Toyota Sequoia (2005). Manual — part 712
B07233
B07234
SST
3/4 Turn
B07235
Front
–
LUBRICATION
OIL AND FILTER
LU–3
2837
(d)
Tighten the oil filter by hand until the rubber gasket con-
tacts the seat of the filter mounting.
(e)
Using SST, give it an additional 3/4 turn to seat the filter.
SST
09228–07501
4.
REFILL WITH ENGINE OIL
(a)
Clean and install the oil drain plug with a new gasket.
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
(b)
Fill with fresh engine oil.
Capacity:
Drain and refill
w/ Oil filter change
w/o Oil filter change
6.2 liters (6.6 Us qts, 5.5 Imp. qts)
5.7 liters (6.0 Us qts, 5.0 Imp. qts)
Dry fill
7.1 liters (7.5 Us qts, 6.2 Imp. qts)
(c)
Reinstall the oil filler cap.
HINT:
Install the oil filler cap facing the direction as shown in the il-
lustration.
5.
START ENGINE AND CHECK FOR ENGINE OIL
LEAKS
6.
RECHECK ENGINE OIL LEVEL
7.
w/ Oil filter change:
REINSTALL ENGINE UNDER COVER
LU08P–10
B17476
RH No.3 Timing Belt Cover
LH No.3 Timing Belt Cover
No.2 Timing Belt Cover
Camshaft Position
Sensor Connector
Engine Wire
Drive Belt Idler Pulley
Timing Belt
Fan Bracket
N·m (kgf·cm, ft·lbf) : Specified torque
Oil Cooler Pipe
Timing Belt Tensioner
Dust Boot
Cover Plate
32 (330, 24)
Water Bypass
Hose
Grommet
245 (2,500, 181)
39 (400,29)
16 (160, 12)
16 (160, 12)
LU–4
–
LUBRICATION
OIL PUMP
2838
OIL PUMP
COMPONENTS
B17481
Generator
Drive Belt Tensioner
No.1 Timing Belt Cover
Crankshaft Pulley
Timing Belt
Timing Belt Guide
(Crankshaft Angle Sensor Plate)
No.1 Idler Pulley
Crankshaft Timing Pulley
Plate Washer
No.2 Idler Pulley
Timing Belt Cover Spacer
Gasket
Precoated part
N·m (kgf·cm, ft·lbf) : Specified torque
39 (400, 29)
Generator Wire
34.5 (350, 25)
34.5 (350, 25)
39 (400, 29)
15.5 (158, 11)
–
LUBRICATION
OIL PUMP
LU–5
2839
B17482
Oil Pump
Crankshaft
Position
Sensor
Connector
Crankshaft
Position
Sensor
Oil Filter, Oil Cooler and
Filter Bracket Assembly
Oil Cooler Hose
Clamp
Oil Strainer
Oil Dipstick
Guide and
Dipstick
O–Ring
Gasket
No.1 Oil Pan
No.2 Oil Pan
Oil Pan Baffle Plate
Clamp
Drain Plug
x 24
N·m (kgf·cm, ft·lbf) : Specified torque
Non–reusable part
Gasket
30.5 (310, 22)
O–Ring
15.5 (160, 11)
18 (185,13)
Vinyl
Tape
Wire
Clamp
Oil Pressure Switch
Connector
15.5 (160, 11)
Gasket
39 (400, 29)
x 8
28 (290, 21)
7.5 (76, 66 in.·lbf)
28 (290, 21)
7.5 (76, 66 in.·lbf)
7.5 (76, 66 in.·lbf)
7.5 (76, 66 in.·lbf)
7.5 (76, 66 in.·lbf)
LU–6
–
LUBRICATION
OIL PUMP
2840
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст