Toyota Tundra (2015 year). Manual — part 1752
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000005KA500AX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE EXHAUST: EXHAUST PIPE: REASSEMBLY; 2015 MY Tundra [08/2014 - ]
REASSEMBLY
1. INSTALL NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 2)
(a) Install the 4 No. 1 converter protector stays to the front exhaust pipe assembly.
(b) Install the lower No. 1 monolithic converter protector and upper No. 1 monolithic converter protector
with the 4 bolts and 4 nuts.
Torque:
11 N·m {107 kgf·cm, 8ft·lbf}
HINT:
Install the No. 1 monolithic converter protector within the angle range specified in the illustration.
Text in Illustration
*a
Top
*b
33.7 to 41.7°
2. INSTALL MONOLITHIC CONVERTER PROTECTOR (for Bank 2)
(a) Install the 2 No. 1 converter protector stays and 2 No. 2 converter protector stays to the front exhaust
pipe assembly.
(b) Install the lower monolithic converter protector and upper monolithic converter protector with the 4
bolts and 4 nuts.
Torque:
11 N·m {107 kgf·cm, 8ft·lbf}
HINT:
Install the monolithic converter protector within the angle range specified in the illustration.
Text in Illustration
3UR-FBE EXHAUST: EXHAUST PIPE: REASSEMBLY; 2015 MY Tu...
*a
Top
*b
-2.6 to 5.4°
3. INSTALL NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 1)
(a) Install the 4 No. 1 converter protector stays to the front No. 2 exhaust pipe assembly.
(b) Install the lower No. 1 monolithic converter protector and upper No. 1 monolithic converter protector
with the 4 bolts and 4 nuts.
Torque:
11 N·m {107 kgf·cm, 8ft·lbf}
HINT:
Install the No. 1 monolithic converter protector within the angle range specified in the illustration.
Text in Illustration
*a
Top
*b
45.5 to 53.5°
4. INSTALL MONOLITHIC CONVERTER PROTECTOR (for Bank 1)
(a) Install the 2 No. 1 converter protector stays and 2 No. 2 converter protector stays to the front No. 2
exhaust pipe assembly.
(b) Install the lower monolithic converter protector and upper monolithic converter protector with the 4
bolts and 4 nuts.
Torque:
11 N·m {107 kgf·cm, 8ft·lbf}
HINT:
Install the monolithic converter protector within the angle range specified in the illustration.
Text in Illustration
*a
Top
3UR-FBE EXHAUST: EXHAUST PIPE: REASSEMBLY; 2015 MY Tu...
*b
16.3 to 24.3°
3UR-FBE EXHAUST: EXHAUST PIPE: REASSEMBLY; 2015 MY Tu...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002HA500ZX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE EXHAUST: EXHAUST PIPE: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
2. INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)
3. INSTALL FRONT EXHAUST PIPE ASSEMBLY
(a) Install a new gasket and the front exhaust pipe assembly to the exhaust manifold sub-assembly RH
with 3 new nuts.
Torque:
54 N·m {554 kgf·cm, 40ft·lbf}
4. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
5. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)
6. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY
(a) Connect the front No. 2 exhaust pipe assembly to the exhaust pipe support.
(b) Install a new gasket and the front No. 2 exhaust pipe assembly to the exhaust manifold sub-assembly
LH with 3 new nuts.
Torque:
54 N·m {554 kgf·cm, 40ft·lbf}
7. INSTALL FRONT PROPELLER SHAFT ASSEMBLY
8. INSTALL CENTER EXHAUST PIPE ASSEMBLY
(a) Connect the center exhaust pipe assembly to the 3 exhaust pipe supports.
(b) Install 2 new gaskets to the front exhaust pipe assembly and front No. 2 exhaust pipe assembly.
(c) Install the center exhaust pipe assembly with the 4 bolts.
Torque:
48 N·m {489 kgf·cm, 35ft·lbf}
9. INSTALL TAILPIPE ASSEMBLY
(a) Connect the tailpipe assembly to the exhaust pipe support.
(b) Install a new gasket to the center exhaust pipe assembly.
3UR-FBE EXHAUST: EXHAUST PIPE: INSTALLATION; 2015 MY ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст