Toyota Tundra (2015 year). Manual — part 1423
6. INSTALL STARTER ARMATURE PLATE
(a) Install the starter armature plate to the starter yoke.
NOTICE:
Install the starter plate so that the keyway is positioned between key-A and key-B.
7. INSTALL STARTER YOKE ASSEMBLY
(b) Using a T25 "TORX" socket wrench, install the 2 bolts.
Torque:
5.5 N·m {56 kgf·cm, 49in·lbf}
8. INSTALL MAGNET STARTER SWITCH ASSEMBLY
(a) Apply high temperature grease to the plunger hook.
(c) Install the magnet starter switch with the 2 nuts.
Torque:
7.5 N·m {76 kgf·cm, 66in·lbf}
(d) Connect the lead wire to the magnet starter switch and connect
it with the nut.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
1UR-FE STARTING: STARTER (for 1.6 kW Type): REASSEMBLY; 20...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM00000218X023X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE STARTING: STARTER (for 1.6 kW Type): INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL STARTER ASSEMBLY
(a) Install the flywheel housing side cover.
(b) Install the starter with the 2 bolts.
Torque:
37 N·m {377 kgf·cm, 27ft·lbf}
(c) Connect the starter wire with the nut.
Torque:
9.8 N·m {100 kgf·cm, 87in·lbf}
(d) Connect the starter connector.
(e) Connect the 2 wire harness clamps.
2. INSTALL STARTER COVER
1UR-FE STARTING: STARTER (for 1.6 kW Type): INSTALLATION; ...
(a) Install the starter cover with the 3 bolts.
Torque:
12 N·m {117 kgf·cm, 8ft·lbf}
3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
(a) Install the exhaust manifold RH
.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
1UR-FE STARTING: STARTER (for 1.6 kW Type): INSTALLATION; ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст