Toyota Avalon Hybrid (2019 year). Instruction — part 6
81
1-3. Theft deterrent system
1
For safet
y and s
ecurity
■
Certifications for the immobilizer system
For vehicles sold in the U.S.A.
For vehicles sold in Canada
WARNING
■
Certifications for the engine immobilizer system
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTICE
■
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.
82
1-3. Theft deterrent system
The alarm uses light and sound to give an alert when an intrusion is
detected.
The alarm is triggered in the following situations when the alarm is
set:
● A locked door is unlocked or opened in any way other than using
the entry function, wireless remote control or mechanical key.
(The doors will lock again automatically.)
● The trunk is opened in any way other than using the entry function
or wireless remote control.
● The hood is opened.
Close the doors, trunk and hood,
and lock all the doors. The system
will be set automatically after 30
seconds.
The indicator light changes from
being on to flashing when the sys-
tem is set.
Do one of the following to deactivate or stop the alarm:
● Unlock the doors.
● Open the trunk using the entry function or wireless remote control.
● Turn the power switch to ACCESSORY or ON mode, or start the
hybrid system. (The alarm will be deactivated or stopped after a few
seconds.)
Alarm
The alarm
Setting the alarm system
Deactivating or stopping the alarm
83
1-3. Theft deterrent system
1
For safet
y and s
ecurity
■
System maintenance
The vehicle has a maintenance-free type alarm system.
■
Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of
the following:
●
Nobody is in the vehicle.
●
The windows and moon roof (if equipped) are closed before the alarm is set.
●
No valuables or other personal items are left in the vehicle.
■
Triggering of the alarm
The alarm may be triggered in the following situations:
(Stopping the alarm deactivates the alarm system.)
●
The trunk is opened using the mechani-
cal key.
●
A person inside the vehicle opens a door
or the trunk or hood, or unlocks the vehi-
cle.
●
The 12-volt battery is recharged or
replaced when the vehicle is locked.
(
84
1-3. Theft deterrent system
■
Alarm-operated door lock
In the following cases, depending on the situation, the door may automatically
lock to prevent improper entry into the vehicle:
●
When a person remaining in the vehicle unlocks the door and the alarm is
activated.
●
While the alarm is activated, a person remaining in the vehicle unlocks the
door.
●
When recharging or replacing the 12-volt battery
NOTICE
■
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper
operation of the system cannot be guaranteed.
85
Instrument cluster
2
Instrument cluster
Warning lights and
Gauges and meters . . . 92
Multi-information
86
2. Instrument cluster
Warning lights and indicators
The warning lights and indicators on the instrument cluster, cen-
ter panel and outside rear view mirrors inform the driver of the
status of the vehicle’s various systems.
For the purpose of explanation, the following illustrations dis-
play all warning lights and indicators illuminated.
87
2. Instrument cluster
2
Instrument cluster
Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.
Warning lights
*
1
(Red)
Brake system warning
light (
Parking brake indicator
(
*
1
(Yellow)
Brake system warning
light (
*
1, 3
Brake hold operated
indicator (
*
2
High coolant tempera-
ture warning light
(
*
1
(Red/yellow)
Electric power steering
system warning light
(
*
2
Charging system
warning light (
*
1, 4
PCS warning light
(
*
2
Low engine oil pressure
warning light (
*
1, 3
(if equipped)
ICS OFF indicator
(
*
1
Malfunction indicator
lamp (
*
2
(Amber)
LDA indicator (
*
1
SRS warning light
(
*
1
Slip indicator (
*
1
ABS warning light
(
Low fuel level warning
light (
*
2
Brake Override System/
Drive-Start Control/Intel-
ligent Clearance Sonar
(if equipped) warning
light (
Driver’s and front
passenger’s seat belt
reminder light
(
88
2. Instrument cluster
*
1
: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or turn off. Have the vehicle
inspected by your Toyota dealer.
*
2
: This light illuminates on the multi-information display.
*
3
: This light flashes to indicate a malfunction.
*
4
: This light flashes or illuminates to indicate a malfunction.
*
5
: This light illuminates on the center panel.
*
5
Rear passengers’ seat
belt reminder lights
(
*
1
Tire pressure warning
light (
*
1
Master warning light
(
89
2. Instrument cluster
2
Instrument cluster
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Turn signal indicator
(
*
2
Radar cruise control
indicator (
Headlight indicator
(
*
2
Cruise control “SET”
indicator
(
Headlight high beam
indicator (
*
1, 3
PCS warning light
(
*
2
Automatic High Beam
indicator (
*
1, 3
(if equipped)
ICS OFF indicator
(
*
2
AGC (Auto Glide Con-
trol) indicator (
*
2
(White)
LDA indicator (
Parking brake indicator
(
*
2
(Green)
LDA indicator (
*
1
Brake hold operated
indicator (
*
2, 4
(Amber)
LDA indicator (
*
1
Brake hold standby
indicator (
*
1, 4
Slip indicator (
*
2
Cruise control indicator
(
*
1, 3
VSC OFF indicator
(
90
2. Instrument cluster
*
2
“BSM” indicator
(
*
2
“SPORT” indicator
(
*
2
“RCTA” indicator
(
*
2
“ECO MODE” indicator
(
*
5, 6
BSM (Blind Spot Moni-
tor) outside rear view
mirror indicators
(
*
2
EV drive mode indicator
(
*
1, 7
“AIR BAG
ON/OFF”
indicator
(
*
2
EV indicator (
*
7
Security indicator
(
“READY” indicator
(
*
2
(if equipped)
Intuitive parking assist
indicator (
*
2, 8
Low outside tempera-
ture indicator (
*
2
Smart key system indi-
cator (
91
2. Instrument cluster
2
Instrument cluster
*
1
: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or turn off. Have the vehicle
inspected by your Toyota dealer.
*
2
: This light illuminates on the multi-information display.
*
3
: This light turns on when the system is off.
*
4
: This light flashes to indicate that the system is operating.
*
5
: These indicators will illuminate in the following situations to indicate that
the system initial check is being performed:
• When the BSM function or RCTA function is enabled and the power
switch is turned to ON mode.
• When the power switch is ON mode and the BSM function is enabled.
• When the power switch is ON mode and the RCTA function is enabled.
(At this time, a buzzer will also sound).
The indicators will turn off after a few seconds. If the indicators do not
illuminate or turn off, or if a buzzer does not sound when the RCTA func-
tion is enabled, the system may be malfunctioning. Have the vehicle
inspected by your Toyota dealer.
*
6
: This light illuminates on the outside rear view mirrors.
*
7
: This light illuminates on the center panel.
*
8
: When the outside temperature is approximately 37°F (3°C) or lower, this
indicator will flash for approximately 10 seconds, then stay on.
WARNING
■
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning lights not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by your Toyota dealer
immediately if this occurs.
92
2. Instrument cluster
The units used on the meters may differ depending on the target region.
Hybrid System Indicator
Displays hybrid system output or regeneration level (
Shift position (
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to
122°F (50°C). Low outside temperature indicator comes on when the
ambient temperature is 37°F (3°C) or lower.
Multi-information display
Presents the driver with a variety of vehicle data (
Displays warning messages in case of a malfunction (
Speedometer
Fuel gauge
Odometer and trip meter
P. 111)
Engine coolant temperature gauge
Displays the engine coolant temperature
Gauges and meters
1
2
3
4
5
6
7
8
93
2. Instrument cluster
2
Instrument cluster
The brightness of the instrument panel lights can be adjusted.
The brightness of some of the interior lights will be changed when the
brightness of the instrument panel lights is adjusted. (→P. 346)
Darker
Brighter
• The brightness of the instrument
panel lights can be adjusted
individually for day mode and
night mode
*
.
• If the brightness is adjusted
when the surroundings are
bright and the tail lights are on
(day mode brightness adjust-
ment), the brightness level of
night mode will be adjusted at
the same time.
*
: Day mode and night mode:
Instrument panel light control
1
2
94
2. Instrument cluster
■
The meters and display illuminate when
The power switch is in ON mode.
■
Brightness of the meters (day mode and night mode)
●
The brightness of the meters is changed between day mode and night
mode.
• Day mode: When the tail lights are off or when the tail lights are on but
the surrounding area is bright
• Night mode: When the tail lights are on and the surrounding area is dark
●
When in night mode, the brightness will be reduced slightly unless the
meters are set to the maximum brightness level.
■
Hybrid System Indicator
Shows that an Eco-friendly driving range is being exceeded (during full
power driving etc.)
●
By keeping the indicator needle within Eco area, more Eco-friendly driving
can be achieved.
●
Charge area indicates “regeneration”
*
status. Regenerated energy will be
used to charge the battery.
*
: When used in this manual, “regeneration” refers to the conversion of
energy created by the movement of the vehicle into electrical energy.
The Hybrid System Indicator will not operate in the following situations:
●
The “READY” indicator is not illuminated.
●
The shift lever is in any position other than D.
Charge area
Shows regenerative charging.
Hybrid Eco area
Shows that gasoline engine power is
not being used very often.
The gasoline engine will automatically
stop and restart under various condi-
tions.
Eco area
Shows that the vehicle is being driven in
an Eco-friendly manner.
Power area
1
2
3
4
95
2. Instrument cluster
2
Instrument cluster
■
Engine speed
On hybrid vehicles, engine speed is precisely controlled in order to help
improve fuel efficiency and reduce exhaust emissions etc.
There are times when the engine speed that is displayed may differ even
when vehicle operation and driving conditions are the same.
■
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change:
●
When stopped, or driving at low speeds (less than 16 mph [25 km/h])
●
When the outside temperature has changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
●
When “
” or “E” is displayed, the system may be malfunctioning.
Take your vehicle to your Toyota dealer.
NOTICE
■
To prevent damage to the engine and its components
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (
96
2. Instrument cluster
The multi-information display presents the driver with a variety of driv-
ing-related data, such as the current outside temperature. The multi-
information display can also be used to change the display settings
and other settings.
Indicators (
Driving assist system status display area
Displays the operational status of the following systems:
• Dynamic radar cruise control with full-speed range (
• LDA (Lane Departure Alert with steering control) (
Speed limit display (vehicles with a navigation system) (U.S.A.
only)
Speedometer
The speedometer display can be enabled/disabled in
on the multi-
information display. (
When
is selected, the speedometer may be displayed in the content
display area.
Content display area
A variety of information can be displayed by selecting a menu icon. Addi-
tionally, warning or suggestion/advice pop-up displays will be displayed in
some situations.
• Menu icon content (
• Suggestion function (
• Warning message (
Multi-information display
Summary of functions
1
2
3
4
5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст