audio system screen
It will be blue when the engine is
warming up, and it will turn to red
when the warming up is finished.
■
Hybrid battery (traction bat-
tery) status
Multi-information display
Low
High
110
2-1. Instrument cluster
Audio system screen
Low
High
These images are examples only,
and may vary slightly from actual
conditions.
■
Trip information
Audio without DCM/Audio
Plus without DCM
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
If a screen other than “Trip Informa-
tion” is displayed, select “Trip Infor-
mation”.
Audio with DCM/Audio Plus
with DCM
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
3
Select “ECO” on the “Infor-
mation” screen.
If a screen other than “Trip Informa-
tion” is displayed, select “Trip Infor-
mation”.
Resetting the consumption
data
Fuel consumption in the past
15 minutes
Current fuel consumption
Regenerated energy in the
past 15 minutes
One symbol indicates 30 Wh. Up to
5 symbols are shown.
Average vehicle speed since
the hybrid system was
started.
Elapsed time since the hybrid
system was started.
Cruising range
Average fuel consumption for
the past 15 minutes is divided
by color into past averages and
averages attained since the
power switch was last turned to
ON. Use the displayed average
fuel consumption as a refer-
ence.
The image is an example only, and
may vary slightly from actual condi-
tions.
Consumption
111
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
■
History
Audio without DCM/Audio
Plus without DCM
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
If a screen other than “History” is
displayed, select “History”.
Audio with DCM/Audio Plus
with DCM
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
3
Select “ECO” on the “Infor-
mation” screen.
If a screen other than “History” is
displayed, select “History”.
Best recorded fuel consump-
tion
Latest fuel consumption
Previous fuel consumption
record
Resetting the history data
Updating the latest fuel con-
sumption data
The average fuel consumption
history is divided by color into
past averages and the average
fuel consumption since the last
updated. Use the displayed
average fuel consumption as a
reference.
The image is an example only, and
may vary slightly from actual condi-
tions.
■
Updating the history data
Update the latest fuel consumption
by selecting “Update” to measure
the current fuel consumption again.
■
Resetting the data
The fuel consumption data can be
deleted by selecting “Clear”.
■
Cruising range
Displays the estimated maximum
distance that can be driven with the
quantity of fuel remaining.
This distance is computed based on
your average fuel consumption.
As a result, the actual distance that
can be driven may differ from that
displayed.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст