Toyota Echo (2005 year). Instruction — part 6
—Using a top strap
D If the seat belt does not function
normally, it cannot protect your
child from death or serious injury.
Contact your Toyota dealer immedi-
ately. Do not install the child re-
straint system on the seat until the
seat belt is fixed.
2. To remove the child restraint system,
Follow the procedure below for a child
press the buckle release button and
restraint system that use of a top strap
allow the belt to retract.
to secure the system. Follow all the
installation instructions provided by its
manufacturer.
67
2005 ECHO from Aug. ’04 Prod. (OM52636U)
Symbol
Anchor brackets
Use the anchor bracket on the back
TO USE THE ANCHOR BRACKET:
2. Open the anchor bracket cover with
panel to attach the top strap.
the mark shown in the illustration.
1. Remove the head restraint.
Anchor brackets are installed for each
rear seating position.
This symbol indicates the location of user
ready anchor brackets.
68
2005 ECHO from Aug. ’04 Prod. (OM52636U)
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
3. Securely fasten the child restraint
4. Replace the head restraint.
system with the seat belt.
Be sure to replace all covers when the
Latch the hook onto the anchor
anchor bracket is not in use.
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see
“Child restraint” on
page 56.
69
2005 ECHO from Aug. ’04 Prod. (OM52636U)
—Installation with child
restraint lower anchorages
The lower anchorages for the child re-
straint system interfaced with the
FMVSS225 or CMVSS210.2 specification
are installed in the rear seat.
The anchorages are installed in the gap
between the seat cushion and seatback of
both outside rear seats.
Child restraint system interfaced with the
FMVSS213 or CMVSS213 specification
can be fixed with these anchorages. In
this case, it is not necessary to fix the
child restraint system with a seat belt on
the vehicle.
Canada only
Canada only
Type A (anchor position indicated by but-
Type A
(anchor position indicated by
tons)
tags)
70
2005 ECHO from Aug. ’04 Prod. (OM52636U)
CHILD
RESTRAINT
SYSTEM
INSTALLATION
Type A—
1. Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the lower an-
chorages below the button or tag in
the seatback.
2. Latch the hooks of lower straps onto
the anchorages and tighten the lower
straps.
Type B—
1. Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the lower an-
chorages below the button or tag in
the seatback.
2. Latch the buckles onto the anchor-
ages.
For owners in Canada
The symbol on a child restraint system
indicates the presence of a lower connec-
tor system.
If your child restraint system has a top
Canada only
Canada only
strap, it should be anchored.
(For the
installation of the top strap, see
“—Using
a top strap” on page 67.)
Type B (anchor position indicated by but-
Type B
(anchor position indicated by
tons)
tags)
71
2005 ECHO from Aug. ’04 Prod. (OM52636U)
For installation details, refer to the instruc-
tion manual equipped with each product.
CAUTION
When installing the child restraint
CAUTION
system, pay attention not to catch a
seat belt and other irregular objects.
D When using the lower anchorages
Otherwise, this can cause severe inju-
for the child restraint system, be
ry to the child in case of a sudden
sure that there are no irregular ob-
braking or collision.
jects around the anchorages or that
the seat belt is not caught.
D Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
On the vehicle with non−separate non−
its manufacturer.
foldable fixed type seatback, a seat belt
D Do not install a child restraint sys-
for the rear center seat is prepared in the
tem on the rear seat if it interferes
front of a lower anchor. Therefore, in case
with the lock mechanism of the
of fixing the child restraint system to the
front seats. Otherwise, the child or
rear left seat, slide the seat belt for the
front seat occupant(s) may be killed
rear center seat as shown in the illustra-
or seriously injured in case of sud-
tion and fix it to the lower anchor.
den braking or a collision.
72
2005 ECHO from Aug. ’04 Prod. (OM52636U)
SECTION 1− 4
OPERATION OF INSTRUMENTS AND
CONTROLS
Steering wheel and Mirrors
Tilt steering wheel
74
Outside rear view mirrors
74
Anti−glare inside rear view mirror
77
Vanity mirrors
77
73
2005 ECHO from Aug. ’04 Prod. (OM52636U)
Tilt steering wheel
Outside rear view mirrors—
CAUTION
D Do not adjust the steering wheel
while the vehicle is moving. Doing
so may cause the driver to mishan-
dle the vehicle and an accident may
occur resulting in death or serious
injuries.
D After adjusting the steering wheel,
try moving it up and down to make
sure it is locked in position.
To change the steering wheel angle,
Adjust the mirror so that you can just
hold the steering wheel, push down the
see the side of your vehicle in the mir-
lock release lever, tilt the steering
ror.
wheel to the desired angle and return
Be careful when judging the size or dis-
the lever to its original position.
tance of any object seen in the outside
rear view mirror on the passenger’s side
because it is a convex mirror. Any object
seen in a convex mirror will look smaller
and farther away than when seen in a flat
mirror.
74
2005 ECHO from Aug. ’04 Prod. (OM52636U)
—Power rear view mirror
control
CAUTION
NOTICE
If ice should jam the mirror, do not
Do not adjust the mirror while the
operate the control or scrape the mir-
vehicle is moving. Doing so may
ror face. Use a spray de−icer to free
cause the driver to mishandle the ve-
the mirror.
hicle and an accident may occur re-
sulting in death or serious injuries.
To adjust mirror, use the switches.
1. Master switch—To select the mirror to
be adjusted
Push the switch to
“L”
(left) or
“R”
(right).
2. Control switch—To move the mirror
Push the switch in the desired direc-
tion.
Mirrors can be adjusted when the key is
in the
“ACC” or “ON” position.
75
2005 ECHO from Aug. ’04 Prod. (OM52636U)
—Rear view mirror remote
control
—Folding rear view mirrors
NOTICE
Do not push backward more than the
click. It may damage the mirror or
vehicle.
To adjust the rear view mirror, simply
The rear view mirrors can be folded
operate the control lever.
backward for parking in compact areas.
To fold the rear view mirror, push back-
NOTICE
ward.
If ice should jam the mirror, do not
operate the control or scrape the mir-
CAUTION
ror face. Use a spray de−icer to free
the mirror.
Do not drive with the mirrors folded
backward. Both the driver and pas-
senger side rear view mirrors must
be extended and properly adjusted
before driving.
76
2005 ECHO from Aug. ’04 Prod. (OM52636U)
Anti−glare inside rear view
mirror
Vanity mirrors
CAUTION
Do not adjust the mirror while the
vehicle is moving. Doing so may
cause the driver to mishandle the ve-
hicle and an accident may occur re-
sulting in death or serious injuries.
Adjust the mirror so you can just see
To use the vanity mirrors, swing down
the rear of your vehicle in the mirror.
the sun visor and open the cover.
To reduce glare from the headlights of
the vehicle behind you during night
driving, operate the lever on the lower
edge of the mirror.
Daylight driving—Lever at position
1
The reflection in the mirror has greater
clarity at this position.
Night driving—Lever at position 2
Remember that by reducing glare you also
lose some rear view clarity.
77
2005 ECHO from Aug. ’04 Prod. (OM52636U)
78
2005 ECHO from Aug. ’04 Prod. (OM52636U)
SECTION 1− 5
OPERATION OF INSTRUMENTS AND
CONTROLS
Lights, Wipers and Defogger
Headlights and turn signals
80
Emergency flashers
81
Instrument panel light control
82
Front fog lights
82
Interior light
82
Windshield wipers and washer
83
Rear window defogger
84
79
2005 ECHO from Aug. ’04 Prod. (OM52636U)
Headlights and turn signals
NOTICE
To prevent the battery from being dis-
charged, do not leave the lights on
for a long period when the engine is
not running.
Daytime running light system
The headlights turn on at reduced intensi-
ty when the parking brake is released with
the engine started, even with the light
switch in the “OFF” position. They will not
go off until the ignition switch is turned
HEADLIGHTS
off.
High−Low beams—For high beams, turn
To turn on the other exterior lights and
the headlights on and push the lever away
To turn on the following lights: Twist
instrument panel lights, twist the knob to
from you
(position
1). Pull the lever to-
the headlight/turn signal lever knob.
position
1.
ward you (position 2) for low beams.
Position
1—Parking, tail, license plate,
Twist the knob to position
2 to turn the
The headlight high beam indicator light
side marker and instrument panel lights
headlights to full intensity for driving at
(blue light) on the instrument panel will
Position
2—Headlights and all of the
night.
tell you that the high beams are on.
above
Vehicles for the U. S. A.: The headlights
Flashing the high beam headlights
Light reminder buzzer
automatically turn to full intensity in the
(position
3)—Pull the lever all the way
A buzzer will remind you to turn the lights
twilight even with the light switch in the
back. The high beam headlights turn off
off when the driver’s door is opened if you
“OFF” position.
when you release the lever.
remove the key with the headlights and
You can flash the high beam headlights
tail lights left on.
with the knob turned to
“OFF”.
80
2005 ECHO from Aug. ’04 Prod. (OM52636U)
Emergency flashers
NOTICE
To prevent the battery from being dis-
charged, do not leave the switch on
longer than necessary when the en-
gine is not running.
TURN SIGNALS
To turn on the emergency flashers,
push the switch.
To signal a turn, push the headlight/
turn signal lever up or down to position
All the turn signal lights will flash. To turn
1.
them off, push the switch once again.
The key must be in the “ON” position.
Turn on the emergency flashers to warn
other drivers if your vehicle must be
The lever automatically returns after you
stopped where it might be a traffic hazard.
make a turn, but you may have to return
it by hand after you change lanes.
Always pull as far off the road as pos-
sible.
To signal a lane change, move the lever
up or down to the pressure point (position
The turn signal light switch will not work
2) and hold it.
when the emergency flashers are operat-
ing.
If the turn signal indicator lights
(green
lights) on the instrument panel flash faster
than normal, a front or rear turn signal
bulb is burned out.
81
2005 ECHO from Aug. ’04 Prod. (OM52636U)
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст