Toyota Tundra (2015 year). Manual — part 1672
3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: Fuel Injectio...
Last Modified: 9-16-2014
6.6 J
Doc ID: RM000000YEQ0B0X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: EVAP System; 2015 MY Tundra [08/2014 - ]
EVAP System
RELATED DTCS
DTC
MONITORING ITEM
SEE PAGE
P043E Reference orifice clogged (built into canister pump module)
P043F Reference orifice high-flow (built into canister pump module)
P0441
Purge VSV (Vacuum Switching Valve) stuck closed
Purge VSV stuck open
Purge flow
P0451
Canister pressure sensor (built into canister pump module) noise
Canister pressure sensor (built into canister pump module) signal becomes fixed/flat
P0452 Canister pressure sensor (built into canister pump module) voltage low
P0453 Canister pressure sensor (built into canister pump module) voltage high
P0455 EVAP gross leak
P0456 EVAP small leak
P2401 Leak detection pump stuck OFF (built into canister pump module)
P2402 Leak detection pump stuck ON (built into canister pump module)
P2419 Vent valve stuck closed (built into canister pump module)
P2420 Vent valve stuck open (vent) (built into canister pump module)
P2610 Soak timer (built into ECM)
If any EVAP system DTCs are set, the malfunctioning area can be determined using the table below.
3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: EVAP System...
NOTICE:
If the reference pressure difference between the first and second checks is greater than the specification, all
the DTCs relating to the reference pressure (P043E, P043F, P2401, P2402 and P2419) are stored.
DESCRIPTION
3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: EVAP System...
3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: EVAP System...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст