Toyota Tundra (2015 year). Manual — part 2624
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002S4Y03LX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE LUBRICATION: OIL PUMP: DISASSEMBLY; 2015 MY Tundra [08/2014 - ]
DISASSEMBLY
1. REMOVE OIL PUMP COVER
(a) Remove the 13 bolts, oil pump cover, drive rotor and driven
rotor.
2. REMOVE OIL PUMP RELIEF VALVE
(a) Remove the relief valve plug.
(b) Remove the valve spring and oil pump relief valve.
3UR-FE LUBRICATION: OIL PUMP: DISASSEMBLY; 2015 MY Tund...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002S4X04GX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE LUBRICATION: OIL PUMP: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. DISCHARGE FUEL SYSTEM PRESSURE
2. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from
the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery
terminal notice before proceeding with work
.
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
4. DRAIN ENGINE OIL
5. DRAIN ENGINE COOLANT
6. REMOVE RADIATOR ASSEMBLY
7. REMOVE AIR CLEANER HOSE ASSEMBLY
8. REMOVE AIR CLEANER ASSEMBLY
9. DISCONNECT ENGINE WIRE
(a) Engine Room LH Side:
(1) Remove the engine room relay block cover.
(2) Disconnect the 2 connectors and detach the 2 clamps from the engine room junction block.
(3) Disconnect the 4 air injection control driver connectors.
3UR-FE LUBRICATION: OIL PUMP: REMOVAL; 2015 MY Tundra [0...
(4) Disconnect the 2 wire harness clamps.
(5) Disconnect the injector connector.
(6) Disconnect the 4 ignition coil connectors.
(7) Disconnect the 2 VVT sensor connectors.
(8) Disconnect the 5 clamps.
(9) Remove the 2 bolts and ground wire LH.
(10) Disconnect the engine coolant temperature sensor
connector.
(11) Disconnect the 2 camshaft timing oil control valve connectors.
(12) Disconnect the camshaft position sensor connector.
(13) Disconnect the 3 clamps.
(14) Disconnect the cooler compressor connector.
3UR-FE LUBRICATION: OIL PUMP: REMOVAL; 2015 MY Tundra [0...
(b) Engine Room RH Side:
(1) Disconnect the 2 camshaft timing oil control valve
connectors.
(2) Disconnect the 4 ignition coil connectors.
(3) Disconnect the injector connector.
(4) Disconnect the 2 VVT sensor connectors.
(5) Remove the 2 bolts and ground wire RH.
(6) Disconnect the 2 air pump connectors.
(7) Disconnect the throttle position sensor and throttle control
motor connector.
(8) Disconnect the 7 clamps.
(c) Disconnect the 2 clamps and power steering oil pressure
switch connector.
Text in Illustration
*1
Junction Connector
(d) for 4WD:
Disconnect the clamp and junction connector.
10. REMOVE INTAKE MANIFOLD
11. DISCONNECT AIR PUMP HOSE AND WIRE HARNESS
(a) Slide the 2 clamps and disconnect the No. 2 air hose and No.
3 air hose from the air tube sub-assembly.
Text in Illustration
*1
No. 3 Air Hose
*2
No. 2 Air Hose
(b) Disconnect the 2 clamps.
12. DISCONNECT HEATER HOSE AND PIPE
3UR-FE LUBRICATION: OIL PUMP: REMOVAL; 2015 MY Tundra [0...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст