Toyota Tundra (2015 year). Manual — part 2303
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002VY101FX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: REMOVAL; 2015 MY Tundra [08/2014 -
]
REMOVAL
1. REMOVE AIR CONDITIONING UNIT
.
2. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY
3. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
4. REMOVE BLOWER ASSEMBLY
(a) Detach the 3 claws and remove the heater clamp.
(b) Remove the No. 1 cooling unit packing and No. 2 cooling unit
packing.
AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SEN...
(c) Remove the 6 screws and detach the 3 claws, and remove the
blower assembly.
5. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Remove the No. 1 cooler evaporator sub-assembly from the
blower assembly.
6. REMOVE NO. 1 COOLER THERMISTOR
(a) Remove the No. 1 cooler thermistor from the No. 1 cooler
evaporator sub-assembly.
AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SEN...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000001HA602YX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSPECTION; 2015 MY Tundra
[08/2014 - ]
INSPECTION
1. INSPECT NO. 1 COOLER THERMISTOR
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 - 2
-10°C (14°F)
7.30 to 9.10 kΩ
-5°C (23°F)
5.65 to 6.95 kΩ
0°C (32°F)
4.40 to 5.35 kΩ
5°C (41°F)
3.40 to 4.15 kΩ
10°C (50°F)
2.70 to 3.25 kΩ
15°C (59°F)
2.14 to 2.58 kΩ
20°C (68°F)
1.71 to 2.05 kΩ
25°C (77°F)
1.38 to 1.64 kΩ
30°C (86°F)
1.11 to 1.32 kΩ
NOTICE:
HINT:
As the temperature increases, the resistance decreases (see the
graph).
Text in Illustration
*1
Sensor
*a
Component without harness connected
(No. 1 Cooler Thermistor)
*b
Resistance (kΩ)
*c
Temperature (°C (°F))
If the result is not as specified, replace the sensor.
AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SEN...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002VY201EX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSTALLATION; 2015 MY Tundra
[08/2014 - ]
INSTALLATION
1. INSTALL NO. 1 COOLER THERMISTOR
NOTICE:
If reusing the evaporator, do not insert the No. 1 cooler thermistor into a location where the No. 1 cooler
thermistor was previously inserted. Insert the No. 1 cooler thermistor within range C shown in the
illustration.
(a) Install the No. 1 cooler thermistor to the No. 1 cooler evaporator sub-assembly as shown in the illustration.
AREA
STANDARD DIMENSION
a
48 mm (1.89 in.)
b
8.7 to 9.0 mm (0.343 to 0.354 in.)
c
34.3 mm (1.35 in.)
d
47.7 mm (1.88 in.)
e
48 to 52 mm (1.89 to 2.04 in.)
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Install the No. 1 cooler evaporator sub-assembly to the blower assembly.
3. INSTALL BLOWER ASSEMBLY
(a) Attach the 3 claws to install the blower assembly.
(b) Install the 6 screws.
AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SEN...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст