Toyota Tundra (2015 year). Manual — part 305
(a) Remove the bolt and cable retainer.
20. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Remove the 5 bolts and disconnect the No. 3 parking brake cable from the intermediate lever.
NOTICE:
Do not bend and twist the parking brake cable.
(b) Remove the bolt and No. 3 parking brake cable from the rear
axle carrier.
21. REMOVE REAR WHEEL RH
PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL; 2015 ...
22. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
23. REMOVE REAR DISC RH
HINT:
Use the same procedures described for the LH side.
24. REMOVE PARKING BRAKE SHOE RETURN SPRING RH
HINT:
Use the same procedures described for the LH side.
25. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
26. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
27. REMOVE PARKING BRAKE SHOE LEVER RH
HINT:
Use the same procedures described for the LH side.
28. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
(a) Disconnect the No. 2 parking brake cable from the 2 clamps (labeled A).
(b) Remove the 5 bolts (labeled B) and disconnect the No. 2 parking brake cable from the intermediate lever
(labeled C).
NOTICE:
Do not bend and twist the parking brake cable.
(c) Remove the bolt (labeled D) and clamp.
PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL; 2015 ...
(d) Remove the bolt and No. 2 parking brake cable from the rear
axle carrier.
29. REMOVE PARKING BRAKE INTERMEDIATE LEVER SUB-ASSEMBLY
PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL; 2015 ...
(a) Remove the 2 bolts and intermediate lever with bracket.
(b) Remove the clip, washer, pin and intermediate lever from the bracket.
30. REMOVE NO. 2 CABLE SUPPORT BRACKET
(a) Remove the 2 bolts and bracket.
PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL; 2015 ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст