Toyota Tundra (2015 year). Manual — part 310
Last Modified: 9-16-2014
6.6 T
Doc ID: RM000001EDL00KX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PARKING BRAKE: PARKING BRAKE SYSTEM: PROBLEM SYMPTOMS TABLE; 2015 MY Tundra [08/2014 -
]
PROBLEM SYMPTOMS TABLE
HINT:
Parking brake system
SYMPTOM
SUSPECTED AREA
SEE PAGE
Parking brake drags
Parking brake pedal travel (adjustment necessary)
Parking brake wire (sticking)
Parking brake shoe clearance (adjustment necessary)
Parking brake shoe (cracked or damaged)
Tension or return spring (damaged)
PARKING BRAKE: PARKING BRAKE SYSTEM: PROBLEM SYM...
Last Modified: 9-16-2014
6.6 N
Doc ID: RM000001EDJ00JX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PARKING BRAKE: PARKING BRAKE SYSTEM: ADJUSTMENT; 2015 MY Tundra [08/2014 - ]
ADJUSTMENT
1. REMOVE REAR WHEEL
2. ADJUST PARKING BRAKE SHOE CLEARANCE
(a) Temporarily install the hub nuts.
(b) Remove the hole plug.
locked. Then rotate the adjustment wheel in the "Y" direction 8
notches.
(d) Check that the disc can be rotated smoothly. If not, rotate the adjustment wheel in the "Y" direction and
check again.
(e) Install the hole plug.
(f) Remove the hub nuts.
3. INSTALL REAR WHEEL
Torque:
for aluminum wheel -
131 N·m {1336 kgf·cm, 97ft·lbf}
for steel wheel -
209 N·m {2131 kgf·cm, 154ft·lbf}
4. CHECK PARKING BRAKE PEDAL TRAVEL
(a) Firmly depress the parking brake pedal.
(b) Release the parking brake.
Standard:
6 to 9 clicks
5. ADJUST PARKING BRAKE PEDAL TRAVEL
(a) Depress the parking brake pedal.
PARKING BRAKE: PARKING BRAKE SYSTEM: ADJUSTMENT; 20...
(b) Apply load equivalent to 4 kN (408 kgf, 899.2 lbf) on equalizer
twice to pull No. 2 and No. 3 parking brake cable to remove
initial elongation.
(c) Release the parking brake pedal to the original position.
(d) Loosen the pedal side No. 1 parking brake cable lock nut.
(e) Turn the pedal side No. 1 parking brake cable adjustment nut until the parking brake pedal travel is
correct.
Standard parking brake pedal travel:
PEDAL LOAD
SPECIFIED CONDITION
300 N (31 kgf, 67.4 lbf)
6 to 9 clicks
(f) Using a wrench or equivalent to hold the adjustment nut, tighten the lock nut.
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
NOTICE:
Pay attention that the adjustment nut does not rotate with the lock nut during tightening.
(g) Additionally, excessive pedal travel can be adjusted on the No. 1 parking brake cable underbody side as
follows.
(1) Release the parking brake pedal to the original position.
PARKING BRAKE: PARKING BRAKE SYSTEM: ADJUSTMENT; 20...
(2) Loosen the underbody side No. 1 parking brake cable lock
nut.
(3) Turn the underbody side No. 1 parking brake cable adjustment nut until the parking brake pedal travel
is correct.
Standard parking brake pedal travel:
PEDAL LOAD
SPECIFIED CONDITION
300 N (31 kgf, 67.4 lbf)
6 to 9 clicks
(4) Tighten the No. 1 parking brake cable underbody lock nut.
Torque:
13 N·m {128 kgf·cm, 9ft·lbf}
NOTICE:
Pay attention that the adjustment nut does not rotate with the lock nut during tightening.
Standard:
6 to 9 clicks
If the result is not as specified, adjust the parking brake pedal travel again.
(i) Check whether the parking brake drags or not.
If the parking brake drags, adjust the shoe clearance.
(j) When operating the parking brake pedal, check that the parking brake pedal indicator light comes on at the
first notch.
If not, adjust the parking brake switch installation position.
PARKING BRAKE: PARKING BRAKE SYSTEM: ADJUSTMENT; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст