Toyota Tundra (2015 year). Manual — part 504
Last Modified: 9-16-2014
6.6 N
Doc ID: RM0000010N807ZX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760F AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT; 2015 MY
Tundra [08/2014 - ]
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(b) Align the groove with the neutral basic line.
(c) Hold the switch in position and tighten the bolt.
Torque:
13 N·m {130 kgf·cm, 9ft·lbf}
(d) After the adjustment, perform the on-vehicle inspection
.
A760F AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITI...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000010N9094X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760F AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: INSTALLATION; 2015 MY
Tundra [08/2014 - ]
INSTALLATION
1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Install the switch to the manual valve shaft.
(b) Temporarily install the bolt.
(c) Install a new lock washer and the nut.
Torque:
6.9 N·m {70 kgf·cm, 61in·lbf}
(d) Temporarily install the control shaft lever RH.
(e) Turn the control shaft lever RH counterclockwise until it stops,
and then turn it clockwise 2 notches to set it to the N position.
A760F AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITI...
(f) Align the groove with the neutral basic line.
(g) Hold the switch in position and tighten the bolt.
Torque:
13 N·m {130 kgf·cm, 9ft·lbf}
washer and nut.
Torque:
16 N·m {160 kgf·cm, 12ft·lbf}
(j) Connect the switch connector.
2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Connect the cable with the nut.
Torque:
13 N·m {133 kgf·cm, 10ft·lbf}
NOTICE:
When connecting the cable to the transmission control shaft
4. ADJUST SHIFT LEVER POSITION (for Floor Shift Type)
5. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
A760F AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITI...
(a) Inspect the switch
.
A760F AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITI...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст