Toyota Tundra (2015 year). Manual — part 2430
A
4.
INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(a) Remove the fuel suction with pump and gauge tube.
for 1UR-FE
for 3UR-FE
for 3UR-FBE
(b) Measure the resistance according to the value(s) in the
table below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
A2 - B2
Always
Below 1 Ω
A3 - B1
Result
RESULT
PROCEED TO
OK
A
NG (for 1UR-FE)
B
NG (for 3UR-FE)
C
NG (for 3UR-FBE)
D
B
REPLACE FUEL SUCTION WITH PUMP AND GAUGE
TUBE ASSEMBLY
C
REPLACE FUEL SUCTION WITH PUMP AND GAUGE
TUBE ASSEMBLY
D
REPLACE FUEL SUCTION WITH PUMP AND GAUGE
TUBE ASSEMBLY
A
REPLACE COMBINATION METER ASSEMBLY
METER: METER / GAUGE SYSTEM: B1500; Fuel Sender Open Detecte...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000002XJI024X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: METER: METER / GAUGE SYSTEM: U0100; Lost Communication with ECM / PCM "A"; 2015 MY Tundra
[08/2014 - ]
DTC
U0100
Lost Communication with ECM / PCM "A"
DESCRIPTION
The combination meter communicates with the ECM via the CAN line.
DTC
CODE
DTC DETECTION CONDITION
TROUBLE AREA
U0100
No communication with ECM continues for 3 seconds or more (No
communication to ECM or skid control ECU continues for 60 seconds or
more)
CAN communication
system
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1.
CHECK FOR DTC
METER: METER / GAUGE SYSTEM: U0100; Lost Communication wit...
(a) Check for DTCs and note any codes that are output
.
(b) Clear the DTC
.
(c) Recheck for DTC
.
Result
RESULT
PROCEED TO
DTC U0100 is not output
A
DTC U0100 is output
B
HINT:
If the CAN communication system DTC U0100 and another DTC are output at the same time, perform
troubleshooting for the CAN communication system DTC U0100 first.
B
Go to CAN COMMUNICATION SYSTEM
A
USE SIMULATION METHOD TO CHECK
METER: METER / GAUGE SYSTEM: U0100; Lost Communication wit...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000002O0D02EX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: METER: METER / GAUGE SYSTEM: U0129; Lost Communication with Brake System Control Module; 2015
MY Tundra [08/2014 - ]
DTC
U0129
Lost Communication with Brake System Control Module
DESCRIPTION
The combination meter communicates with the skid control ECU via the CAN line.
DTC
CODE
DTC DETECTION CONDITION
TROUBLE AREA
U0129
more
No communication with skid control ECU continues for 3 seconds or
more (No communication with ECM or skid control ECU continues for
60 seconds or more)
CAN communication
system
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1.
CHECK FOR DTC
METER: METER / GAUGE SYSTEM: U0129; Lost Communication with...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст