Toyota Tundra (2015 year). Manual — part 2427
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE
DEACTIVATION
CONDITION
While ignition switch is ON position, brake
warning light signal is interrupted for 1 second
Brake warning light condition is
maintained until ignition switch off
Normal data is received
HEAD indicator light (for U.S.A.):
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE
DEACTIVATION
CONDITION
Headlight LO on request signal is
interrupted for 10 seconds during CAN bus
wake-up mode
Ignition switch is ON: HEAD
indicator light condition is
maintained
Ignition switch is OFF: HEAD
indicator light is off
Normal data is received
SLIP indicator light:
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE
DEACTIVATION
CONDITION
Frame data (including SLIP indicator on/blink
request signal) is interrupted for 0.9 seconds
SLIP indicator light condition is
maintained until ignition switch OFF
Normal data is received
TAIL indicator light (except U.S.A.):
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE
DEACTIVATION
CONDITION
Taillight on request signal is interrupted
for 10 seconds during CAN bus wake-up
mode
Ignition switch is ON: TAIL
indicator light condition is
maintained
Ignition switch is off: TAIL
indicator light is off
Normal data is received
Tire pressure warning light:
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE
DEACTIVATION
CONDITION
While ignition switch is ON, tire
pressure warning signals are
interrupted
Ignition switch is ON: Tire pressure
warning light blinks for 60 to 64
seconds
Ignition switch is OFF: Tire pressure
warning light is off
Normal data is received
METER: METER / GAUGE SYSTEM: FAIL-SAFE CHART; 2015 MY ...
A/T OIL TEMP warning light (for LCD Display Type):
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE DEACTIVATION
CONDITION
While ignition switch is ON, A/T OIL TEMP
warning signals are interrupted
Display condition is maintained
until ignition switch off
Normal data is received
CHARGE warning light:
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE DEACTIVATION
CONDITION
While ignition switch is ON, CHARGE
warning signals are interrupted
Display condition is maintained until
ignition switch off
Normal data is received
Oil pressure warning light (for LCD Display Type):
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE DEACTIVATION
CONDITION
While ignition switch is ON, OIL PRESSURE
warning light request signals are interrupted
Display condition is maintained
until ignition switch off
Normal data is received
4LO indicator light (for 4WD):
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE DEACTIVATION
CONDITION
While ignition switch is ON, frame (including B
INDL 4 bit) is interrupted for 3 seconds
Display condition is maintained
until ignition switch off
Normal data is received
Washer fluid level warning light (for LCD Display Type):
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE DEACTIVATION
CONDITION
While ignition switch is ON, washer fluid level
low signals are interrupted
Display condition is maintained
until ignition switch off
Normal data is received
AUTO LSD indicator light:
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE DEACTIVATION
CONDITION
While ignition switch is ON, frame (including
B ALSD bit) is interrupted
Display condition is maintained until
ignition switch off
Normal data is received
VSC OFF indicator light:
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE DEACTIVATION
CONDITION
While ignition switch is ON, frame (including B
TRCW bit) is interrupted for 0.9 seconds
Display condition is maintained
until ignition switch off
Normal data is received
METER: METER / GAUGE SYSTEM: FAIL-SAFE CHART; 2015 MY ...
TRAC OFF indicator light (for LCD Display Type):
CONDITION
FAIL-SAFE OPERATION
FAIL-SAFE DEACTIVATION
CONDITION
While ignition switch is ON, TRAC OFF indicator
light signal is interrupted for 1 second
Display condition is maintained
until ignition switch off
Normal data is received
METER: METER / GAUGE SYSTEM: FAIL-SAFE CHART; 2015 MY ...
Last Modified: 9-16-2014
6.6 U
Doc ID: RM000002Z4S01OX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: METER: METER / GAUGE SYSTEM: DATA LIST / ACTIVE TEST; 2015 MY Tundra [08/2014 - ]
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely
on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream ON.
(d) Enter the following menus: Body Electrical, Powertrain or Chassis / (desired system) / Data List.
(e) According to the display on Techstream, read the "Data List".
Combination Meter:
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
ODO/TRIP Change
SW
Trip switch (ODO/TRIP switch)
condition/ON or OFF
ON: Trip switch (ODO/TRIP
switch) pushed
OFF: Trip switch (ODO/TRIP
switch) not pushed
-
Vehicle Speed
Meter
Vehicle speed/Min.: 0 (0),
Max.: 255 (158)
Almost same as actual vehicle
speed (when driving)
Unit: km/h (mph)
Engine Rpm
Engine speed/Min.: 0, Max.:
12750
Idling: 700 to 800
Unit: rpm
Coolant
Temperature
Engine coolant
temperature/Min.: -40 (-40),
Max.: 140 (284)
After warming up: 80 to 105
(176 to 221)
Unit: °C (°F)
If value -40
(-40): sensor
circuit open
If value 140
(284): sensor
circuit shorted
Washer Switch
Washer fluid level warning
signal/ON or OFF
ON: Washer fluid level low
OFF: Washer fluid level not low
-
Multi Display
Select Switch
Steering pad switch (DISP)/ON
or OFF
ON: Steering pad switch (DISP)
pressed
OFF: Steering pad switch
(DISP) not pressed
-
METER: METER / GAUGE SYSTEM: DATA LIST / ACTIVE TEST; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст