Toyota Tundra (2015 year). Manual — part 57
PARAMETER
TARGET
PHENOMENON
VOICE
QUALITY
TYPE
POSITIVE EFFECT OF
CHANGING VOICE
QUALITY
NEGATIVE EFFECT OF
CHANGING VOICE
QUALITY
The
amount of
echo is
reduced
(low level).
(low level).
A+D
The other
party hears
background
noise and
strong echoes
when listening
to your voice.
1200
The
amount of
background
noise the
other party
hears when
listening to
your voice
is reduced.
The
amount of
echo is
reduced
(high
level).
The volume
temporarily.
Sound
quality of
the other
party
deteriorates
(high level).
B+C
The other
party hears a
lot of
background
noise and
weak echoes
when listening
to your voice.
2100
The
amount of
background
noise the
other party
hears when
listening to
your voice
is sharply
reduced.
The
amount of
echo is
reduced
(low level).
The volume
temporarily.
Sound
quality of
the other
party
deteriorates
(low level).
B+D
The other
party hears a
lot of
background
noise and
strong echoes
when listening
to your voice.
2200
The
amount of
background
noise the
other party
hears when
listening to
your voice
is sharply
reduced.
The
amount of
echo is
reduced
(high
The volume
temporarily.
Sound
quality of
the other
party
deteriorates
(high level).
NAVIGATION: NAVIGATION SYSTEM: OPERATION CHECK; 201...
PARAMETER
TARGET
PHENOMENON
VOICE
QUALITY
TYPE
POSITIVE EFFECT OF
CHANGING VOICE
QUALITY
NEGATIVE EFFECT OF
CHANGING VOICE
QUALITY
level).
HINT:
HINT:
This function is used when checking the speaker wiring and whether the speakers are functioning properly.
Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some
detailed areas may not be shown exactly the same as on the actual vehicle screen.
(a) Turn audio mode on and play any audio source.
HINT:
This audio source will be used for the speaker check.
(b) Enter diagnostic mode
.
(c) Select "Failure Diagnosis" from the "Service Menu" screen.
(d) Select "System Check" from the "Failure Diagnosis" screen.
(e) Select "SP Check ON" from the "System Check Mode" screen.
(f) Check the speaker wiring and check that the speakers are functioning properly.
NAVIGATION: NAVIGATION SYSTEM: OPERATION CHECK; 201...
HINT:
Check that each speaker outputs sound from the selected audio source properly.
"SP Check OFF" is displayed during the speaker check.
Sound can be heard from the speakers around the vehicle in order beginning from the speaker on the front passenger
side.
More than one speaker may sound simultaneously depending on the speaker wiring.
(2) Ignition switch off.
(3) Diagnostic mode is turned off.
(4) The screen is changed to another screen.
(5) Audio mode is turned off.
10. CHECK SOFTWARE ERROR HISTORY
HINT:
This function is used to check the cause when the navigation receiver assembly screen is blacked out.
(a) Check software error history.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Navigation System / Utility / Software Error History.
(5) When an item is stored for Software Error History, record it before repairing the navigation receiver assembly.
Software Error History Screen Description
ERROR DESCRIPTION
TRIGGER
DETAIL
Software Reset
Navi Microcomputer
Hexadecimal Number
Audio Microcomputer
CAN Microcomputer
No Video Signal
Front Monitor
Rear Monitor
MOST Cold Restart
Always
HINT:
Software Error History can store up to 5 history data items. If a new software error occurs when 5 data items have
already been stored, the oldest data is cleared and the new data is stored.
If an error that is unsupported by the Techstream occurs, a "-" is displayed for the display items.
(b) Clear software error history.
.
Cleared using the Techstream.
Cleared using the system check mode screen.
Cleared using the unit check mode screen.
11. CHECK OPTICAL DISC ERROR HISTORY
HINT:
This function is used to check the cause when an optical disc error occurs.
(a) Check optical disc error history.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
NAVIGATION: NAVIGATION SYSTEM: OPERATION CHECK; 201...
(3) Turn the Techstream on.
(4) Enter the following menus: Body Electrical / Navigation System / Utility / Optical Disc Error History.
(5) When an item is stored for Optical Disc Error History, record it before proceeding with troubleshooting.
Optical Disc Error History Screen Description
DISPLAY
CONTENT
Error Type
Displays the malfunctioning device.
Date
Displays the date and time that the malfunction occurred.
"Error Type" Screen Description
ERROR TYPE
DETECTION CONDITION
ACTION
Read Error
When a disc read error occurs.
Proceed to next suspected area
shown in Problem Symptoms
Table
Disc damaged/upside
down/dirty
The disc cannot be read.
down.
Cannot determine disc
type
An unsuitable disc is inserted.
DPS error
When an error occurs while decoding MP3/WMA/AAC files.
Some files are corrupt
When MP3/WMA/AAC files cannot be played back because
they are unsupported.
Even though the file extensions are MP3, WMA or AAC
files cannot be played back because the header
information cannot be read.
Some files cannot be
found
When a disc without music data is played back.
When there are no playable MP3/WMA/AAC files.
Copy protection
violation
When a file with copyright protection that cannot be played back is
played back.
"Device" Screen Description
DEVICE
CONTENT
DVD-P
Navigation receiver assembly
CD-P
Not available
R-Seat DVD-P
Not available
HINT:
Optical Disc Error History can store up to 7 history data items. If a new optical disc error occurs when 7 data items have
already been stored, the oldest data is cleared and the new data is stored.
If an error that is unsupported by the Techstream occurs, a "-" or blank is displayed for the display items.
(b) Clear optical disc error history.
.
Cleared using the Techstream.
NAVIGATION: NAVIGATION SYSTEM: OPERATION CHECK; 201...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст