Toyota Tundra (2015 year). Manual — part 2126
Last Modified: 9-16-2014
6.6 U
Doc ID: RM000002Y4101AX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): DATA LIST / ACTIVE TEST; 2015 MY Tundra
[08/2014 - ]
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely
on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the tester on.
(d) Enter the following menus:
(1) Techstream - Select: Body / (desired system) / Data List.
(e) According to the display on, read the "DATA LIST".
Main Body
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC
NOTE
Mirror Selection
SW (R)
Mirror master switch signal for RH
mirror / ON or OFF
ON: Switch is in R position
OFF: Switch is OFF or in L position
-
Mirror Selection
SW (L)
Mirror master switch signal for LH
mirror / ON or OFF
ON: Switch is in L position
OFF: Switch is OFF or in R position
-
Mirror Position
SW (R)
Mirror control switch signal (RIGHT)
/ ON or OFF
ON: RIGHT switch is ON
OFF: Any switch except RIGHT is ON
or all switches are OFF
-
Mirror Position
SW (L)
Mirror control switch signal (LEFT) /
ON or OFF
ON: LEFT switch is ON
OFF: Any switch except LEFT is ON or
all switches are OFF
-
Mirror Position
SW (UP)
Mirror control switch signal (UP) /
ON or OFF
ON: UP switch is ON
OFF: Any switch except UP is ON or
all switches are OFF
-
Mirror Position
SW (Dwn)
Mirror control switch signal (DOWN)
/ ON or OFF
ON: DOWN switch is ON
OFF: Any switch except DOWN is ON
or all switches are OFF
-
Outer Mirror Fold
SW
Mirror retract switch signal / ON or
OFF
ON: Switch is ON (retracting)
OFF: Switch is OFF
-
MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): DA...
Mirror
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL
CONDITION
DIAGNOSTIC
NOTE
Mirror Memory
No.1
Driver side mirror position memorized in seat
memory switch M1 / ON or OFF
ON: Memorized
OFF: Not memorized
-
Mirror Memory
No.2
Driver side mirror position memorized in seat
memory switch M2 / ON or OFF
ON: Memorized
OFF: Not memorized
-
RH Mir Position
Sensor V
Passenger side mirror vertical sensor voltage / MIN:
0, MAX: 255
Within range from 0
to 255
-
RH Mir Position
Sensor H
Passenger side mirror vertical sensor voltage / MIN:
0, MAX: 255
Within range from 0
to 255
-
LH Mir Position
Sensor V
Driver side mirror vertical sensor voltage / MIN: 0,
MAX: 255
Within range from 0
to 255
-
LH Mir Position
Sensor H
Driver side mirror vertical sensor voltage / MIN: 0,
MAX: 255
Within range from 0
to 255
-
2. PERFORM ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be
operated without removing any parts. This non-intrusive functional inspection can be very useful because
intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early
in troubleshooting is one way to save diagnostic time. Data List information can be displayed while
performing Active Tests.
(a) Warm up the engine.
(b) Turn the ignition switch OFF.
(c) Connect the the Techstream to the DLC3.
(d) Turn the ignition switch ON (IG).
(e) Turn the on.
(f) Enter the following menus:
(1) Techstream - Select: Body Electrical / MIRROR / Active Test.
(g) According to the display on tester, perform the "ACTIVE TEST".
(h) Techstream
Mirror
TESTER DISPLAY
TEST PART
CONTROL RANGE
DIAGNOSTIC NOTE
RH Mirror Up/Down
Mirror vertical operation
UP / OFF / DOWN
-
RH Mirror Right/Left
Mirror horizontal operation
RIGHT / OFF / LEFT
-
LH Mirror Up/Down
Mirror vertical operation
UP / OFF / DOWN
-
LH Mirror Right/Left
Mirror horizontal operation
RIGHT / OFF / LEFT
-
Mirror Fold
Mirror retract operation
FOLD / OFF
-
Mirror Return
Mirror retract operation
RETURN / OFF
-
MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): DA...
MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): DA...
Last Modified: 9-16-2014
6.6 J
Doc ID: RM000002Y4404RX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): Driver Side Power Mirror cannot be Adjusted
with Power Mirror Switch; 2015 MY Tundra [08/2014 - ]
Driver Side Power Mirror cannot be Adjusted with Power Mirror Switch
SYSTEM DESCRIPTION
signals) through the CAN communication line. Then the switch input signals are sent to the outer mirror control
ECU. Mirror adjustment is controlled by the outer mirror control ECU.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
MIRROR: POWER MIRROR CONTROL SYSTEM (w/ Memory): Driv...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст