Toyota Sequoia (2005). Manual — part 600
I28240
*1
*2
*3
*4
*5
*6
I28226
PKB OFF
REV OFF
SPEED 49km/h
TAIL OFF
I28974
–
DIAGNOSTICS
NAVIGATION SYSTEM
DI–2195
2389
(4)
LAN Monitor (Individual) Screen
Screen Description
Display
Contents
Device name/*1
Target device
Segment/*2
Target logical address
DTC/*3
DTC (Diagnostic Trouble Code)
Sub–Code (device address)/*4
Physical address stored with DTC (If there is no address, nothing is displayed.).
Connection check No./*5
Connection check number stored with DTC.
DTC occurrence/*6
Number of times the same DTC has been recorded.
(b)
DISPLAY CHECK
(1)
Vehicle Signal Check Mode Screen
Screen Description
Name
Contents
PKB
Parking brake ON/OFF state is displayed.
REV
Reverse signal ON/OFF state is displayed.
SPEED
Vehicle speed is displayed in km/h.
TAIL
TAIL signal (Head lamp dimmer switch) ON/OFF state is displayed.
HINT:
Only items sending a vehicle signal will be displayed.
This screen is updated once per second when input signals to the vehicle are changed.
I28242
I28243
*2
*3
*2
*5
*4
*1
*1
DI–2196
–
DIAGNOSTICS
NAVIGATION SYSTEM
2390
(c)
NAVIGATION CHECK
(1)
Navigation Check Screen
HINT:
Each item is grayed out or not displayed based on the device settings.
(2)
GPS information Screen
Satellite information/*1
(3)
Information from a maximum of 12 satellites is displayed on the screen. This information includes
the target GPS satellite number, elevation angle, direction and signal level.
Receiving condition/*2
(DENSO model)
Display
Contents
T
The system is receiving a GPS signal, but is not using it for location.
P
The system is using the GPS signal for location.
–
The system cannot receive a GPS signal.
(AISIN AW model)
Display
Contents
01H
The system cannot receive a GPS signal.
02H
The system is tracing a satellite.
03H
The system is receiving a GPS signal, but is not using it for location.
04H
The system is using the GPS signal for location.
Measurement information/*3
Display
Contents
2D
2–dimensional location method is being used.
3D
3–dimensional location method is being used.
NG
Location data cannot be used.
Error
Reception error has occurred.
–
Any other state.
I28244
*1
*2
*3
I28245
*1
*2
*3
*4
–
DIAGNOSTICS
NAVIGATION SYSTEM
DI–2197
2391
Position information/*4
Display
Contents
Position
Latitude and longitude information on the current position is displayed.
Display
Contents
The date/time information obtained from GPS signal is displayed in Greenwich
mean time (GMT). The last 4 digits are displayed.
(4)
Vehicle Sensors Screen
Vehicle signal
Display
Contents
REV/*1
REV signal ON/OFF state is displayed.
SPD/*2
SPD signal condition is displayed.
Sensor signal
Display
Contents
Gyro sensor/*3
Gyro sensor output condition is displayed (when the vehicle runs straight or is sta-
tionary, the voltage is approximately 2.5 V).
HINT:
Signals are updated once per second only when vehicle sensor signals are changed.
(5)
Parts Information Screen
Screen description
Display
Contents
Navigation Manufacturer/*1
Radio and navigation assy manufacturer is displayed.
Navigation Version No./*2
Radio and navigation assy version is displayed.
Disc Manufacturer/*3
Map disc manufacturer is displayed.
Disc Version No./*4
Map disc version is displayed.
I28246
DI–2198
–
DIAGNOSTICS
NAVIGATION SYSTEM
2392
(6)
Memory Copy/Paste Screen
HINT:
This function cannot be used.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст