Toyota Tundra (2015 year). Manual — part 90
OK
Last Modified: 9-16-2014
6.6 J
Doc ID: RM000000NLH0QRX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: NAVIGATION: NAVIGATION SYSTEM: CD Sound Skips; 2015 MY Tundra [08/2014 - ]
CD Sound Skips
INSPECTION PROCEDURE
PROCEDURE
1.
CHECK DISC
(a) Check that the disc is not deformed or cracked.
OK:
No deformation or cracks on the disc.
NG
CHANGE DISC
2.
CHECK DISC
(a) Disc cleaning
(1) If dirt is on the disc surface, wipe it clean with a soft cloth
from the inside to the outside in a radial direction.
OK:
Malfunction disappears.
NOTICE:
Do not use a conventional record cleaner or antistatic
preservative.
NG
GO TO STEP 3
NAVIGATION: NAVIGATION SYSTEM: CD Sound Skips; 2015 MY ...
OK
END (DISC IS DIRTY)
3.
REPLACE DISC WITH ANOTHER AND RECHECK
(a) Replace the disc with a known good one and check that the malfunction disappears.
OK:
Malfunction disappears.
NG
GO TO STEP 4
OK
END (DISC IS DEFECTIVE)
4.
CHECK NAVIGATION RECEIVER ASSEMBLY
(a) Check that the navigation receiver assembly is properly installed
Result
RESULT
PROCEED TO
OK (for Column Shift Type)
A
OK (for Floor Shift Type)
B
NG (for Column Shift Type)
C
NG (for Floor Shift Type)
D
B
REPLACE NAVIGATION RECEIVER ASSEMBLY
C
REINSTALL NAVIGATION RECEIVER ASSEMBLY
D
REINSTALL NAVIGATION RECEIVER ASSEMBLY
A
REPLACE NAVIGATION RECEIVER ASSEMBLY
NAVIGATION: NAVIGATION SYSTEM: CD Sound Skips; 2015 MY ...
Last Modified: 9-16-2014
6.6 J
Doc ID: RM0000012CN0WVX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: NAVIGATION: NAVIGATION SYSTEM: Radio Broadcast cannot be Received or Poor Reception; 2015 MY
Tundra [08/2014 - ]
Radio Broadcast cannot be Received or Poor Reception
INSPECTION PROCEDURE
PROCEDURE
1.
CHECK IF RADIO AUTO-SEARCH FUNCTIONS PROPERLY
(a) Check the radio automatic station search function by activating it.
OK:
Automatic station search function stops on a station.
NG
GO TO STEP 2
OK
USE SIMULATION METHOD TO CHECK
2.
CHECK OPTIONAL COMPONENTS
(a) Check if any optional components that may decrease reception capacity, such as sunshade film or a
telephone antenna, are installed.
OK:
Optional components are installed.
NOTICE:
GO TO STEP 3
OK
REMOVE OPTIONAL COMPONENTS AND CHECK
AGAIN (SEE NOTICE ABOVE)
3.
CHECK RADIO ANTENNA
(a) Remove the pull top antenna pole sub-assembly from the fender antenna assembly.
NAVIGATION: NAVIGATION SYSTEM: Radio Broadcast cannot be R...
Noise occurs.
Result
RESULT
PROCEED TO
OK (for Column Shift Type)
A
OK (for Floor Shift Type)
B
NG
C
B
REPLACE NAVIGATION RECEIVER ASSEMBLY
C
GO TO STEP 4
A
REPLACE NAVIGATION RECEIVER ASSEMBLY
4.
CHECK NAVIGATION RECEIVER ASSEMBLY (ANTENNA)
(a) Remove the antenna connector from the navigation receiver
assembly.
(b) Turn the ignition switch to ACC with the navigation receiver assembly connector connected.
(c) Turn on the radio and turn into AM mode.
(d) Place a screwdriver, thin wire or other metal object on the navigation receiver assembly antenna jack
and check that noise can be heard from the speakers.
OK:
Noise occurs.
Result
RESULT
PROCEED TO
OK
A
NG (for Column Shift Type)
B
NG (for Floor Shift Type)
C
B
REPLACE NAVIGATION RECEIVER ASSEMBLY
C
REPLACE NAVIGATION RECEIVER ASSEMBLY
NAVIGATION: NAVIGATION SYSTEM: Radio Broadcast cannot be R...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст