Toyota Highlander Hybrid (2022 year). Manual in english — page 7
109
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
HUD (Head-up display) (if
equipped) (
Press
to enable/disable the
head-up display.
• HUD (Head-up display) on/off
Select to enable/disable the
head-up display.
Press and hold
to change the
settings of the following items:
• “HUD Brightness/Position”
Select to adjust the brightness/posi-
tion of the head-up display.
• “HUD Driving Support”
Select to change the displayed
head-up display driving support
item.
• “HUD Rotation”
Select to adjust the angle of the
head-up display.
RSA (Road Sign Assist) (if
equipped) (
Press
to enable/disable the
Road Sign Assist.
• RSA (Road Sign Assist) on/off
Select to enable/disable the Road
Sign Assist.
Press and hold
to change the
settings of the following items:
• “Notification Method”
Select to change each notification
method used to notify the driver
when the system recognizes
excess speed and no-entry sign.
• “Notification Level”
Select to change each notification
level used to notify the driver when
the system recognizes a speed limit
sign.
■
Vehicle settings
Press and hold
to change
the settings of the following
items:
PBD (Power Back Door)
(
• “System Settings”
Select to enable/disable the power
back door system.
• “Kick Sensor”
*
Select to enable/disable the kick
sensor.
• “Opening Adjustment”
Select the open position when
power back door is fully open.
• “Volume”
Select to set the volume of the
buzzer which sounds when the
power back door system operates.
*
: Vehicles with a hands free power
back door
“TPWS” (Tire Pressure Warn-
ing System) (
• “Set Pressure” (tire pressure
warning system initialization)
Select to initialize the tire pressure
warning system.
• “Change Wheel” (register tire
pressure warning system sensor
ID codes)
Select to register the ID codes of
the tire pressure sensors to the tire
pressure warning system.
“Rear Seat Reminder”
(
110
2-1. Instrument cluster
Select to enable/disable the rear
seat reminder.
“Scheduled Maintenance”
(
Select to reset the scheduled main-
tenance information (maintenance
required message and distance
until maintenance necessary) after
all maintenance is performed.
■
Meter settings
Press and hold
to change
the settings of the following
items:
Language
Select to change the language dis-
played.
Units
Select to change the units of mea-
sure displayed.
EV indicator (
Select to enable/disable the EV
indicator.
Speedometer display (digital
speed)
Select to enable/disable the speed-
ometer display.
Gadget content
Select to turn the display of a gad-
get.
Fuel economy type
Select to change the average fuel
consumption display and an item to
be displayed as gadget.
Pop-up display
Select to enable/disable pop-up
displays for each relevant system.
Multi-information display off
Displays a blank screen.
Default setting
Select to reset the meter display
settings to the default setting.
■
Vehicle functions and set-
tings that can be changed
■
Background color of the indica-
tor/shift position display area
The background color of the indica-
tor/shift position display area is
changed according to the driving
mode as follows (
●
Eco drive mode: Blue
●
Sport mode: Red
■
Suspension of the settings dis-
play
●
Some settings cannot be changed
while driving. When changing set-
tings, park the vehicle in a safe
place.
●
If a warning message is displayed,
operation of the settings display
will be suspended.
■
Pop-up displays
Depending on the pop-up display,
the currently displayed item in the
message display area may be tem-
porarily not displayed. The item will
be displayed after the pop-up dis-
play is no longer displayed.
111
2-1. Instrument cluster
2
Vehicle
s
ta
tu
s information an
d in
dicat
or
s
Select to display warning mes-
sages and measures to be
taken if a malfunction is
detected. (
Displays suggestions to the
driver in the following situations.
To select a response to a dis-
played suggestion, use the
meter control switches.
■
Suggestion to turn off the
headlights
If the headlights are left on for a
certain amount of time after the
power switch has been turned
off, if the headlight switch is in
the “AUTO” position, a sugges-
tion message will be displayed
asking if you wish to turn the
headlights off.
To turn the headlights off, select
“Yes”.
If the driver's door is opened after
the power switch is turned off, this
suggestion message will not be dis-
played.
■
Customization
Some functions can be customized.
(
WARNING
■
Cautions during setting up
the display
As the hybrid system needs to be
operating during setting up the
display, ensure that the vehicle is
parked in a place with adequate
ventilation. In a closed area such
as a garage, exhaust gases
including harmful carbon monox-
ide (CO) may collect and enter
the vehicle. This may lead to
death or a serious health hazard.
NOTICE
■
During setting up the display
To prevent 12-volt battery dis-
charge, ensure that the hybrid
system is operating while setting
up the display features.
Warning message display
(
)
Suggestion function
112
2-1. Instrument cluster
*
: If equipped
Illustrations used in this text are intended as examples, and may differ from
the image that is actually displayed by the head-up display.
Shift position display (
Speed limit/RSA (Road Sign Assist) display area
Displays the following items:
• Speed limit of the current road (linked to the navigation system) (U.S.A.
only)
• RSA (Road Sign Assist) display (if equipped) (
Vehicle speed display area
Hybrid System Indicator/Tachometer/Outside temperature
(
Navigation system-linked display area (if equipped) (
Displays the following items, which are linked to the navigation system:
• Route guidance to destination
• Street name
• Compass (heading-up display)
Head-up display
*
The head-up display is linked to the meters and navigation
system (if equipped) and projects a variety of information in
front of the driver, such as the current vehicle speed and route
guidance to a set destination.
System components
113
2-1. Instrument cluster
2
Vehicle
s
ta
tu
s information an
d in
dicat
or
s
Driving assist system status display area (
Message display area (
The following pop-up displays will be displayed in certain situations:
• Warning/message
• Hands-free system status
• Audio system operation status
■
Head-up display will operate
when
The power switch is in ON.
■
When using the head-up dis-
play
The head-up display may seem
dark or hard to see when viewed
through sunglasses, especially
polarized sunglasses. Adjust the
brightness of the head-up display or
remove your sunglasses.
■
Outside temperature display
If the outside temperature becomes
approximately 37°F (3°C) or lower,
the low outside temperature indica-
tor will flash for 10 seconds then the
low outside temperature indicator
and outside temperature display will
turn off. The low outside tempera-
ture indicator will operate again if
the outside temperature becomes
approximately 41°F (5°C) or more
and then decreases to 37°F (3°C) or
lower.
WARNING
■
Before using the head-up dis-
play
●
Check that the position and
brightness of the head-up dis-
play image does not interfere
with safe driving. Incorrect
adjustment of the image’s posi-
tion or brightness may obstruct
the driver’s view and lead to an
accident, resulting in death or
serious injury.
●
Do not continuously look at the
head-up display while driving as
you may fail to see pedestrians,
objects on the road, etc. ahead
of the vehicle.
NOTICE
■
To prevent damage to compo-
nents
●
Do not place any drinks near
the head-up display projector. If
the projector gets wet, electrical
malfunctions may result.
●
Do not place anything on or put
stickers onto the head-up dis-
play projector. Doing so could
interrupt head-up display indica-
tions.
●
Do not touch the inside of the
head-up display projector or
thrust sharp edges or the like
into the projector. Doing so
could cause mechanical mal-
functions.
114
2-1. Instrument cluster
■
Changing settings of the
head-up display
Select
on the multi-informa-
tion display (
P.528) and then
.
■
Enabling/disabling the
head-up display
Press
to enable/disable the
head-up display.
■
Changing the head-up dis-
play settings
Press and hold
to display the
following settings.
“HUD Brightness/Position”
Select to adjust the brightness and
vertical position of the head-up dis-
play.
“HUD Driving Support”
• Tachometer Settings
Blank/Hybrid System/Tachometer
Select to change the display to
blank (no display)/Hybrid System
Indicator/tachometer.
Select to enable/disable the follow-
ing items:
• Navigation (if equipped)
• Driving Assist
• Compass (if equipped)
• Audio
“HUD Rotation”
Select to adjust the angle of the
head-up display.
Press the
or
switch to
adjust the angle of the head-up dis-
play.
■
Enabling/disabling of the
head-up display
If the head-up display is disabled, it
will remain disabled when the power
switch is turned off then back to ON.
■
Display brightness
The brightness of the head-up dis-
play can be adjusted on
of the
multi-information display. Also, it is
automatically adjusted according to
the ambient brightness.
■
Automatic adjustment of the
head-up display position (vehi-
cles with driving position mem-
ory)
A desired head-up display position
can be entered to memory and
recalled automatically by the driving
position memory system. (
■
When the 12-volt battery is dis-
connected
The customize settings of the
head-up display will be reset.
■
Customization
Some functions can be customized.
(
Using the head-up display
WARNING
■
Caution for changing settings
of the head-up display
As the hybrid system needs to be
operating while changing the set-
tings of the head-up display,
ensure that the vehicle is parked
in a place with adequate ventila-
tion. In a closed area such as a
garage, exhaust gases including
harmful carbon monoxide (CO)
may collect and enter the vehicle.
This may lead to death or a seri-
ous health hazard.
115
2-1. Instrument cluster
2
Vehicle
s
ta
tu
s information an
d in
dicat
or
s
■
Hybrid System Indicator
Charge area
Hybrid Eco area
Eco area
Power area
Displayed content is the same as
that displayed on the meter (Hybrid
System Indicator). For details, refer
to P.90.
■
Tachometer
Displays the engine speed in
revolutions per minute.
■
Outside temperature
Displayed in the following situa-
tions:
When the power switch is
turned to ON (Displayed for
approximately 10 seconds)
When the low outside tem-
perature indicator is flashing
Displayed content is the same
as that displayed on the
multi-information display. For
details, refer to the explanation
of the outside temperature dis-
play on the multi-information
display. (
Displays the following naviga-
tion system linked items:
(Refer to “NAVIGATION AND
MULTIMEDIA SYSTEM
OWNER’S MANUAL”.)
■
Route guidance to destina-
tion
Displayed when the navigation
system is performing route guid-
ance. When approaching an
intersection, an arrow indicating
the suggested direction of travel
will be displayed.
■
Street name
Depending on the situation, the
names of the streets of an
approaching intersection will be
displayed.
■
Compass (heading-up dis-
play)
Displays the direction of travel.
NOTICE
■
When changing the settings
of the head-up display
To prevent 12-volt battery dis-
charge, ensure that the hybrid
system is operating while the
changing the settings of the
head-up display.
Hybrid System Indica-
tor/Tachometer/Outside
temperature
Navigation system-linked
display area (if equipped)
116
2-1. Instrument cluster
■
Street name display (vehicles
with a navigation system)
Depending on the situation, such as
when no information is available in
map data, etc., the street names of
an intersection may not be dis-
played.
Displays the operational status
of the following systems:
LTA (Lane Tracing Assist)
(
Dynamic radar cruise control
with full-speed range
(
PCS (Pre-Collision System)
(
Parking Support Brake func-
tion (for static objects) (if
equipped) (
Intuitive parking assist (if
equipped) (
Drive-Start Control (
Brake Override System
(
Displayed content is the same as
that displayed on the multi-informa-
tion display. For details, refer to the
explanations of each system.
Displays the following
multi-information display linked
icons and a message:
: Master warning icon
Displayed when a warning mes-
sage is displayed on the multi-infor-
mation display. (
: Information icon
Displayed when a sugges-
tion/advice pop-up display is dis-
played on the multi-information
display. (
Depending on the situation, the
following will be displayed:
■
Warning/Message
Depending on the situation, a
warning message or other mes-
sage will be displayed.
Warning messages
Certain warning messages can be
displayed.
Pop-up displays
When the driving assist system
operates, some of the information
displayed on the multi-information
display will be displayed on the
head-up display as a pop-up dis-
play.
■
Hands-free system status
Displayed when the hands-free
system is operated.
(Refer to “NAVIGATION AND
MULTIMEDIA SYSTEM
OWNER’S MANUAL”.)
■
Audio system operation
status
Displayed when the audio sys-
Driving assist system sta-
tus display area
/
icons
Message display area
117
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
tem is operated.
(Refer to “NAVIGATION AND
MULTIMEDIA SYSTEM
OWNER’S MANUAL”.)
■
Pop-up displays
Depending on the pop-up display,
the currently displayed item in the
message display area may be tem-
porarily not displayed. The item will
be displayed after the pop-up dis-
play is no longer displayed.
Audio system screen
Multi-information display
Meter control switches
■
Audio system screen
Audio or Audio Plus (vehicles
without Data Communication
Module)
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
Energy monitor/con-
sumption screen
The state of the hybrid sys-
tem can be viewed on the
multi-information display
and audio system display.
Vehicles with a 12.3-inch
display: The energy monitor
or consumption screen can
be displayed and operated
on the Toyota multi-opera-
tion touch.
System components
Energy monitor
118
2-1. Instrument cluster
If a screen other than “Energy Mon-
itor” is displayed, select “Energy”.
Audio Plus (vehicles with
Data Communication Mod-
ule) or Premium Audio
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
3
Select “ECO” on the “Infor-
mation” screen.
If a screen other than “Energy Mon-
itor” is displayed, select “Energy”.
12.3-inch display
1
Select
Toyota multi-oper-
ation touch (
2
Select “Energy”.
The screen position can also be
changed by select a desired infor-
mation in full screen.
When the vehicle is powered by the electric motor (traction motor) (Exam-
ple: 8-inch display)
2WD/AWD models
AWD models only
When the vehicle is powered by both the gasoline engine and the electric
motor (traction motor) (Example: 8-inch display)
2WD/AWD models
AWD models only
119
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
When the vehicle is powered by the gasoline engine (Example: 8-inch dis-
play)
2WD/AWD models
120
2-1. Instrument cluster
When the vehicle is charging the hybrid battery (traction battery) (Example:
8-inch display)
2WD/AWD models
AWD models only
121
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
These images are examples only,
and may vary slightly from actual
conditions.
Hybrid battery (traction bat-
tery) status (Example: 8-inch
display)
Low
High
These images are examples only,
and may vary slightly from actual
conditions.
■
Multi-information display
4.2-inch display
1
Press
or
of the meter
control switch to select
.
2
Press
or
of the meter
control switch to select the
energy monitor display.
7-inch display
1
Press
or
of the meter
control switch to select
.
2
Press
or
of the meter
control switch to select the
energy monitor display.
When there is no energy flow (Example: 8-inch display)
2WD/AWD models
122
2-1. Instrument cluster
When the vehicle is powered by the electric motor (traction motor) (Exam-
ple: 7-inch display)
2WD/AWD models
AWD models only
When the vehicle is powered by both the gasoline engine and the electric
motor (traction motor) (Example: 7-inch display)
2WD/AWD models
AWD models only
When the vehicle is powered by the gasoline engine (Example: 7-inch dis-
play)
2WD/AWD models
123
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
When the vehicle is charging the hybrid battery (traction battery) (Example:
7-inch display)
2WD/AWD models
AWD models only
When there is no energy flow (Example: 7-inch display)
2WD/AWD models
124
2-1. Instrument cluster
These images are examples only, and may vary slightly from actual condi-
tions.
Hybrid battery (traction bat-
tery) status (Example: 7-inch
display)
Low
High
These images are examples only,
and may vary slightly from actual
conditions.
■
Trip information
Audio or Audio Plus (vehicles
without Data Communication
Module)
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
If a screen other than “Trip Informa-
tion” is displayed, select “Trip Infor-
mation”.
Audio Plus (vehicles with
Data Communication Mod-
ule) or Premium Audio
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
3
Select “ECO” on the “Infor-
mation” screen.
If a screen other than “Trip Informa-
tion” is displayed, select “Trip Infor-
mation”.
12.3-inch display
1
Select
Toyota multi-oper-
ation touch (
2
Select “TripInfo.”.
The screen position can also be
changed by select a desired infor-
mation in full screen.
Resetting the consumption
data
Fuel consumption in the past
15 minutes
Current fuel consumption
Regenerated energy in the
past 15 minutes
One symbol indicates 50 Wh. Up to
5 symbols are shown.
Average vehicle speed since
the hybrid system was
started.
Elapsed time since the hybrid
system was started.
Cruising range
Consumption
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст