Toyota Tundra (2015 year). Manual — part 813
Adhesive:
Toyota Genuine Adhesive 1360K, Three Bond 1360K or equivalent
9. INSTALL FRONT DIFFERENTIAL CASE BEARING
(a) Using SST and a press, press in the 2 bearings (inner race).
SST: 09316-20011
SST: 09316-60011
09316-00041
10. INSTALL FRONT DIFFERENTIAL CASE BEARING
HINT:
When replacing the 2 differential case bearings, fit the thinnest washer to each bearing. When reusing the
Text in Illustration
*1
Plate Washer
(b) Using SST and a press, install the bearing (outer race) onto the bearing retainer.
SST: 09950-60020
09951-00890
SST: 09950-70010
09951-07150
(c) Install a new plate washer onto the differential carrier.
Text in Illustration
*1
Plate Washer
(d) Using SST and a press, press in the bearing (outer race) onto the differential carrier assembly.
SST: 09950-60020
09951-00890
SST: 09950-70010
09951-07150
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (f...
11. INSTALL FRONT DRIVE PINION FRONT RADIAL BALL BEARING
(a) Using SST, install the bearing (outer race).
SST: 09950-60020
09951-00810
09951-00890
12. INSTALL FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
(a) Using SST, install the washer and bearing (outer race).
SST: 09950-60020
09951-00890
09951-01030
Text in Illustration
*1
Plate Washer
HINT:
13. INSTALL FRONT DIFFERENTIAL BREATHER PLUG OIL DEFLECTOR
(a) Install the front differential breather plug oil deflector with the 2
bolts.
Torque:
7.0 N·m {71 kgf·cm, 62in·lbf}
14. INSTALL FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (f...
(a) Using SST and a press, press in the bearing (inner race).
SST: 09506-35010
15. TEMPORARILY INSTALL DIFFERENTIAL DRIVE PINION
16. INSTALL FRONT DRIVE PINION FRONT RADIAL BALL BEARING
(a) Using SST and a hammer, lightly tap in the bearing (inner race)
to install it.
SST: 09316-60011
09316-00041
17. INSTALL FRONT DIFFERENTIAL DRIVE PINION OIL SLINGER
18. INSPECT DIFFERENTIAL DRIVE PINION PRELOAD
(a) Using SST, install the companion flange.
SST: 09950-30012
09951-03010
09953-03010
09954-03010
09955-03030
09956-03020
Text in Illustration
*a
Turn
*b
Hold
(c) Using SST to hold the companion flange.
SST: 09330-00021
09330-00030
(d) Tighten the nut until the standard preload is reached.
Torque:
451 N·m {4599 kgf·cm, 333ft·lbf} or less
NOTICE:
As there is no spacer, tighten the nut a little at a time, being careful not to overtighten it.
Standard preload (at starting):
BEARING
SPECIFIED CONDITION
New
2.97 to 3.47 N*m (31 to 35 kgf*cm, 27 to 30 in.*lbf)
Reused
2.14 to 2.45 N*m (22 to 24 kgf*cm, 19 to 21 in.*lbf)
If necessary, disassemble and inspect the differential assembly.
19. INSTALL FRONT DIFFERENTIAL CASE
(a) Remove the bearing retainer.
(b) Install the differential case to the differential carrier.
20. INSTALL FRONT DIFFERENTIAL CROSS SHAFT BEARING RETAINER
(a) Install the differential cross shaft bearing retainer and
differential support with the 14 bolts.
Torque:
for bolt A -
65 N·m {633 kgf·cm, 48ft·lbf}
for bolt B -
155 N·m {1581 kgf·cm, 114ft·lbf}
21. INSTALL FRONT DIFFERENTIAL UNION
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (f...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст