Toyota Sequoia (2005). Manual — part 926
BO4RC–02
BO–140
–
BODY
REAR NO.1 SEAT (Separate Type)
3693
INSTALLATION
Installation is in the reverse order of removal (see page
).
BO4SH–01
H16778
Rear Seat Shoulder Belt Cover
Rear Seat Shoulder
Belt Guide
Headrest
Armrest
Seatback Pad
Rear Seat
Protector
No. 1 Reclining Cover
Seat Cushion Cover
Seat Cushion Pad
Seat Cushion Frame
Seatback Frame
Rear Seatback
Protector
Seatback Cover
Hinge
Cover
RH Rear Seat Lock
LH Rear Seat Lock
43 (430, 32)
Hinge Cover
No. 1 Fold Seat
Lock Control Cable
Fold Seat
Stopper Band
Seat Cushion
Under Cover
Rear Seat
Cushion Cover LH
Cushion
Seat Leg Cover
Rear Seat Cushion Hinge
Rear Seat Stay
Rear Seat
Cushion Hinge
Rear No. 1 Seat
Inner Belt
Seat Adjuster
Control Cable
Hinge
Cover
Hinge Cover
Rear Seat
Outer Belt
Rear No. 1 Seat Inner Adjuster
Seat Inner
Bracket
Rear Seat
Cushion Cover RH
37 (380, 27)
37 (380, 27)
N·m (kgf·cm, ft·lbf)
: Specified torque
Non–reusable part
Reclining Adjuster
Release Handle
No. 1 Reclining Cover
Rear No. 1
Seat Outer
Adjuster
42 (430, 31)
43 (440, 32)
42 (430, 31)
43 (440, 32)
42 (430, 31)
42 (430, 31)
Hog Ring
Hog Ring
–
BODY
REAR NO.1 SEAT (Split Type LH)
BO–141
3694
REAR NO.1 SEAT (Split Type LH)
COMPONENTS
BO4SI–01
BO–142
–
BODY
REAR NO.1 SEAT (Split Type LH)
3695
REMOVAL
REMOVE REAR NO.1 SEAT
(a)
Fold the seatback down.
(b)
Unlock the seat lock, and swing the whole seat up and forward.
(c)
Using a screwdriver, remove the seat leg covers.
HINT:
Tape the screwdriver tip before use.
(d)
Remove the 4 bolts and rear No.1 seat.
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
BO4SJ–01
H05304
H05321
–
BODY
REAR NO.1 SEAT (Split Type LH)
BO–143
3696
DISASSEMBLY
CAUTION:
Wear safety gloves, because the sharp edges and surfaces
of the seat frame may cause injury to the hands.
HINT:
A bolt without a torque specification is shown in the stan-
dard bolt chart (see page
Tape the screwdriver tip before using it to remove the
parts.
1.
REMOVE HEADREST
2.
REMOVE RECLINING ADJUSTER RELEASE HANDLE
3.
REMOVE NO. 1 RECLINING COVERS
(a)
Zip the seat cushion cover open.
(b)
Remove the 2 screws and 2 No. 1 reclining covers.
4.
REMOVE SEAT CUSHION UNDER COVER
(a)
Remove the 2 screws and 2 seat cushion under covers.
(b)
Remove the 10 screws and seat cushion under cover
sub–assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст