Toyota Tundra (2015 year). Manual — part 2792
(d) Using a screw extractor, remove the 2 tapered-head bolts, and
then remove the upper steering column with switch bracket and
the steering lock bracket from the steering column.
4. REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY
(a) Turn the ignition switch lock cylinder to the ACC position.
(b) Insert screwdriver in the steering column bracket assembly
upper as shown in the illustration. Then slide ignition switch lock
bracket assembly upper stopper.
HINT:
Make sure to pull the ignition switch lock cylinder assembly until
*a
Push
*b
Pull
*c
Claw
*c
Stopper
STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manu...
cylinder assembly.
HINT:
When the ignition lock cylinder assembly detach, a click sound is
heard.
5. REMOVE UNLOCK WARNING SWITCH ASSEMBLY
(a) Detach the 2 claws and remove the switch.
6. REMOVE KEY INTERLOCK SOLENOID
(a) Remove the 2 screws and key interlock solenoid from the
steering lock.
7. REMOVE IGNITION SWITCH ASSEMBLY
STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manu...
(a) Detach the 2 claws and remove the ignition switch from the
switch bracket.
8. REMOVE STEERING COLUMN BRACKET SPACER
(a) Using a brass bar, hammer and vise, gently strike the central
STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manu...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002ZQM019X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manual Tilt): INSPECTION; 2015 MY Tundra
[08/2014 - ]
INSPECTION
1. INSPECT STEERING COLUMN ASSEMBLY
529.5 mm (1.74 ft.)
(b) Inspect the bushings.
(1) Check that the 2 bushings are securely installed to the
steering column assembly.
Text in Illustration
*1
Bushing
If the bushings are missing or damaged, replace the steering
column assembly with a new one.
(2) Check the 2 bushings for deformation and damage.
If the bushings are deformed or damaged, replace the steering column assembly with a new one.
(c) Inspect the capsules.
(1) Check that the 2 capsules are securely installed to the
steering column assembly as shown in the illustration.
Standard Dimension:
A
B
3 mm (0.118 in.)
10 mm (0.394 in.)
Text in Illustration
*1
Capsule
If the capsules are not positioned as specified, replace the
steering column assembly with a new one.
STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manu...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст