Toyota Prius (2021 year). Manual in english — part 2

80

1-3. Emergency assistance

PRIUS_OM_OM47E09U_(U)

■

Enhanced Roadside Assistance

Enhanced Roadside Assistance adds GPS data to the already
included warranty-based Toyota roadside service.
Subscribers can press the “SOS” button to reach a Safety Connect
response-center agent, who can help with a wide range of needs,
such as: towing, flat tire, fuel delivery, etc. For a description of the
Roadside Assistance services and their limitations, please see the
Safety Connect Terms and Conditions, which are available at
Toyota.com in the United States, Toyotapr.com in Puerto Rico and
Toyota.ca in Canada.

Important! Read this information before using Safety Connect.

■

Exposure to radio frequency signals

The Safety Connect system installed in your vehicle is a low-power
radio transmitter and receiver. It receives and also sends out radio
frequency (RF) signals.
In August 1996, the Federal Communications Commission (FCC)
adopted RF exposure guidelines with safety levels for mobile wire-
less phones. Those guidelines are consistent with the safety stan-
dards previously set by the following U.S. and international
standards bodies.

●

ANSI (American National Standards Institute) C95.1 [1992]

●

NCRP (National Council on Radiation Protection and Measure-
ment) Report 86 [1986]

●

ICNIRP (International Commission on Non-Ionizing Radiation
Protection) [1996]

Those standards were based on comprehensive and periodic eval-
uations of the relevant scientific literature. Over 120 scientists, engi-
neers, and physicians from universities, and government health
agencies and industries reviewed the available body of research to
develop the ANSI Standard (C95.1).
The design of Safety Connect complies with the FCC guidelines in
addition to those standards.

Safety information for Safety Connect

81

1-3. Emergency assistance

PRIUS_OM_OM47E09U_(U)

1

Fo
r safety and securi

ty

■

Certifications for the Safety Connect

82

1-3. Emergency assistance

PRIUS_OM_OM47E09U_(U)

83

1-3. Emergency assistance

PRIUS_OM_OM47E09U_(U)

1

Fo
r safety and securi

ty

84

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

Hybrid system features

The illustration is an example for explanation and may differ from the
actual item.

Gasoline engine
Front electric motor (traction motor)
Rear electric motor (traction motor)

*

*

: AWD models only

Your vehicle is a hybrid vehicle. It has characteristics different
from conventional vehicles. Be sure you are closely familiar with
the characteristics of your vehicle, and operate it with care.
The hybrid system combines the use of a gasoline engine and
an electric motor (traction motor) according to driving condi-
tions, improving fuel efficiency and reducing exhaust emis-
sions.

1

2

3

85

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

1

Fo
r safety and securi

ty

◆

When stopped/during start off

The gasoline engine stops

*

when the vehicle is stopped. During

start off, the electric motor (traction motor) drives the vehicle. At
slow speeds or when traveling down a gentle slope, the engine is
stopped

*

and the electric motor (traction motor) is used.

When shift position is in N, the hybrid battery (traction battery) is not
being charged.

*

: When the hybrid battery (traction battery) requires charging or the engine

is warming up, etc., the gasoline engine will not automatically stop.
(



P. 86)

◆

During normal driving

The gasoline engine is predominantly used. The electric motor
(traction motor) charges the hybrid battery (traction battery) as nec-
essary.

◆

When accelerating sharply

When the accelerator pedal is depressed heavily, the power of the
hybrid battery (traction battery) is added to that of the gasoline
engine via the electric motor (traction motor).

◆

When braking (regenerative braking)

The wheels operate the electric motor (traction motor) as a power
generator, and the hybrid battery (traction battery) is charged.

When driving with the gasoline engine stopped, a sound, which
changes in accordance with the driving speed, will be played in order
to warn people nearby of the vehicle’s approach. The sound will stop
when the vehicle speed exceeds approximately 22 mph (35 km/h).

Vehicle proximity notification system

86

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

■

Regenerative braking

In the following situations, kinetic energy is converted to electric energy and
deceleration force can be obtained in conjunction with the recharging of the
hybrid battery (traction battery).

●

The accelerator pedal is released while driving with the shift position in D or
B.

●

The brake pedal is depressed while driving with the shift position in D or B.

■

Hybrid System Indicator

■

Conditions in which the gasoline engine may not stop

The gasoline engine starts and stops automatically. However, it may not stop
automatically in the following conditions

*

:

●

During gasoline engine warm-up

●

During hybrid battery (traction battery) charging

●

When the temperature of the hybrid battery (traction battery) is high or low

●

When the heater is switched on

*

: Depending on the circumstances, the gasoline engine may also not stop

automatically in situations other than those above.

■

Charging the hybrid battery (traction battery)

As the gasoline engine charges the hybrid battery (traction battery), the bat-
tery does not need to be charged from an outside source. However, if the
vehicle is left parked for a long time the hybrid battery (traction battery) will
slowly discharge. For this reason, be sure to drive the vehicle at least once
every few months for at least 30 minutes or 10 miles (16 km). If the hybrid
battery (traction battery) becomes fully discharged and you are unable to start
the hybrid system, contact your Toyota dealer.

■

Charging the 12-volt battery



P. 652

■

After the 12-volt battery has discharged or when the terminal has been
removed and installed during exchange, etc.

The gasoline engine may not stop even if the vehicle is being driven by the
hybrid battery (traction battery). If this continues for a few days, contact your
Toyota dealer.

Hybrid System Indicator represents the
hybrid system power output and regener-
ative charging. (



P. 129)

87

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

1

Fo
r safety and securi

ty

■

Sounds and vibrations specific to a hybrid vehicle

There may be no engine sound or vibration even though the vehicle is able to
move with the “READY” indicator is illuminated. For safety, apply the parking
brake and make sure to shift the shift position to P when parked.
The following sounds or vibrations may occur when the hybrid system is
operating and are not a malfunction:

●

Motor sounds may be heard from the engine compartment.

●

Sounds may be heard from the hybrid battery (traction battery) under the
rear seats when the hybrid system starts or stops.

●

Relay operating sounds such as a snap or soft clank will be emitted from the
hybrid battery (traction battery), under the rear seats, when the hybrid sys-
tem is started or stopped.

●

Sounds from the hybrid system may be heard when the back door is open.

●

Sounds may be heard from the transmission when the gasoline engine
starts or stops, when driving at low speeds, or during idling.

●

Engine sounds may be heard when accelerating sharply.

●

Sounds may be heard due to regenerative braking when the brake pedal is
depressed or as the accelerator pedal is released.

●

Vibration may be felt when the gasoline engine starts or stops.

●

Cooling fan sounds may be heard from the air intake vent. (



P. 89)

■

Vehicle proximity notification system

In the following cases, the vehicle proximity notification system may be diffi-
cult for surrounding people to hear.

●

In very noisy areas

●

In the wind or the rain

Also, as the vehicle proximity notification system is installed on the front of
the vehicle, it may be more difficult to hear from the rear of the vehicle com-
pared to the front.

■

When “Proximity Notification System Malfunction Visit Your Dealer” is
displayed on the multi-information display

The vehicle proximity notification system may be malfunctioning. Have the
vehicle inspected by your Toyota dealer immediately.

■

Maintenance, repair, recycling, and disposal

Contact your Toyota dealer regarding maintenance, repair, recycling and dis-
posal. Do not dispose of the vehicle yourself.

88

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

Hybrid system precautions

The illustration is an example for explanation and may differ from the
actual item.

Take care when handling the hybrid system, as it is a high volt-
age system (about 600 V at maximum) as well as contains parts
that become extremely hot when the hybrid system is operating.
Obey the warning labels attached to the vehicle.

Warning label
Service plug
Rear inverter (traction motor)

*

Rear electric motor (traction
motor)

*

Hybrid battery (traction battery)

High voltage cables (orange)
Front electric motor (traction
motor)
Power control unit
Air conditioning compressor

*

: AWD models only

1

2

3

4

5

6

7

8

9

89

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

1

Fo
r safety and securi

ty

There is an air intake vent under
the right side of the rear seat for
the purpose of cooling the hybrid
battery (traction battery). If the
vent is blocked, charging/dis-
charging of the hybrid battery
(traction battery) may become lim-
ited.

When a certain level of impact is detected by the impact sensor, the
emergency shut off system blocks the high voltage current and stops
the fuel pump to minimize the risk of electrocution and fuel leakage. If
the emergency shut off system activates, your vehicle will not restart.
To restart the hybrid system, contact your Toyota dealer.

A message is automatically displayed when a malfunction occurs in
the hybrid system or an improper operation is attempted.
If a warning message is shown on
the multi-information display, read
the message and follow the
instructions.

Hybrid battery (traction battery) air intake vent

Emergency shut off system

Hybrid warning message

90

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

■

If a warning light comes on, a warning message is displayed, or the
12-volt battery is disconnected

The hybrid system may not start. In this case, try to start the system again. If
the “READY” indicator does not come on, contact your Toyota dealer.

■

Running out of fuel

When the vehicle has run out of fuel and the hybrid system cannot be started,
refuel the vehicle with at least enough gasoline to make the low fuel level
warning light (



P. 594) go off. If there is only a small amount of fuel, the

hybrid system may not be able to start. (The standard amount of fuel is about
2.0 gal. [7.5 L, 1.7 Imp.gal.], when the vehicle is on a level surface. This value
may vary when the vehicle is on a slope. Add extra fuel when the vehicle is
inclined.)

■

Electromagnetic waves

●

High voltage parts and cables on hybrid vehicles incorporate electromag-
netic shielding, and therefore emit approximately the same amount of elec-
tromagnetic waves as conventional gasoline powered vehicles or home
electronic appliances.

●

Your vehicle may cause sound interference in some third party-produced
radio parts.

■

Hybrid battery (traction battery)

The hybrid battery (traction battery) has a limited service life. The lifespan of
the hybrid battery (traction battery) can change in accordance with driving
style and driving conditions.

■

Starting the hybrid system in an extremely cold environment

When the hybrid battery (traction battery) is extremely cold (below approxi-
mately -22°F [-30°C]) under the influence of the outside temperature, it may
not be possible to start the hybrid system. In this case, try to start the hybrid
system again after the temperature of the hybrid battery increases due to the
outside temperature increase etc.

91

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

1

Fo
r safety and securi

ty

WARNING

■

High voltage precautions

This vehicle has high voltage DC and AC systems as well as a 12-volt sys-
tem. DC and AC high voltage is very dangerous and can cause severe
burns and electric shock that may result in death or serious injury.

●

Never touch, disassemble, remove or replace the high voltage parts,
cables or their connectors.

●

The hybrid system will become hot after starting as the system uses high
voltage. Be careful of both the high voltage and the high temperature, and
always obey the warning labels attached to the vehicle.

●

Never try to open the service plug
access hole located under the right side
of the rear seat. The service plug is
used only when the vehicle is serviced
and is subject to high voltage.

92

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

WARNING

■

Road accident cautions

Observe the following precautions to reduce the risk of death or serious
injury:

●

Pull your vehicle off the road, apply the parking brake, shift the shift posi-
tion to P, and turn the hybrid system off.

●

Do not touch the high voltage parts, cables and connectors.

●

If electric wires are exposed inside or outside your vehicle, an electric
shock may occur. Never touch exposed electric wires.

●

If a fire occurs in the hybrid vehicle, leave the vehicle as soon as possible.
Never use a fire extinguisher that is not meant for electric fires. Using even
a small amount of water may be dangerous.

●

If your vehicle needs to be towed, do so with front wheels (2WD models)
or four wheels (AWD models) raised. If the wheels connected to the elec-
tric motor (traction motor) are on the ground when towing, the motor may
continue to generate electricity. This may cause a fire. (



P. 584)

●

Carefully inspect the ground under the vehicle. If you find that liquid has
leaked onto the ground, the fuel system may have been damaged. Leave
the vehicle as soon as possible.



AWD models

●

If a fluid leak occurs, do not touch the fluid as it may be strong alkaline
electrolyte from the hybrid battery (traction battery). If it comes into contact
with your skin or eyes, wash it off immediately with a large amount of water
or, if possible, boric acid solution. Seek immediate medical attention.



2WD models

●

Do not touch the battery if liquid is leaking from or adhering to it.
If electrolyte (carbonic-based organic electrolyte) from the hybrid battery
(traction battery) comes into contact with the eyes or skin, it could cause
blindness or skin wounds. In the unlikely event that it comes into contact
with the eyes or skin, wash it off immediately with a large amount of water,
and seek immediate medical attention.

●

If electrolyte is leaking from the hybrid battery (traction battery), do not
approach the vehicle.
Even in the unlikely event that the hybrid battery (traction battery) is dam-
aged, the internal construction of the battery will prevent a large amount of
electrolyte from leaking out. However, any electrolyte that does leak out
will give off a vapor. This vapor is an irritant to skin and eyes and could
cause acute poisoning if inhaled.

●

Do not bring burning or high-temperature items close to the electrolyte.
The electrolyte may ignite and cause a fire.

93

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

1

Fo
r safety and securi

ty

WARNING

■

Hybrid battery (traction battery)

●

2WD models: Your vehicle contains a sealed lithium-ion battery.

●

Never resell, hand over or modify the hybrid battery. To prevent accidents,
hybrid batteries that have been removed from a disposed vehicle are col-
lected through Toyota dealer. Do not dispose of the battery yourself.
Unless the battery is properly collected, the following may occur, resulting
in death or serious injury:
• The hybrid battery may be illegally disposed of or dumped, and it is haz-

ardous to the environment or someone may touch a high voltage part,
resulting in an electric shock.

• The hybrid battery is intended to be used exclusively with your hybrid

vehicle. If the hybrid battery is used outside of your vehicle or modified
in any way, accidents such as electric shock, heat generation, smoke
generation, an explosion and electrolyte leakage may occur.

When reselling or handing over your vehicle, the possibility of an accident
is extremely high because the person receiving the vehicle may not be
aware of these dangers.

●

If your vehicle is disposed of without the hybrid battery having been
removed, there is a danger of serious electric shock if high voltage parts,
cables and their connectors are touched. In the event that your vehicle
must be disposed of, the hybrid battery must be disposed of by your
Toyota dealer or a qualified service shop. If the hybrid battery is not dis-
posed of properly, it may cause electric shock that can result in death or
serious injury.

94

1-4. Hybrid system

PRIUS_OM_OM47E09U_(U)

NOTICE

■

Hybrid battery (traction battery) air intake vent

●

Make sure not to block the air intake vent with anything, such as a seat
cover, plastic cover, or luggage. If the vent is blocked, the charging/dis-
charging of the hybrid battery (traction battery) may become limited.

●

When dust etc. has accumulated in the air intake vent, clean it with a vac-
uum cleaner to prevent the vent from clogging.

●

Do not get water or foreign materials in the air intake vent as this may
cause a short circuit and damage the hybrid battery (traction battery).

●

Do not carry large amounts of water such as water cooler bottles in the
vehicle. If water spills onto the hybrid battery (traction battery), the battery
may be damaged. Have the vehicle inspected by your Toyota dealer.

●

There is a filter installed to the air intake vent. When the filter remains
noticeably dirty even after cleaning the air intake vent, filter cleaning or
replacement is recommended. For information regarding filter cleaning or
replacement, refer to P. 551.

●

If “Maintenance required for Traction battery cooling parts See owner’s
manual” is shown on the multi-information display, the air intake vent and
filter may be clogged. Refer to P. 551 for information on how to clean the
air intake vent.

95

1-5. Theft deterrent system

PRIUS_OM_OM47E09U_(U)

1

Fo
r safety and securi

ty

Immobilizer system

The indicator light flashes after
the power switch has been turned
off to indicate that the system is
operating.
The indicator light stops flashing
after the power switch has been
turned to ACCESSORY or ON
mode to indicate that the system
has been canceled.

■

System maintenance

The vehicle has a maintenance-free type immobilizer system.

■

Conditions that may cause the system to malfunction

●

If the grip portion of the key is in contact with a metallic object

●

If the key is in close proximity to or touching a key registered to the security
system (key with a built-in transponder chip) of another vehicle

The vehicle’s keys have built-in transponder chips that prevent
the hybrid system from starting if a key has not been previously
registered in the vehicle’s on-board computer.
Never leave the keys inside the vehicle when you leave the vehi-
cle.

This system is designed to help prevent vehicle theft but does not
guarantee absolute security against all vehicle thefts.

96

1-5. Theft deterrent system

PRIUS_OM_OM47E09U_(U)

■

Certifications for the immobilizer system



For vehicles sold in the U.S.A., Hawaii, American Samoa, Guam, Saipan
and Puerto Rico



For vehicles sold in Canada

NOTICE

■

To ensure the system operates correctly

Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.

97

PRIUS_OM_OM47E09U_(U)

Instrument cluster

2

2.

Instrument cluster

Combination meter. . . .. 98
Warning lights and

indicators . . . . . . 107

Main display . . . . . .. 115
Multi-information

display. . . . . . . . 124

Head-up display . . . . 158
Energy monitor/

consumption screen
(vehicles with 7-inch
display) . . . . . . ... 165

Energy monitor/

consumption screen
(vehicles with
11.6-inch display). . . 172

98

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

Combination meter

The units used on the display may differ depending on the target region.

Main display (



P. 115)

The main display shows basic information related to driving, such as the
vehicle speed and remaining fuel amount.

Multi-information display (



P. 124)

The multi-information display shows information which makes the vehicle
convenient-to-use, such as the hybrid system operation condition and fuel
consumption history. Also, the operation contents of the driving support
systems and the combination meter display settings can be changed by
switching to the settings screen.

Warning lights and indicators (



P. 107)

The warning lights and indicators comes on or flashes to indicate problems
with the vehicle or to show the operation status of the vehicle’s systems.

Clock (



P. 103)

The large meter uses 2 liquid crystal displays to display informa-
tion such as the vehicle condition, driving status and fuel con-
sumption.

Combination meter layout

1

2

3

4

PRIUS_OM_OM47E09U_(U)

99

2. Instrument cluster

2

Instru

me
nt clu

ster

The meter control switches equipped on the steering wheel can be
used to switch the screen display and change settings related to func-
tions displayed on the screen.

Each time the button is
pressed, the mileage display
switches among odometer, trip
meters, etc., and the fuel con-
sumption information for each
distance switches as well.
(



P. 119)

Pressing

,

,

or

performs such operations as
scrolling the screen

*

, switching

the contents of the display

*

and

moving the cursor.
This button is used to perform such operations as selecting the cur-
rent item or switching between on and off.
When pressed, the display returns to the previous screen.

*

: On screens where the screen can be scrolled and the display can be

switched, marks are displayed to indicate the direction of operation (such
as

and

).

Operations related to the combination meter

1

2

3

4

100

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

When the switches are pressed, the instrument cluster light changes
as follows.

The instrument cluster brightness levels that can be selected differ
depending on whether the tail lights are on and surrounding brightness lev-
els. (



P. 104)

Darker
Brighter

When the switches are pressed,
the adjustment level check screen
(pop-up display

*

) is displayed on

the main display.
When the instrument cluster light is
adjusted, the brightness of the
instrument

panel

light

also

changes.

*

: A short time after the operation is completed, the pop-up display turns off.

Furthermore, the pop-up display can be turned on and off in the “Meter
Customize” settings. (



P. 153)

Instrument cluster light control

1

2

PRIUS_OM_OM47E09U_(U)

101

2. Instrument cluster

2

Instru

me
nt clu

ster

Some information will be displayed automatically according to power
switch operation, vehicle condition, etc.

■

When starting the hybrid system

When the hybrid system starts,
an opening animation is dis-
played on the 2 displays.

After the animation ends, the
screens switch to the normal
screen.
The opening animation will be
stopped in any of the following
situations.

• When the shift position is changed to other than P
• When the Simple Advanced Parking Guidance System (if equipped)

is turned on

■

After refueling

When the power switch is
turned to ON mode after refuel-
ing, the gasoline price setting
screen* is displayed on the
multi-information display.

After refueling, always set the
gasoline price so that the “Eco
Savings” function (



P. 138) may

operate properly.
Settings related to the “Eco Savings” function can be changed in the
“Meter Customize” settings. (



P. 153)

*

: If the amount of fuel that the vehicle is refueled with is too small, this

screen may not be displayed. (



P. 123)

■

When the driving assist systems are operating

When using driving assist systems such as the dynamic radar
cruise control with full-speed range

*

(



P. 326) and LTA (Lane Trac-

ing Assist)

*

(



P. 307), information related to each system is auto-

matically displayed on the multi-information display depending on
the situation.

For details regarding the displayed information and the contents of the
display, refer to the explanation page of each system.

*

: If equipped

Information automatically displayed

102

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

When there is information to be notified about the vehicle

When a shift position is mistakenly selected or a problem occurs in
a vehicle system, a warning message (or image) is displayed on
the multi-information display.

When a warning message is displayed, follow the instructions displayed
on the display. (



P. 603)

■

When stopping the hybrid system

From the time the hybrid system is started until it is turned off, the
driving time, distance traveled, average fuel consumption and Eco
score (



P. 131, 148) result are displayed on the multi-information

display approximately every 30 seconds.

Driving time since hybrid sys-
tem started
Distance

traveled

since

hybrid system started
Average fuel consumption
after hybrid system started
Eco score result and advice
Score display for each Eco
score item (



P. 131, 148)

1

2

3

4

5

PRIUS_OM_OM47E09U_(U)

103

2. Instrument cluster

2

Instru

me
nt clu

ster

To adjust the time, perform operations on the

screen (



P. 144)

of the multi-information display.

■

Adjusting the time

Press

or

of the meter control switches on the steering

wheel and select

.

Press

or

of the meter control switches and select

.

Press

to display the cursor.

Press

or

of the

meter control switches to
adjust the cursor position,

and then press

or

to

change the setting.

When the 12-hour display is
selected, “12H” is displayed,
and when the 24-hour display is
selected, “24H” is displayed.
When adjusting minutes, operation automatically starts from 00 sec-
onds.
After changing the settings, press

to return to the previous screen.

Clock adjustment

1

2

3

4

104

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

Resetting the minutes display

Press

or

of the meter control switches on the steering

wheel and select

.

Press

or

of the

meter control switches and

select

.

Press

.

The minutes display switches to “00”.

*

*

: e.g. 1:00 to 1:29



1:00

1:30 to 1:59



2:00

■

The meters and display illuminate when

The power switch is in ON mode.

■

Adjusting the instrument cluster brightness (



P. 100)

●

The brightness levels that can be selected differ depending on whether the
tail lights are on and surrounding brightness levels, as shown in the table
below.

*

: 22 levels of the brightness are displayed on the setting screen. However,

the brightness setting will be the brightest when other than 1st level (the
darkest) is selected. If other than 1st or 22nd level is selected, when the
tail lights are turned on in a dark place, the instrument cluster brightness
setting will be the selected level.

●

If the taillights are illuminated in a dark environment, the instrument cluster
light dims. However, when the brightness of the instrument cluster is set to
minimum or maximum (1st or 22nd level of the instrument cluster bright-
ness), even if the taillights are illuminated, the instrument cluster light will
not dim.

1

2

3

The tail lights are off

The tail lights are on

In a bright place

2 levels

*

2 levels

*

In a dark place

22 levels

PRIUS_OM_OM47E09U_(U)

105

2. Instrument cluster

2

Instru

me
nt clu

ster

■

When disconnecting and reconnecting 12-volt battery terminals

The settings of the clock will be reset.

■

Calendar settings

●

Until the calendar settings are set, the check screen is displayed every time
the power switch is turned to ON mode.

●

After the calendar information is set, it can be changed in the “Meter Cus-
tomize” settings. (



P. 153)

■

When the menu screen on the navigation system is operated (vehicles
with 11.6-inch display)

■

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.

■

Pop-up display

Some functions, such as the driving mode select switch and air conditioning
system, are operation-linked and display pop-up screens on the multi-infor-
mation display. If the pop-up screens of these functions are not desired, they
can be turned off in the “Meter Customize” settings. (



P. 153)

If calendar recording is interrupted due to
replacement of the 12-volt battery or 12-
volt battery discharge, etc., when the
power switch is turned to ON mode after
maintenance, the calendar settings check
screen is automatically displayed on the
multi-information display.

●

If date information is not set, the fuel
consumption record cannot be stored
correctly. When the calendar settings
check screen is displayed, make sure to
always set the settings. (



P. 151)

A pop-up display of the menu screen icon
is displayed on the multi-information dis-
play.

*

*

: The pop-up display on the navigation

system can be turned off in the “Meter
Customize” settings. (



P. 153)

106

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

WARNING

■

To prevent an accident

■

Caution for use while driving

For safety, avoid operating the meter control switch while driving as much
as possible, and do not look continuously at the multi-information display
while driving. Stop the vehicle and operate the meter control switch. Failure
to do so may cause a steering wheel operation error, resulting in an unex-
pected accident.

NOTICE

■

The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.

Do not place anything or attach a sticker
in front of the instrument cluster. The item
may obscure or obstruct the display, or
could reflect off the display, possibly
causing an accident.

107

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

2

Instru

me
nt clu

ster

Warning lights and indicators

The warning lights and indicators inform the driver of the status
of the vehicle’s various systems.
For the purpose of explanation, the following illustration dis-
plays all indicators and warning lights illuminated.

108

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.

Warning lights

Warning lights

Pages

*

1

Brake system warning light (U.S.A.)

P. 592

*

1

Brake system warning light (Canada)
(Red)

P. 592

*

1

Brake system warning light
(Yellow)

P. 592

*

1

Charging system warning light

P. 592

*

1

Low engine oil pressure warning light

P. 592

*

1

Malfunction indicator lamp (U.S.A.)

P. 592

*

1

Malfunction indicator lamp (Canada)

P. 592

*

1

SRS warning light

P. 593

*

1

ABS warning light (U.S.A.)

P. 593

*

1

ABS warning light (Canada)

P. 593

*

1

Electric power steering system warning light
(Red/yellow)

P. 593

*

1,2

PCS warning light (if equipped)

P. 593

LTA indicator (Orange) (if equipped)

P. 593

*

1

Slip indicator light

P. 594

PRIUS_OM_OM47E09U_(U)

109

2. Instrument cluster

2

Instru

me
nt clu

ster

*

1

: These lights turn on when the power switch is turned to ON mode to indi-

cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or turn off. Have the vehicle
inspected by your Toyota dealer.

*

2

: The light flashes or illuminates to indicate a malfunction.

*

3

: The light flashes to indicate a malfunction.

*

1

High coolant temperature warning light

P. 594

*

1, 3

PKSB OFF indicator (if equipped)

P. 594

Open door warning light

P. 594

Low fuel level warning light

P. 594

Driver’s and front passenger’s seat belt
reminder light

P. 595

Rear passengers’ seat belt reminder light
(U.S.A.)

P. 595

Rear passengers’ seat belt reminder light
(Canada)

P. 595

*

1

Master warning light

P. 595

*

1

Tire pressure warning light

P. 595

Warning lights

Pages

110

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

The indicators inform the driver of the operating state of the vehicle’s
various systems.

Indicators

Indicators

Pages

Turn signal indicator

P. 261

Headlight indicator (U.S.A.)

P. 263

Tail light indicator (Canada)

P. 265

Parking brake indicator (U.S.A.)

P. 262

Parking brake indicator (Canada)

P. 262

Headlight high beam indicator

P. 265

Fog light indicator (if equipped)

P. 273

Security indicator

P. 95

“READY” indicator

P. 245

Shift position indicators

P. 255

*

1, 2

Slip indicator light

P. 421

*

1, 3

VSC OFF indicator

P. 422

Cruise control indicator

P. 337,

342

PRIUS_OM_OM47E09U_(U)

111

2. Instrument cluster

2

Instru

me
nt clu

ster

Dynamic radar cruise control indicator (if
equipped)

P. 326

Cruise control “SET” indicator

P. 326,

342

AFS OFF indicator (if equipped)

P. 265,

595

*

1, 3

PCS warning light (if equipped)

P. 300

*

4

LTA indicator (if equipped)

P. 316

Steering control indicator (if equipped)

P. 316

Automatic High Beam indicator (if equipped)

P. 268

Heated steering wheel indicator (if equipped)

P. 457

“BSM” indicator (if equipped)

P. 349

Intuitive parking assist indicator (if equipped)

P. 362

*

1, 3

PKSB OFF indicator (if equipped)

P. 375

*

1

S-APGS indicator (if equipped)

P. 390

*

1

“AIR BAG ON/OFF” indicator (U.S.A.)

P. 49

*

1

“AIR BAG ON/OFF” indicator (Canada)

P. 49

Indicators

Pages

112

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

*

1

: These lights turn on when the power switch is turned to ON mode to indi-

cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or turn off. Have the vehicle
inspected by your Toyota dealer.

*

2

: The light flashes to indicate that the system is operating.

*

3

: The light comes on when the system is turned off.

*

4

: Depending on the operating condition, the color and illuminating/flashing

state of the light change.

PRIUS_OM_OM47E09U_(U)

113

2. Instrument cluster

2

Instru

me
nt clu

ster

■

Main display and multi-information display

*

: The displayed indicator changes according to the current driving mode.

■

Multi-information display (symbol display

*

)

*

: These symbols are displayed along with a message. Also, the symbol dis-

plays listed here are only an example, and different symbols may be dis-
played according to the contents of the multi-information display.

Indicators and symbols displayed on the display

Indicators

Pages

EV drive mode indicator

P. 252

*

“ECO MODE” indicator

P. 347

*

“PWR MODE” indicator

P. 347

EV Indicator

P. 130

Symbol display

Pages

Smart key system

P. 245

Brake Override System/Drive-Start
Control/
Parking Support Brake function (if
equipped)

P. 596

LTA (Lane Tracing Assist) (if equipped)

P. 320

P. 320

Low engine oil pressure warning
(Canada only)

P. 596

114

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

BSM (Blind Spot Monitor) outside rear view mirror indicators
(if equipped) (



P. 349)

• When the BSM function is enabled on the

screen of the multi-infor-

mation display, the power switch is turned to ON mode.

If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Toyota dealer.

●

Indicators are also displayed on the out-
side rear view mirrors.

●

In order to confirm operation, the BSM
outside rear view mirror indicators illumi-
nate in the following situations:
• When the power switch is in ON

mode, the BSM function is enabled

on the

screen of the multi-infor-

mation display.

WARNING

■

If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by your Toyota dealer
immediately if this occurs.

NOTICE

■

To prevent damage to the engine and its components

The engine may be overheating if the high coolant temperature warning
light comes on or flashes. In this case, immediately stop the vehicle in a
safe place, and check the engine after it has cooled completely. (



P. 656)

115

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

2

Instru

me
nt clu

ster

Main display

The units used on the display may differ depending on the target region.

The main display shows basic information, such as the vehicle
speed and remaining fuel amount. Also, the displayed informa-
tion can be switched according to user preference.

Display contents (vehicles without RSA [Road Sign Assist])

Simple screen

*

Split screen

*

*

: Refer to P. 121 for details on how to change the screen display.

116

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

Speedometer

Displays the vehicle speed

Fuel gauge

Displays the quantity of fuel remaining in the tank

Outside temperature

Displays the outside temperature within the range of -40°F (-40°C) to
122°F (50°C).
The temperature display flashes for approximately 10 seconds when the
outside temperature drops to approximately 37



F (3



C) or less, and then

stops flashing.

Mileage display (odometer/trip meters/driving range)

The possible driving range estimated from the mileage and current remain-
ing fuel amount can be displayed. (



P. 119)

Average fuel consumption display

The average fuel consumption that is linked with the contents of the mile-
age display can be displayed. (



P. 119)

Sub-screen

When split screen is selected for the main display, information such as the
Hybrid System Indicator and current fuel consumption can be displayed.
(



P. 121)

1

2

3

4

5

6

PRIUS_OM_OM47E09U_(U)

117

2. Instrument cluster

2

Instru

me
nt clu

ster

The units used on the display may differ depending on the target region.

Display contents (vehicles with RSA [Road Sign Assist])

118

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

Speedometer

Displays the vehicle speed

Fuel gauge

Displays the quantity of fuel remaining in the tank

Outside temperature

Displays the outside temperature within the range of -40°F (-40°C) to
122°F (50°C).
The temperature display flashes for approximately 10 seconds when the
outside temperature drops to approximately 37°F (3°C) or less, and then
stops flashing.

Mileage display (odometer/trip meters/driving range)

The possible driving range estimated from the mileage and current remain-
ing fuel amount can be displayed. (



P. 119)

Average fuel consumption display

The average fuel consumption that is linked with the contents of the mile-
age display can be displayed. (



P. 119)

Sub-screen (when RSA [Road Sign Assist] is off)

Information such as the Hybrid System Indicator and current fuel con-
sumption can be displayed. (



P. 122)

Sub-screen (when RSA [Road Sign Assist] is on)

Displays information related to RSA (Road Sign Assist)

*

. (



P. 322)

*

: When RSA (Road Sign Assist) information is displayed in the

screen

of the multi-information display (



P. 150), RSA (Road Sign Assist) infor-

mation is not displayed on the sub-screen.

1

2

3

4

5

6

7

PRIUS_OM_OM47E09U_(U)

119

2. Instrument cluster

2

Instru

me
nt clu

ster

Each time

is pressed, the mileage display and fuel consumption

display change in the following order from 1 to 6.

Mileage display
Average fuel consumption dis-
play

After 1 to 6 are displayed, the dis-
plays return to 1.
Use the displayed average fuel
consumption as a reference.

Switching the mileage display and average fuel consumption
display

1

2

120

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

*

1

: If

is pressed and held while this item is displayed, the information is

reset.

*

2

: This item is reset each time the hybrid system starts.

Mileage display

Average fuel consumption display

1

ODO (Odometer)

Total mileage

Average fuel consumption since
last reset

Average fuel consumption since
last reset

*

1

2

TRIP A (Trip meter A)

Mileage since last reset

*

1

TRIP A average fuel consumption

Average fuel consumption since
TRIP A was reset

*

1

3

TRIP B (Trip meter B)

Mileage since last reset

*

1

TRIP B average fuel consumption

Average fuel consumption since
TRIP B was reset

*

1

4

(Mileage since hybrid sys-

tem was started)

Mileage since hybrid system
started

*

2

Average fuel consumption after
hybrid system started

Average fuel consumption since
hybrid system was started

*

2

5

(Distance to empty)

Approximate distance vehicle
can travel based on current
remaining fuel amount

Blank screen

6

Blank screen

Blank screen

1

2

PRIUS_OM_OM47E09U_(U)

121

2. Instrument cluster

2

Instru

me
nt clu

ster

Simple screen or split screen can be selected for the main display.

When split screen is selected, a variety of information can be displayed on
a sub-screen in addition to the contents of the simple screen.

Select the “Meter Customize” settings (

) screen on the

screen of the multi-information display, and then press

.

(



P. 151)

Press

or

of the meter control switches to select “Simple/

Split Screen”.

Press

to display the setting screen.

Press

or

of the meter

control switches to select a dis-
play mode.

Press

.

The contents of the main display switch to the selected display mode.
Press

to return to the previous screen.

Switching the display mode (vehicles without RSA [Road Sign
Assist])

1

2

3

4

5

122

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster



Vehicles without RSA (Road Sign Assist)

When split screen is selected for the main display, display contents on
the sub-screen can be selected.



Vehicles with RSA (Road Sign Assist)

When RSA is off, display contents on the sub-screen can be selected.

Press

or

of the meter

control switches and select the
sub-screen.

When the sub-screen is selected,

is displayed on the sub-

screen.

Press

or

of the meter control switches to select the display

item.

One of the following 3 items can be displayed.

Switching contents displayed on the sub-screen

1

2

Display contents

Detail

Hybrid System Indicator

A convenient Hybrid System Indicator is displayed.
Refer to P. 129 for details on how to read the Hybrid
System Indicator.

Current fuel consumption

The current fuel consumption during driving is dis-
played.

• The

mark indicates the value displayed in the

average fuel consumption display (



P. 119).

Switching the average fuel consumption display
also changes the position of the

mark.

• When the average fuel consumption is reset, the

position of the

mark is reset to 0.

Hybrid battery (traction battery) status

The same contents as the hybrid battery (traction
battery) status on the energy monitor are displayed.
(



P. 128)

PRIUS_OM_OM47E09U_(U)

123

2. Instrument cluster

2

Instru

me
nt clu

ster

■

Outside temperature display

●

In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has changed suddenly (at the entrance/

exit of a garage, tunnel, etc.)

●

When “-” or “E” is displayed, the system may be malfunctioning.
Take your vehicle to your Toyota dealer.

■

Distance to empty

●

This distance is computed based on your average fuel consumption. As a
result, the actual distance that can be driven may differ from that displayed.

●

When only a small amount of fuel is added to the tank, the display may not
be updated.
When refueling, turn the power switch off. If the vehicle is refueled without
turning the power switch off, the display may not be updated.

■

Switching the driving mode (



P. 347)

*

: The animation displayed when the driving mode is switched can be turned

off in the “Meter Customize” settings. (



P. 153)

When the driving mode is switched, the
driving mode indicator changes and an
animation

*

is displayed on the multi-infor-

mation display.
Also, the background color of the main
display, energy monitor (



P. 127) and

Hybrid System Indicator (



P. 129)

change as follows.

Driving modes

Background color

Normal mode

Green

Power mode

Red

Eco drive mode

Blue

124

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

Multi-information display

Information related to each icon
on the upper portion of the multi-
information display can be dis-
played by operating the meter
control switches to select the icon.

Icons are displayed when pressing

or

of the meter control

switches and turn off shortly after
pressing the switch.
Screens linked with vehicle functions may be automatically displayed
according to the operation status of the corresponding functions.

A variety of information related to the vehicle can be displayed,
including the operation status of each system and data related
to Eco driving, and the settings of each system can be changed
according to user preference.

Display contents

PRIUS_OM_OM47E09U_(U)

125

2. Instrument cluster

2

Instru

me
nt clu

ster

*

1

: If equipped

*

2

: When there is a warning message that can be displayed, the color of

changes to amber.

Menu icons

Contents

Pages

Drive information

The energy monitor that shows the operation
status of the hybrid system, or other informa-
tion such as fuel consumption is displayed.

P. 126

Clock setting display

The clock settings can be changed.

P. 144

Navigation system-linked display

*

1

The information related to the navigation sys-
tem is displayed.

P. 145

Audio system-linked display

*

1

The audio system settings can be changed.

P. 145

Air conditioning system settings screen

The air conditioning system settings can be
changed.

P. 146

Driving assist system information

The information related to driving assist sys-
tems such as the LTA (Lane Tracing Assist)

*

1

and dynamic radar cruise control with full-
speed range

*

1

is displayed.

P. 150

Warning message display

*

2

The warning messages are displayed.

P. 150

Settings display

The settings of the vehicle functions, meter
display, etc. can be changed.

P. 151

126

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

Press

or

of the meter control switches and select the icon

of the desired item.

The selected icon is highlighted and the display switches to the information
screen.
When split screen display is selected for the main display or RSA (Road
Sign Assist)

*

is off, the sub-screen of the main display can also be

selected. (



P. 122)

*

: If equipped

Press

or

of the meter control switches to switch the con-

tents of the display.
Press

on screens where it

is necessary to select or con-
firm an item.

On screens with tab displays,
pressing

selects the tab dis-

play, and the screen display can be
changed by pressing

or

of

the meter control switches.

Press

to return to the previous screen.

When

is selected, the following information can be displayed by

pressing

or

of the meter control switches.

●

Energy monitor (



P. 127)

●

Hybrid System Indicator (



P. 129)

●

“Fuel Consumption Record” (



P. 133)

●

“Drive Monitor” (



P. 137)

●

“Eco Savings” (



P. 138)

●

“Eco-Diary” (



P. 141)

●

AWD display (for AWD vehicles only) (



P. 143)

Basic Operations

1

2

Tab display

3

Drive information

4

PRIUS_OM_OM47E09U_(U)

127

2. Instrument cluster

2

Instru

me
nt clu

ster

◆

Energy monitor

The energy monitor can be used to check the vehicle drive status,
hybrid system operation status and energy regeneration status.
When energy is flowing, an arrow appears and a bright point of light
moves to show the direction of the flow of energy. When energy is
not flowing, the bright point of light is not displayed.

Gasoline engine
Electric motor
(traction motor)
Hybrid battery
(traction battery)
Tire
Bright point of light showing
the flow of energy

As an example, all arrows are shown in the illustration, but the actual con-
tents of the display will differ.

(Display example)

●

When the hybrid battery (traction battery) is being charged, the
bright point of light moves towards

.

●

During driving, the bright point of light moves from

or

(or

both depending on the situation) towards

.

*

●

During driving, the image of the tires rotates.

*

: The display may differ depending on the driving status.

1

2

3

4

5

3

1

2

4

128

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

Hybrid battery (traction battery) status

●

The display changes in 8 levels according to the remaining charge amount
of the hybrid battery (traction battery).

●

The hybrid battery (traction battery) status is also displayed on the following
screen, but the contents of the display are the same.
• Sub-screen of the main display (



P. 122)

• Hybrid System Indicator (



P. 129)

• Head-up display (if equipped) (



P. 158)

●

The charge amount of the hybrid battery (traction battery) is automatically
controlled by the hybrid system. For this reason, even if electricity is recov-
ered via the regenerative braking, or electricity is generated via the gasoline
engine, the displayed hybrid battery (traction battery) charge amount may
not reach the highest level (level 8). However, this does not indicate a mal-
function.

■

Remaining charge amount warning of hybrid battery (traction battery)

●

The buzzer sounds intermittently when the hybrid battery (traction battery)
remains without charging while the shift position is in N, or the remaining
charge amount drops below a certain level.
If the remaining charge amount drops further, the buzzer sounds continu-
ously.

●

When a warning message is shown on the multi-information display and the
buzzer sounds, follow the instructions displayed on the screen to perform
troubleshooting.

Low
High

1

2

PRIUS_OM_OM47E09U_(U)

129

2. Instrument cluster

2

Instru

me
nt clu

ster

◆

Hybrid System Indicator

The display changes according to accelerator pedal operation and
displays the current driving status and energy regeneration status.

The Hybrid System Indicator can be displayed on the sub-screen of the
main display (



P. 122) and the head-up display (if equipped)

(



P. 158).

■

How to read the display

Charge area

Shows that energy is being recovered via the regenerative charging.

Eco area

Shows that the vehicle is being driven in an Eco-friendly manner.

Power area

Shows that an Eco-friendly driving range is being exceeded (during full
power driving etc.)

Hybrid Eco area

*

1

Shows that gasoline engine power is not being used very often.
The gasoline engine will automatically stop and restart under various
conditions.

Head-up display

(if equipped)

Sub-screen

Multi-information

display

1

2

3

4

130

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

EV indicator

*

2, 3

The EV indicator comes on when the vehicle is driven using only the
electric motor (traction motor) or the gasoline engine is stopped.

Hybrid battery (traction battery) status



P. 128

Eco score



P. 131

●

By keeping the indicator within Eco area, more Eco-friendly driv-
ing can be achieved.

●

Charge area indicates regeneration

*

4

status. Regenerated

energy will be used to charge the hybrid battery (traction battery).

*

1

: Not displayed on the sub-screen.

*

2

: Not displayed on the sub-screen or head-up display.

*

3

: The EV indicator function can be turned off in the “Meter Customize”

settings. (



P. 153)

*

4

: When used in this manual, “regeneration” refers to the conversion of

energy created by the movement of the vehicle into electrical energy.

■

“ECO Accelerator Guidance”

A blue zone is displayed in the
Eco area which can be used as
a reference operation range for
using the accelerator pedal
according to driving conditions
such as starting off and cruis-
ing.

The “ECO Accelerator Guid-
ance” display changes accord-
ing to the driving status, such as
when starting off or cruising.
It is easier to drive in an Eco-friendly manner by driving according to the
display showing the accelerator pedal operations and staying within the
“ECO Accelerator Guidance” range. (



P. 229)

The “ECO Accelerator Guidance” function can be turned off in the
“Meter Customize” settings. (



P. 153)

5

6

7

“ECO Accelerator Guidance”

PRIUS_OM_OM47E09U_(U)

131

2. Instrument cluster

2

Instru

me
nt clu

ster

■

Eco score

The driving status for the following 3 situations are evaluated in 5
levels: Smooth start-off acceleration (“Eco-Start”), driving without
sudden acceleration (“Eco-Cruise”) and smooth stopping (“Eco-
Stop”). Each time the vehicle is stopped, a score result is displayed
out of a perfect score of 100 points.

Score result
“Eco-Start” status
“Eco-Cruise” status
“Eco-Stop” status

How to read the bar display:

*

: For items not currently evaluated, the display reads 0.

●

The Eco score is reset each time the vehicle starts off to start a new
evaluation.

●

When the shift position is P, only the Eco score display area is
enlarged and displayed. When the shift position is shifted from P,
the display returns to normal.

●

When the hybrid system stops, the current total score result and
advice on how to increase the score are displayed. (



P. 102)

1

2

3

4

Score

Low

*

High

Bar display

132

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

When operation of each function stops

●

The Hybrid System Indicator stops operating in the following situations.
• The “READY” indicator is not illuminated.
• The shift position is not D or B.

●

The Eco score and “ECO Accelerator Guidance” stop operating in the fol-
lowing situations.
• The Hybrid System Indicator is not operating.
• Cruise control (if equipped) or dynamic radar cruise control with full-

speed range (if equipped) is being used.

■

About the Eco score

●

After starting off, Eco score display does not start until the vehicle speed
exceeds approximately 19 mph (30 km/h).

●

In addition to the vehicle driving status, the Eco score also evaluates the air
conditioning system usage condition (



P. 148). The score displayed when

the hybrid system stops is the total result of the driving status after the
hybrid system starts and the air conditioning usage condition.

■

Predictive Efficient Drive (Predictive Deceleration Support) (vehicles
with 11.6-inch display)

When a predictive deceleration support point registered in the navigation sys-
tem is approached, the system turns off the Eco accelerator guide and
informs the driver of releasing the accelerator pedal early.
For details about Predictive Efficient Drive (Predictive Deceleration Support),
refer to “NAVIGATION SYSTEM OWNER’S MANUAL”.

PRIUS_OM_OM47E09U_(U)

133

2. Instrument cluster

2

Instru

me
nt clu

ster

◆

“Fuel Consumption Record”

The transitions of the average fuel consumption after the hybrid
system starts can be checked in such a unit as every 5 minutes or
every 1 mile (1.6 km)

*

1

or 1 km (0.6 mile)

*

2

of driving. Also, it is

possible to check the average fuel consumption history for each
month by switching to the “Monthly” display.

*

1

: When the unit is set to “MPH”

*

2

: When the unit is set to “km/h”

■

How to read the screen

The “5 min” display is shown as an example. However, the basic
method for how to read the screen is the same for each fuel con-
sumption history screen.

Current average fuel con-
sumption record (yellow dis-
play)

*

1

When the recorded unit is
exceeded (every 5 min., every
1 mile [1.6 km]

*

2

or 1 km

[0.6 mile]

*

3

, etc.) the currently

displayed

history

moves

towards the left side and the old-
est record is deleted.

Past average fuel consumption record (green display)
Tab display

Displays types of “Fuel Consumption Record”.

*

1

: When displayed by “Monthly”, the average fuel consumption for the cur-

rent month is displayed.

*

2

: When the unit is set to “MPH”

*

3

: When the unit is set to “km/h”

1

2

3

134

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

Types of “Fuel Consumption Record”



When the unit is set to “MPH”

*

1

: This record is reset each time the hybrid system stops.

*

2

: The maximum value of the graph can be switched in 3 levels (150 MPG,

100 MPG and 50 MPG) by operating the

or

of the meter control

switches while the “Monthly” tab display is selected.

*

3

: The “Monthly” record can be reset on the “Meter Customize” settings

screen. (



P. 153)

Tab display

Recorded contents

Recorded range

“5 min”

Average fuel consumption
of every 5 minutes

*

1

The past 30 minutes

“1 miles”

Average fuel consumption
of every 1 mile (1.6 km)
driven

*

1

The last 15 miles (24.1 km)
driven

“5 miles”

Average fuel consumption
of every 5 miles (8 km)
driven

*

1

The last 30 miles (48.3 km)
driven

“Monthly”

Average fuel consumption
of this month

*

2, 3

Record of last 4 months and
the same month of the pre-
vious year

PRIUS_OM_OM47E09U_(U)

135

2. Instrument cluster

2

Instru

me
nt clu

ster



When the unit is set to “km/h”

*

1

: This record is reset each time the hybrid system stops.

*

2

: The maximum value of the graph can be switched in 3 levels (10 L/100 km,

6 L/100 km and 3 L/100 km) by operating the

or

of the meter con-

trol switches while the “Monthly” tab display is selected.

*

3

: The “Monthly” record can be reset on the “Meter Customize” settings

screen. (



P. 153)

Tab display

Recorded contents

Recorded range

“5 min”

Average fuel consumption
of every 5 minutes

*

1

The past 30 minutes

“1 km”

Average fuel consumption
of every 1 km (0.6 mile)
driven

*

1

The last 15 km (9.3 miles)
driven

“5 km”

Average fuel consumption
of every 5 km (3.1 miles)
driven

*

1

The last 30 km (18.6 miles)
driven

“Monthly”

Average fuel consumption
of this month

*

2, 3

Record of last 4 months and
the same month of the pre-
vious year

136

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

Switching the fuel consumption history screen

While the “Fuel Consumption Record” screen is displayed, press

.

The tab display is selected and it is possible to switch the contents of
the display.

Press

or

of the meter control switches to switch the con-

tents of the display.

Each time

is pressed, the display switches in the following order:



When the unit is set to “MPH”

“5 min”, “1 miles”, “5 miles” and “Monthly”

*

. When

is pressed, it

switches in the reverse order.



When the unit is set to “km/h”

“5 min”, “1 km”, “5 km” and “Monthly”

*

. When

is pressed, it switches

in the reverse order.

*

: After “Monthly”, the display returns to “5 min”.

■

Calendar settings



P. 156

1

2

PRIUS_OM_OM47E09U_(U)

137

2. Instrument cluster

2

Instru

me
nt clu

ster

◆

“Drive Monitor”

Displays information such as the driving time and average vehicle
speed, which are linked with the current mileage display. (



P. 119)

Current contents of the dis-
play

Displayed information shows
which driving record the cur-
rently displayed contents are
based on.

“Elapsed Time”
“Average Speed”
“EV Driving Ratio”

For the displayed distance of the mileage display, the percent traveled
using only electric motor power is displayed.

Each time

is pressed, the mileage display (



P. 119) switches

and the contents of the “Drive monitor” change as follows.

*

1

: When the average fuel consumption is reset (



P. 120), the “Drive monitor”

display is also reset.

*

2

: When the trip meter is reset (



P. 120), the “Drive monitor” display is also

reset.

*

3

: This item is reset each time the hybrid system starts.

1

2

3

4

Mileage display

Contents of the “Drive monitor”

ODO

After Reset

Information since last reset

*

1

TRIP A

TRIP A

Information based on driving record of
TRIP A

*

2

TRIP B

TRIP B

Information based on driving record of
TRIP B

*

2

After Start

Information since hybrid system was
started

*

3

Blank screen

1

138

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

◆

“Eco Savings”

“Gasoline Price”

*

1

and “COMP. Consumption” information is regis-

tered in the “Meter Customize” settings (



P. 153), making it possi-

ble to display 2 types of information related to gasoline fuel
consumption.



“SAVINGS”

If information about the vehicle used to compare fuel consumption
(“COMP. Consumption”) is entered, when the fuel consumption of
this vehicle according to the mileage of the trip meter

*

2

is greater

than that of the comparison vehicle, an estimation

*

3

of the amount

of the fuel cost savings is displayed.



“FUEL COST”

If information about the vehicle used to compare fuel consumption
(“COMP. Consumption”) is not entered, an estimation

*

3

of the

amount of fuel cost savings is displayed according to the mileage of
the trip meter

*

2

.

*

1

: “Gasoline Price” is information necessary to display the “SAVINGS”

and “FUEL COST” records.

*

2

: The display can be switched from the mileage history to the history by

month. (



P. 140)

*

3

: The displayed amount is only an estimate, and may differ from the

actual amount.

PRIUS_OM_OM47E09U_(U)

139

2. Instrument cluster

2

Instru

me
nt clu

ster

■

How to read the display

Trip meter distance traveled

*

Estimate of fuel consumption saved for displayed distance trav-
eled

*

Estimate of fuel expenses necessary to drive currently displayed
distance

*

Estimate of fuel expenses to drive currently displayed distance
(your vehicle)

*

Estimate of fuel expenses to drive currently displayed distance
(comparison vehicle)

*

*

: When the trip meter is reset (



P. 120), the “Eco Savings” record is also

reset.

“FUEL COST” display

“SAVINGS” display

1

2

3

4

5

140

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

Checking monthly record

The display can be switched to “TRIP” or “Monthly” by pressing

with the tab display selected, and then pressing

or

of the

meter control switches.
Using the “Monthly” display, the
monthly records for “SAVINGS”
and “FUEL COST” can be
checked.

The records for the past 5
months can be displayed by
operating

of the meter con-

trol switches with the “Monthly”
tab display selected.
To reset the “Monthly” contents, perform “History Reset” in the “Meter
Customize” settings (



P. 153).

PRIUS_OM_OM47E09U_(U)

141

2. Instrument cluster

2

Instru

me
nt clu

ster

◆

“Eco-Diary”

The distance traveled and average fuel consumption history can be
displayed in a table according to day (“Daily”) or month (“Monthly”)
units.

■

How to read the display

Record of the day/month
Date/month of stored information
Total distance traveled for the day/month
Average fuel consumption of the day/month
Tab display

The display can be switched between “Daily” and “Monthly” by pressing

to enter the select condition, and then operating

or

of the

meter control switches.

“Monthly” display

“Daily” display

1

2

3

4

5

142

PRIUS_OM_OM47E09U_(U)

2. Instrument cluster

■

Checking history

When each screen is selected, past records from the following

ranges can be displayed by pressing

or

of the meter con-

trol switches.

●

If the above number of records is exceeded, the oldest informa-
tion is deleted.

●

To reset the history, perform “History Reset” in the “Meter Cus-
tomize” settings (



P. 153). (“Daily” and “Monthly” information

can be reset independently.)

■

Calendar settings



P. 156

Displayed screen

Displayed information

Stored information

“Daily”

4 reports

Up to 32 reports

(8 screens)

“Monthly”

Up to 12 reports

(3 screens)

PRIUS_OM_OM47E09U_(U)

143

2. Instrument cluster

2

Instru

me
nt clu

ster

◆

AWD display (for AWD vehicles only)

Displays the drive status of each wheel in 6 steps from 0 to 5.

Front-left wheel drive status
Front-right wheel drive status
Rear-left wheel drive status
Rear-right wheel drive status

How to read the drive status display:

■

About drive status display

●

Indicates the drive status of each wheel by the number of bars based on the
driving conditions and AWD system.

●

When the drive power to each wheel is large, the number of bars increases,
and when the drive power is small the number of bars decreases.

●

When the number of bars to the rear wheels is small, the system determines
that stable driving is being performed and the AWD function is suppressed
to increase fuel economy.

1

2

3

4

Drive status

Not being driven

Maximum drive power

Indicators