Toyota Tundra (2015 year). Manual — part 1734
sequence shown in the illustration.
(c) Uniformly loosen and remove the 18 bearing cap bolts in the
sequence shown in the illustration.
NOTICE:
Uniformly loosen the bolts while keeping the camshaft level.
(d) Remove the 6 bearing caps.
HINT:
Arrange the removed parts in the correct order.
(e) Remove the No. 3 and No. 4 camshafts.
HINT:
Arrange the removed parts in the correct order.
35. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY LH
3UR-FBE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY;...
(a) Remove the camshaft housing by prying between the
cylinder head and camshaft housing with a screwdriver.
HINT:
Tape the screwdriver tip before use.
NOTICE:
36. REMOVE CAMSHAFT BEARING CAP RH
sequence shown in the illustration.
(c) Uniformly loosen and remove the 18 bearing cap bolts in the
sequence shown in the illustration.
NOTICE:
Uniformly loosen the bolts while keeping the camshaft level.
(d) Remove the 6 bearing caps.
HINT:
Arrange the removed parts in the correct order.
3UR-FBE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY;...
(e) Remove the No. 1 and No. 2 camshafts.
HINT:
Arrange the removed parts in the correct order.
37. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY RH
(a) Remove the camshaft housing by prying between the
cylinder head and camshaft housing with a screwdriver.
HINT:
Tape the screwdriver tip before use.
NOTICE:
38. REMOVE VALVE ROCKER ARM SUB-ASSEMBLY
(a) Remove the 32 valve rocker arms from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
39. REMOVE VALVE LASH ADJUSTER ASSEMBLY
(a) Remove the 32 valve lash adjusters from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
40. REMOVE VALVE STEM CAP
(a) Remove the 32 valve stem caps from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
41. REMOVE CYLINDER HEAD SUB-ASSEMBLY LH
42. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH
43. REMOVE CYLINDER HEAD GASKET LH
44. REMOVE CYLINDER HEAD GASKET RH
45. REMOVE CYLINDER BLOCK WATER JACKET
SPACER
(a) Remove the 2 water jacket spacers from the cylinder head.
NOTICE:
Be sure to remove the water jacket spacers. If not, they may
fall and become damaged when the cylinder block is
inverted.
46. REMOVE VENTILATION PIPE GASKET
3UR-FBE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY;...
(a) Using a screwdriver, pry out the ventilation pipe gasket.
HINT:
Tape the screwdriver tip before use.
47. REMOVE NO. 1 HEAT EXCHANGER COVER
(a) Remove the 12 bolts and 2 nuts.
(b) Remove the heat exchanger by prying between the heat
exchanger and cylinder block with a screwdriver.
HINT:
Tape the screwdriver tip before use.
48. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY
(a) Remove the 14 bolts and 2 nuts.
NOTICE:
3UR-FBE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY;...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст