Toyota Tundra (2015 year). Manual — part 2168
A
NEXT
RESULT
PROCEED TO
Door window regulator and power window regulator motor is replaced or removed/installed.
A
Door window regulator and power window regulator motor is not replaced or removed/installed.
B
B
GO TO STEP 8
7.
RESET POWER WINDOW REGULATOR MOTOR
(a) If the master switch AUTO light is blinking, reset the power window regulator motor
.
8.
CONFIRMATION TEST
NEXT
END
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL ...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM0000016810EYX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function):
OPERATION CHECK; 2015 MY Tundra [08/2014 - ]
OPERATION CHECK
1. CHECK WINDOW LOCK SWITCH
(a) Check that the front passenger side power window and rear
power windows cannot be operated when the window lock switch
(b) Check that the front passenger side power window and rear
power windows can be operated when the window lock switch is
pressed again.
OK:
Front passenger side power window and rear power windows can
be operated.
2. CHECK MANUAL UP/DOWN FUNCTION
(a) Check that the driver side power window operates as follows:
OK
CONDITION
MASTER SWITCH
SWITCH OPERATION
POWER WINDOW
Ignition switch ON
Driver side
Pulled halfway up
UP (Closes)
Pushed halfway down
DOWN (Opens)
(b) Check that the front passenger side and rear power windows operate as follows:
OK
CONDITION
REGULATOR SWITCH
SWITCH OPERATION
POWER WINDOW
Ignition switch ON
Window lock switch off
Front passenger side
Pulled halfway up
UP (Closes)
Pushed halfway down
DOWN (Opens)
Rear LH side
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
Rear RH side
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
(c) Check that the power window (for back window glass) operates as follows:
OK
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL ...
CONDITION
REGULATOR SWITCH
SWITCH OPERATION
POWER WINDOW
Ignition switch ON
Back door
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
3. CHECK AUTO UP/DOWN FUNCTION
(a) Check that the driver side power window operates as follows:
OK
CONDITION
MASTER SWITCH
SWITCH OPERATION
POWER WINDOW
Ignition switch ON
Driver side
Pulled up (One touch operation)
AUTO UP (Closes)
Pushed down (One touch operation)
AUTO DOWN (Opens)
(b) Check that the front passenger side power window operates as follows:
OK
CONDITION
REGULATOR
SWITCH
SWITCH OPERATION
POWER WINDOW
Ignition switch ON
Window lock switch
off
Front passenger
side
Pulled up (One touch operation)
AUTO UP (Closes)
Pushed down (One touch
operation)
AUTO DOWN
(Opens)
4. CHECK REMOTE MANUAL UP/DOWN FUNCTION
(a) Check that the front passenger side and rear power windows operate as follows:
OK
CONDITION
MASTER SWITCH
SWITCH OPERATION
POWER WINDOW
Ignition switch ON
Window lock switch off
Front passenger side
Pulled halfway up
UP (Closes)
Pushed halfway down
DOWN (Opens)
Rear LH side
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
Rear RH side
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
5. CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH OFF
(a) Check that all the power windows can be operated with the master switch after the ignition switch is
turned OFF.
(b) Check that the key-off operation function does not operate after a front side door is opened.
(c) Check that all the power windows cannot be operated after more than approximately 43 +/-1.5 seconds
have elapsed since the ignition switch is turned OFF.
6. CHECK MASTER SWITCH LED ILLUMINATION
(a) Check the LED illumination.
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL ...
(1) Check that the LED located on the master switch illuminates when the ignition switch is turned ON.
7. CHECK KEY-LINKED FUNCTION USING DRIVER SIDE DOOR KEY CYLINDER
(a) Check that all power windows operate as follows.
OK
CONDITION
KEY OPERATION
POWER
WINDOW
No key is inside vehicle, and all doors are
closed.
Turned (LOCK) for more than 2.3 seconds.
UP (Closes)
No key is inside vehicle, and all doors are
closed.
Returned to neutral position.
STOP
No key is inside vehicle, and all doors are
closed.
Turned (UNLOCK) for more than 2.3
seconds.
DOWN (Opens)
No key is inside vehicle, and all doors are
closed.
Returned to neutral position.
STOP
8. CHECK JAM PROTECTION FUNCTION
(a) Check the basic function (for driver side and front passenger side windows).
CAUTION:
Do not put your fingers between the door frame and door glass to check functions. Also, prevent any part
The jam protection function is operative during both AUTO UP and MANUAL UP operation while the engine
is running or the ignition switch is ON, and also for 45 seconds after the ignition switch is turned OFF.
(1) Fully open the window.
(3) Operate the auto up or manual up function to check that the power window goes down when the
window contacts the book, and stops when the opening reaches approximately 200 mm (7.87 in.).
HINT:
The power window moves down approximately 125 mm (4.93 in.). However, when the opening does not
reach 200 mm (7.87 in.), the power window continues to go down until the opening reaches 200 mm (7.87
in.) or until approximately 5 seconds have elapsed.
(4) While the power window is moving down, check that the door glass cannot be moved up even when the
power window switch is used.
9. CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY LED ILLUMINATION
(a) Check that the LED located on the power window regulator switch assembly illuminates when the ignition
switch is ON and the window lock switch is set to the UNLOCK position.
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст