Toyota Tundra (2015 year). Manual — part 1817
(c) Disconnect the air pump connector clamp's holder.
(d) Using a clip remover, detach the wire harness clamp.
(e) Disconnect the No. 5 water by-pass hose.
(f) Remove the air tube bracket bolt.
(g) Remove the 3 bolts, water inlet housing and No. 3 water
by-pass hose.
(h) Remove the gasket from the water pump.
12. REMOVE WATER PUMP PULLEY
(a) Using SST, hold the water pump pulley.
SST: 09960-10010
09962-01000
09963-01000
(b) Remove the 4 bolts and water pump pulley.
13. REMOVE WATER PUMP ASSEMBLY
(a) Remove the 8 bolts, water pump and gasket.
3UR-FE COOLING: WATER PUMP: REMOVAL; 2015 MY Tundra [0...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002S4R03QX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE COOLING: WATER PUMP: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL WATER PUMP ASSEMBLY
(a) Install a new gasket and the water pump with the 8 bolts
shown in the illustration.
Torque:
for bolt A -
47 N·m {479 kgf·cm, 35ft·lbf}
for bolt B -
23 N·m {235 kgf·cm, 17ft·lbf}
for bolt C -
20 N·m {204 kgf·cm, 15ft·lbf}
2. INSTALL WATER PUMP PULLEY
(a) Temporarily install the pulley with the 4 bolts.
(b) Using SST, hold the pulley and tighten the 4 bolts.
SST: 09960-10010
09962-01000
09963-01000
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
3. INSTALL WATER INLET HOUSING
(a) Install a new gasket to the water pump.
3UR-FE COOLING: WATER PUMP: INSTALLATION; 2015 MY Tundr...
(b) Install the No. 3 water by-pass hose and water inlet housing
with the 3 bolts.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
HINT:
(c) Install the air tube bracket bolt.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
(d) Connect the No. 5 water by-pass hose.
HINT:
(f) Attach the wire harness clamp.
(g) Connect the air pump connector.
(h) Connect the No. 2 and No. 3 air hoses.
3UR-FE COOLING: WATER PUMP: INSTALLATION; 2015 MY Tundr...
4. CONNECT WATER BY-PASS PIPE (w/ Oil Cooler)
(a) Connect the water by-pass pipe with water hose.
HINT:
(b) Install the 3 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
(c) Connect the No. 6 water by-pass hose.
5. INSTALL NO. 1 WATER BY-PASS HOSE
6. INSTALL FAN SHROUD
7. CONNECT INLET RADIATOR HOSE
8. CONNECT OUTLET RADIATOR HOSE
9. INSTALL AIR CLEANER ASSEMBLY
10. INSTALL AIR CLEANER HOSE ASSEMBLY
11. ADD ENGINE COOLANT
12. INSPECT FOR COOLANT LEAK
13. INSTALL V-BANK COVER SUB-ASSEMBLY
14. INSTALL NO. 1 ENGINE UNDER COVER
3UR-FE COOLING: WATER PUMP: INSTALLATION; 2015 MY Tundr...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст