Toyota Sequoia (2005). Manual — part 880
–
BODY ELECTRICAL
WIRELESS DOOR LOCK CONTROL SYSTEM
BE–105
3509
Start registration of recognition code
The vehicle should be in the following conditions.
Any door is OPEN. (Other doors are CLOSED)
Insert the key into the ignition key cylinder, then pull it out.
Press the door lock control switch (for manual operation) 5 times to
LOCK/UNLOCK at approx. 1 sec. interval.
1st time
2nd time
3rd time
4th time
5th time
LOCK
OFF
UNLOCK
Approx.
1 sec.
Approx.
1 sec.
Close the DRIVER’S door, then open the DRIVER’S door.
Press the door lock control switch again (for manual operation) 5 times to
LOCK/UNLOCK at approx. 1 sec. interval.
1st time
2nd time
3rd time
4th time
5th time
LOCK
OFF
UNLOCK
Approx.
1 sec.
Approx.
1 sec.
Insert the key into the ignition key cylinder.
Within
40 secs.
BE–106
–
BODY ELECTRICAL
WIRELESS DOOR LOCK CONTROL SYSTEM
3510
Within
3 secs.
Turn the ignition switch from ON to LOCK at approx. 1 sec. interval 1 to 5 times to select the mode.
Pull out the key plate from the ignition key cylinder.
When add mode or rewrite mode
is selected.
When confirmation
mode is selected.
ON
ON
ON
OFF
OFF
OFF
Approx.
1 sec.
Approx.
1 sec.
Approx. 1 sec.
Approx.
1 sec.
Approx.
1 sec.
Add mode
Rewrite mode
Confirmation mode
ON – OFF change occurs 1 time
ON – OFF change occurs 2 times
ON – OFF change occurs 3 times
MPX body ECU automatically performs
the LOCK–UNLOCK operation once
or twice at 1 sec. interval to inform the
operator that either the add mode or
rewrite mode has been selected.
LOCK–UNLOCK occurs once
LOCK–UNLOCK occurs twice
Indicates that add mode has been selected.
Indicates that rewrite mode has been
selected.
1 sec.
LOCK
1 sec. 1 sec.
LOCK
UNLOCK
UNLOCK
LOCK
2 secs. 2 secs.
UNLOCK
MPX body ECU automatically performs the
LOCK–UNLOCK operation 1 to 4 times at
2 sec. interval to inform the operator of
the number of the registered codes.
HINT:
When the number of the registered code
is 0, the operation is automatically
performed 5 times.
Example:
When the operation is performed twice, it
directs that 2 types of recognition code
have been registered.
1st time 2nd time
Registration of recognition code (Confirmation
mode and prohibition mode) is completed.
ON
OFF
Approx.
1 sec.
Approx.
1 sec.
Prohibition mode
ON – OFF change occurs 5 times
When prohibition
mode is selected.
Within
40secs.
–
BODY ELECTRICAL
WIRELESS DOOR LOCK CONTROL SYSTEM
BE–107
3511
MPX body performs LOCK–UNLOCK operation 5 times at a 1 sec.
interval to inform the operator that prohibition mode has been selected.
Press again any switches on the transmitter for more than 1 sec.
MPX body ECU automatically performs LOCK–UNLOCK operation once or
twice at a 1 sec. interval to inform the operator that the receiver has received the
signal from the transmitter.
LOCK–UNLOCK occurs once
LOCK–UNLOCK occurs twice
Registration of recognition code is completed.
Registration of recognition code has not been completed.
Recognition code received first time and second time did not match.
Proceed to continue registration
If even one of the following conditions is satisfied, registration of recognition
codes is completed.
40 secs. elapse since the MPX body ECU response.
The driver’s door is closed.
The key plate is inserted in the ignition key cylinder.
4 types of recognition codes are registration at one time.
Registration of recognition codes (add mode or rewrite mode) is completed.
Within
3 secs.
Within
40 secs.
UNLOCK
Approx.
1 sec.
Approx.
1 sec.
When prohibition
mode is selected.
Press the lock and unlock switches on the transmitter simultaneously within 1.5 sec.
If LOCK–UNLOCK operation can not be performed at all, the mode returns to the
normal mode, then start with ”Start registration of recognition code”.
Proceed to finish registration
Within 40 secs.
Within
3 secs.
LOCK
BE17F–08
I28418
Instrument Panel J/B
PWR SEAT Fuse
ECU–IG Fuse
Power Seat Motor
(Reclining)
Lumbar Support Control Motor
Power Seat Motor (Slide)
Power Seat Motor (Slide)
Power Seat Motor (Front Vertical)
Power Seat Motor (Rear Lifter)
Power Seat Switch
Power Seat Motor
(Reclining)
Lumbar Support
Control Switch
BE–108
–
BODY ELECTRICAL
POWER SEAT CONTROL SYSTEM
3512
POWER SEAT CONTROL SYSTEM
LOCATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст