Toyota Camry Hybrid (2022 year). Manual in english — page 9
142
2. Instrument cluster
Audio system screen
Multi-information display
Meter control switches
(
The energy monitor can be used to check the vehicle drive status,
hybrid system operation status and energy regeneration status.
■
Display procedure
Multi-information display
Operate the meter control switches on the steering wheel to select
the energy monitor display.
Audio or Audio Plus (vehicles without Data Communication Mod-
ule)
Press the “MENU” button.
Select “Info” on the “Menu” screen.
If a screen other than “Energy monitor” is displayed, select “Energy”.
Audio or Audio Plus (vehicles with Data Communication Module)/
Premium Audio
Press the “MENU” button.
Select “Info” on the “Menu” screen.
Select “ECO” on the “Information” screen.
If a screen other than “Energy monitor” is displayed, select “Energy”.
Energy monitor/consumption screen
The state of the hybrid system can be viewed on the multi-infor-
mation display and navigation or multimedia system screen.
The energy monitor and fuel consumption screen can be dis-
played on the “Home” screen of the multimedia screen.
System components
1
2
3
Energy monitor
1
2
1
2
3
143
2. Instrument cluster
2
Instrument cluster
■
Reading the display
The arrows will appear in accordance with the energy flow.
When there is no energy flow, arrows will not be displayed.
The color of the arrows will change as follows.
Green: When the hybrid battery (traction battery) is regenerated or
charged.
Yellow: When the hybrid battery (traction battery) is in use.
Red: When the gasoline engine is in use.
Multi-information display
The image shows the arrows as an example. The actual display will
vary depending on conditions.
Gasoline engine
Hybrid battery (traction battery)
Front tires
Audio system screen
Gasoline engine
Electric
motor
(traction
motor)
Hybrid battery (traction bat-
tery)
Front tires
The image shows the arrows as an example. The actual display will
vary depending on conditions.
Vehicles with 4.2-inch display:
Vehicles with 7-inch display:
1
2
3
1
2
3
4
144
2. Instrument cluster
Audio system screen (“Home” screen)
Gasoline engine
Hybrid battery (traction bat-
tery)
Front tires
The image shows the arrows as an example. The actual display will
vary depending on conditions.
■
Remaining charge amount warning of hybrid battery (traction battery)
●
The buzzer sounds intermittently when the hybrid battery (traction battery)
remains without charging while the shift lever is in N, or the remaining
charge amount drops below a certain level. If the remaining charge amount
drops further, the buzzer sounds continuously.
●
When a warning message is shown on the multi-information display and the
buzzer sounds, follow the instructions displayed on the screen to perform
troubleshooting.
1
2
3
145
2. Instrument cluster
2
Instrument cluster
■
Trip information
Audio (vehicles without Data Communication Module) or Audio
Plus (vehicles without Data Communication Module)
Press the “MENU” button.
Select “Info” on the “Menu” screen.
If the “Energy Monitor” or “History” screen is displayed, select “Trip
Information”.
Audio (vehicles with Data Communication Module), Audio Plus
(vehicles with Data Communication Module) and Premium Audio
Press the “MENU” button.
Select “Info” on the “Menu” screen.
Select “ECO” on the “Information” screen.
If “Energy Monitor” or “History” screen is displayed, select “Trip Informa-
tion”.
Resetting the consumption
data
Displays the average vehicle
speed since the hybrid sys-
tem was started
Displays the elapsed time
since the hybrid system was
started
Fuel consumption in the past 15 minutes
Cruising range
Regenerated energy in the past 15 minutes
One symbol indicates 30 Wh. Up to 5 symbols are shown.
The image is example only, and may vary slightly from actual condi-
tions.
Current fuel consumption
Fuel consumption screen
1
2
1
2
3
1
2
3
4
5
6
7
146
2. Instrument cluster
■
History
Audio (vehicles without Data Communication Module) or Audio
Plus (vehicles without Data Communication Module)
Press the “MENU” button.
Select “Info” on the “Menu” screen.
If the “Energy Monitor” or “Trip Information” screen is displayed, select
“History”.
Audio (vehicles with Data Communication Module), Audio Plus
(vehicles with Data Communication Module) and Premium Audio
Press the “MENU” button.
Select “Info” on the “Menu” screen.
Select “ECO” on the “Information” screen.
If “Energy Monitor” or “Trip Information” screen is displayed, select “His-
tory”.
Resetting the past record
data
Best past fuel consumption
Current fuel economy
Previous fuel consumption
record
Audio or Audio Plus
Displays the daily average fuel consumption. (Instead of the date,
“Trip 1” through “Trip 5” will be displayed.)
Premium Audio
Displays the daily average fuel consumption.
Updating the average fuel consumption data
Displays a maximum of five past record of the average fuel consump-
tion.
The image is example only, and may vary slightly from actual condi-
tions.
1
2
1
2
3
1
2
3
4
5
147
2. Instrument cluster
2
Instrument cluster
■
Resetting the consumption data
Selecting “Clear” on the “Trip Information” screen will reset the fuel consump-
tion and the regenerated energy for the past 15 minutes. Selecting “Clear” on
the “History” screen will reset the past records and best past fuel consump-
tion. Selecting “Yes” on the following screen will confirm resetting of all the
data.
148
2. Instrument cluster
149
3
Operation of
each component
Doors . . . . . . . . 154
Trunk. . . . . . . . . 160
Smart key system . . . . 164
Front seats . . . . . . 171
Rear seats. . . . . . . 173
Head restraints. . . . .. 175
Steering wheel . . . . .. 177
Inside rear view mirror . .. 179
Outside rear view
150
3-1. Key information
The following keys are provided with the vehicle.
Electronic keys
• Operating the smart key system
(
• Operating the wireless remote
control function (
Mechanical keys
Key number plate
Locks all the doors (
Unlocks all the doors (
Pressing the button unlocks the
driver’s door. Pressing the button
again within 3 seconds unlocks the
other doors.
Opens the windows
*
1
and the
moon roof
*
1, 2
(
Opens the trunk (
Sounds the alarm (
*
1
: This setting must be customized at your Toyota dealer.
*
2
: If equipped
Keys
The keys
1
2
3
Wireless remote control
1
2
3
4
5
151
3-1. Key information
3
Opera
tion of e
ach compon
ent
To take out the mechanical key,
slide the release lever and take
the key out.
The mechanical key can only be
inserted in one direction, as the
key only has grooves on one side.
If the key cannot be inserted in a
lock cylinder, turn it over and re-
attempt to insert it.
After using the mechanical key, store it in the electronic key. Carry the
mechanical key together with the electronic key. If the electronic key bat-
tery is depleted or the entry function does not operate properly, you will
need the mechanical key. (
■
Panic mode
■
If you lose your keys
New genuine keys can be made by your Toyota dealer using the other
mechanical key and the key number stamped on your key number plate.
Keep the plate in a safe place such as your wallet, not in the vehicle.
Using the mechanical key
When
is pressed for longer than
about one second, an alarm will sound
intermittently and the vehicle lights will
flash to deter any person from trying to
break into or damage your vehicle.
To stop the alarm, press any button on the
electronic key.
152
3-1. Key information
■
When riding in an aircraft
When bringing an electronic key onto an aircraft, make sure you do not press
any button on the electronic key while inside the aircraft cabin. If you are car-
rying an electronic key in your bag etc., ensure that the buttons are not likely
to be pressed accidentally. Pressing a button may cause the electronic key to
emit radio waves that could interfere with the operation of the aircraft.
■
Conditions affecting operation
■
Electronic key battery depletion
●
The standard battery life is 1 to 2 years.
●
If the battery becomes low, an alarm will sound in the cabin when the hybrid
system stops.
●
As the electronic key always receives radio waves, the battery will become
depleted even if the electronic key is not used. The following symptoms indi-
cate that the electronic key battery may be depleted. Replace the battery
when necessary. (
• The smart key system or the wireless remote control does not operate.
• The detection area becomes smaller.
• The LED indicator on the key surface does not turn on.
●
To reduce key battery depletion when the electronic key is to not be used for
long periods of time, set the electronic key to the battery-saving mode.
(
●
To avoid serious deterioration, do not leave the electronic key within 3 ft. (1
m) of the following electrical appliances that produce a magnetic field:
• TVs
• Personal computers
• Cellular phones, cordless phones and battery chargers
• Recharging cellular phones or cordless phones
• Table lamps
• Induction cookers
■
Replacing the battery
■
Confirmation of the registered key number
The number of keys already registered to the vehicle can be confirmed. Ask
your Toyota dealer for details.
■
If a wrong key is used
The key cylinder rotates freely to isolate inside mechanism.
153
3-1. Key information
3
Opera
tion of e
ach compon
ent
NOTICE
■
To prevent key damage
●
Do not drop the keys, subject them to strong shocks or bend them.
●
Do not expose the keys to high temperatures for long periods of time.
●
Do not get the keys wet or wash them in an ultrasonic washer etc.
●
Do not attach metallic or magnetic materials to the keys or place the keys
close to such materials.
●
Do not disassemble the keys.
●
Do not attach a sticker or anything else to the surface of the electronic key.
●
Do not place the keys near objects that produce magnetic fields, such as
TVs, audio systems and induction cookers, or medical electrical equip-
ment, such as low-frequency therapy equipment.
■
Carrying the electronic key on your person
Carry the electronic key 3.9 in. (10 cm) or more away from electric appli-
ances that are turned on. Radio waves emitted from electric appliances
within 3.9 in. (10 cm) of the electronic key may interfere with the key, caus-
ing the key to not function properly.
■
In case of a smart key system malfunction or other key-related prob-
lems
Take your vehicle with all the electronic keys provided with your vehicle to
your Toyota dealer.
■
When an electronic key is lost
If the electronic key remains lost, the risk of vehicle theft increases signifi-
cantly. Visit your Toyota dealer immediately with all remaining electronic
keys that were provided with your vehicle.
154
3-2. Opening, closing and locking the doors
◆
Smart key system
Carry the electronic key to enable this function.
Grip the driver’s door handle
to unlock the door. Holding
the driver’s door handle for
approximately 2 seconds
unlocks all the doors. Grip
the front passenger’s door
handle to unlock all the
doors.
*
Make sure to touch the sensor on the back of the handle.
The doors cannot be unlocked for 3 seconds after the doors are locked.
*
: The door unlock settings can be changed. (
Touch the lock sensor (the indentation on the side of the door
handle) to lock the doors.
Check that the door is securely locked.
◆
Wireless remote control
Locks all the doors
Check that the door is securely
locked.
Unlocks all the doors
Pressing the button unlocks the
driver’s door. Pressing the but-
ton again within 3 seconds
unlocks the other doors.
Press and hold to open the win-
dows
*
1
and the moon roof.
*
1, 2
(
*
1
: This setting must be customized at your Toyota dealer.
*
2
: If equipped
Doors
Unlocking and locking the doors from the outside
1
2
1
2
155
3-2. Opening, closing and locking the doors
3
Opera
tion of e
ach compon
ent
■
Operation signals
Doors:
A buzzer sounds and the emergency flashers flash to indicate that the doors
have been locked/unlocked. (Locked: Once; Unlocked: Twice)
Windows and moon roof:
A buzzer sounds to indicate that the windows and moon roof are opening.
■
Security feature
If a door is not opened within approximately 60 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.
■
When the door cannot be locked by the lock sensor on the surface of the
door handle
■
Door lock buzzer
If an attempt to lock the doors using the smart key system is made when a
door is not fully closed, a buzzer sounds continuously. Fully close the door to
stop the buzzer, and lock the vehicle once more.
■
Alarm
Locking the doors will set the alarm system. (
■
If the smart key system or the wireless remote control does not operate
properly
Use the mechanical key to lock and unlock the doors. (
Replace the key battery with a new one if it is depleted. (
When the door cannot be locked even if
the lock sensor on the surface of the door
handle is touched by a finger, touch the
lock sensor with the palm.
When gloves are being worn, remove the
gloves.
156
3-2. Opening, closing and locking the doors
◆
Door lock switches
Locks all the doors
Unlocks all the doors
◆
Inside lock buttons
Locks the door
Unlocks the door
The front doors can be opened
by pulling the inside handle
even if the lock buttons are in
the lock position.
Move the inside lock button to the lock position.
Close the door.
The door cannot be locked if the power switch is in ACCESSORY or
ON mode, or the electronic key is left inside the vehicle.
The key may not be detected correctly and the door may be locked.
Unlocking and locking the doors from the inside
1
2
1
2
Locking the front doors from the outside without a key
1
2
157
3-2. Opening, closing and locking the doors
3
Opera
tion of e
ach compon
ent
The door cannot be opened from
inside the vehicle when the lock is
set.
Unlock
Lock
These locks can be set to prevent
children from opening the rear
doors. Push down on each rear
door switch to lock both rear doors.
The following functions can be set or cancelled:
For instructions on customizing, refer to P. 571.
Rear door child-protector lock
1
2
Automatic door locking and unlocking systems
Function
Operation
Speed linked door locking function
All doors are automatically locked
when vehicle speed is approxi-
mately 12 mph (20 km/h) or higher.
Shift position linked door locking
function
All doors are automatically locked
when shifting the shift lever out of P.
Shift position linked door unlocking
function
All doors are automatically unlocked
when shifting the shift lever to P.
Driver’s door linked door unlocking
function
All doors are automatically unlocked
when driver’s door is opened.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст