Toyota Sequoia (2005). Manual — part 962
I21438
AC3I3–02
AC–110
–
AIR CONDITIONING
REAR A/C CONTROL ASSEMBLY (for Rear A/C)
3837
REMOVAL
REMOVE HEATER CONTROL ASSEMBLY
Using a screwdriver, release the 2 claws and pull out the control
switch assembly, then disconnect the connector.
HINT:
Tape the screwdriver tip before use.
I21440
AC3I4–02
I21442
I21443
I22617
–
AIR CONDITIONING
REAR A/C CONTROL ASSEMBLY (for Rear A/C)
AC–111
3838
DISASSEMBLY
REMOVE A/C AMPLIFIER
(a)
Remove the 2 screws and heater control switch.
(b)
Remove the 4 screws, A/C amplifier and PC board.
(c)
Remove the 3 bulbs from the PC board.
(d)
Remove the bulb from the A/C amplifier.
I07872
AC3I5–02
AC–112
–
AIR CONDITIONING
REAR A/C CONTROL ASSEMBLY (for Rear A/C)
3839
INSPECTION
INSPECT BULB
Set the tester as shown in the illustration to check for continuity.
If continuity exists, replace the heater control.
If no continuity exists, replace the bulb.
AC3I6–01
–
AIR CONDITIONING
REAR A/C CONTROL ASSEMBLY (for Rear A/C)
AC–113
3840
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page
).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст