Toyota Tundra (2015 year). Manual — part 768
5. CHECK SHIFT LOCK CONTROL ECU (for Floor Shift Type)
(a) Measure the voltage according to the value(s) in the table
below.
HINT:
TESTER
CONNECTION
CONDITION
SPECIFIED
CONDITION
5 (KLS+) - 1 (E)
Ignition switch ACC and shift
lever in P
Below 1 V
5 (KLS+) - 1 (E)
Ignition switch ACC and shift
lever not in P
7.5 to 11 V
5 (KLS+) - 1 (E)
Ignition switch ACC and shift
lever not in P (after approx. 1
second)
6 to 9 V
6 (ACC) - 1 (E)
Ignition switch ON
10 to 14 V
6 (ACC) - 1 (E)
Ignition switch ACC
10 to 14 V
6 (ACC) - 1 (E)
Ignition switch off
Below 1 V
4 (STP) - 1 (E)
Brake pedal depressed
10 to 14 V
4 (STP) - 1 (E)
Brake pedal released
Below 1 V
8 (IG) - 1 (E)
Ignition switch ON
10 to 14 V
8 (IG) - 1 (E)
Ignition switch off
Below 1 V
SLS+ - 1 (E)
Ignition switch ON and brake
pedal depressed
10 to 14 V
SLS+ - 1 (E)
Ignition switch ON and brake
pedal released
Below 1 V
Text in Illustration
*a
Component with harness connected
(Shift Lock Control ECU)
If the result is not as specified, replace the shift lock control ECU.
(b) Measure the resistance according to the value(s) in the table
below.
NOTICE:
Do not disconnect the shift lock control ECU connector.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 (E) - Body ground
Always
Below 1 Ω
AB60F AUTOMATIC TRANSMISSION: SHIFT LOCK SYSTEM: O...
If the result is not as specified, replace the shift lock control ECU.
6. CHECK SHIFT LOCK SOLENOID (for Column Shift Type)
(a) Disconnect the transmission control switch connector.
(b) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 (SLS+) - 8 (E)
Always
24 to 26 Ω
Text in Illustration
*a
Component without harness connected
(Transmission Control Switch)
If the result is not as specified, replace the shift lock solenoid.
7. CHECK SHIFT LOCK SOLENOID (for Floor Shift Type)
(a) Disconnect the shift lock solenoid connector from the shift lock control ECU.
(b) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
4 (SLS+) - 3 (SLS-)
Always
101 to 123 Ω
Text in Illustration
*a
Component without harness connected
(Shift Lock Solenoid)
If the result is not as specified, replace the floor shift assembly.
8. CHECK KEY INTERLOCK SOLENOID
(a) Disconnect the solenoid connector.
AB60F AUTOMATIC TRANSMISSION: SHIFT LOCK SYSTEM: O...
(b) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 (SOL+) - 2 (SOL-)
20°C (68°F)
14.4 Ω
Text in Illustration
*a
Component without harness connected
(Key Interlock Solenoid)
If the result is not as specified, replace the solenoid.
(c) Connect the positive (+) battery lead to terminal 1 (SOL+) and the negative (-) battery lead to terminal 2
(SOL-).
AB60F AUTOMATIC TRANSMISSION: SHIFT LOCK SYSTEM: O...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002BL3045X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60F AUTOMATIC TRANSMISSION: SPEED SENSOR: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
AB60F AUTOMATIC TRANSMISSION: SPEED SENSOR: COMPO...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст