Toyota Sequoia (2005). Manual — part 787
SA175–05
F05063
SST
SST
F14312
SST
SST
–
SUSPENSION AND AXLE
COIL SPRING AND REAR SHOCK ABSORBER
SA–141
3137
REPLACEMENT
1.
Normal Type:
REMOVE BUSHING
Using SST and a press, remove the bushing.
SST
09710–14013 (09710–00061),
09710–28012 (09710–07031),
09950–70010 (09951–07100)
2.
Normal Type:
INSTALL BUSHING
Using SST and a press, install a new bushing.
SST
09710–14013 (09710–00061),
09710–28012 (09710–07031),
09950–70010 (09951–07100)
SA176–04
SA–142
–
SUSPENSION AND AXLE
COIL SPRING AND REAR SHOCK ABSORBER
3138
INSTALLATION
Installation is in the reverse order of removal (See page
).
SA177–04
F14296
Lateral Control Rod
N·m (kgf·cm, ft·lbf) : Specified torque
130 (1,326, 96)
140 (1,428, 103)
Non–reusable part
–
SUSPENSION AND AXLE
REAR LATERAL CONTROL ROD
SA–143
3139
REAR LATERAL CONTROL ROD
COMPONENTS
SA178–04
F14297
A
B
SA–144
–
SUSPENSION AND AXLE
REAR LATERAL CONTROL ROD
3140
REMOVAL
1.
SUPPORT REAR AXLE HOUSING WITH JACK
2.
REMOVE LATERAL CONTROL ROD
Remove the 2 bolts, nut, washer and lateral control rod.
Torque:
A 140 N·m (1,428 kgf·cm, 103 ft·lbf)
B 130 N·m (1,326 kgf·cm, 96 ft·lbf)
HINT:
At the time of installation, please refer to the following items.
Replace the used nut with a new one.
After stabilizing the suspension, torque the nut and bolt.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст