Toyota Sequoia (2005). Manual — part 15
B13807
A: Propeller Shaft Spiders
B: Propeller Shaft Sliding Yokes
A
B
A
A
MA0568
MA–10
–
MAINTENANCE
CHASSIS
57
(b)
Recoat the drive shaft thrust bush with grease (See page
11.
4WD:
LUBRICATE PROPELLER SHAFT AND TIGHTEN
BOLTS
(a)
Lubricate the propeller shaft, referring to the lubrication
chart. Before pumping in grease, wipe off any mud and
dust on the grease fitting.
Grease grade:
Propeller shaft (Except Double–cardan joint)
Lithium base chassis grease NLGI No.2
(b)
Tighten the bolts for propeller shaft.
(2WD: See page
)
)
12.
ROTATE TIRE (See page
13.
TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
(a)
Tighten the following parts:
Seat mounting bolts
Torque:
37 N·m (375 kgf·cm, 27 ft·lbf)
B02100
–
MAINTENANCE
CHASSIS
MA–11
58
Leaf spring U–bolt mounting nuts
Torque: 133 N·m (1,350 kgf·cm, 98 ft·lbf )
(b)
Under Severe Conditions:
In addition to the above maintenance items, check for
loose or missing bolts and nuts on the following.
Steering system
Drive train
Suspension system
Fuel tank mounts
Engine mounts, etc.
14.
FINAL INSPECTION
(a)
Check operation of body parts:
Hood:
Auxiliary catch operates properly
Hood locks securely when closed
Doors:
Door locks operate properly
Doors close properly
Seats:
Seat adjusts easily and locks securely in any
positions
Seat backs lock securely at any angle
Fold–down seat backs lock securely
(b)
Road test:
Engine and chassis parts do not have abnormal
noises.
Vehicle does not wander or pull to one side.
Brakes work properly and do not drag.
(c)
Be sure to deliver a clean vehicle and especially check:
Steering wheel
Shift lever knob
All switch knobs
Door handles
Seats
PP1D4–02
–
PREPARATION
MAINTENANCE
PP–1
59
MAINTENANCE
EQUIPMENT
Mirror
Brake hose
PP1D5–02
PP–2
–
PREPARATION
MAINTENANCE
60
LUBRICANT
Item
Capacity
Classification
Brake fluid
–
SAE J1703 or FMVSS No.116 DOT3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст