Toyota Tundra (2015 year). Manual — part 73
2.
CHECK FOR DTC
(a) Clear the DTCs
.
(b) Check for DTCs
.
OK:
No DTCs are output.
Result
RESULT
PROCEED TO
OK
A
NG (for Column Shift Type)
B
NG (for Floor Shift Type)
C
B
REPLACE NAVIGATION RECEIVER ASSEMBLY
C
REPLACE NAVIGATION RECEIVER ASSEMBLY
A
USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod"
VERSION WAS INCOMPATIBLE, OR USB DEVICE OR
"iPod" WAS DEFECTIVE
NAVIGATION: NAVIGATION SYSTEM: B1585; USB Device Malfunc...
OK
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000005K6J00BX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: NAVIGATION: NAVIGATION SYSTEM: B158C; SD Card Communication Malfunction; 2015 MY Tundra
[08/2014 - ]
DTC
B158C
SD Card Communication Malfunction
DESCRIPTION
The navigation receiver assembly stores this DTC when the SD card cannot be mounted when inserted into the
SD card slot.
DTC
CODE
DTC DETECTION CONDITION
TROUBLE AREA
B158C
The SD card cannot be mounted when inserted into the SD
card slot.
SD card
Navigation receiver
assembly
INSPECTION PROCEDURE
PROCEDURE
1.
CHECK SD CARD
(a) Turn the ignition switch off and remove the SD card from the SD card slot.
(b) Check that the SD card is not damaged.
OK:
The SD card is not damaged.
NG
REPLACE SD CARD
2.
CLEAN COMPONENTS
NAVIGATION: NAVIGATION SYSTEM: B158C; SD Card Communica...
NEXT
(c) Insert the SD card into the SD card slot.
3.
CHECK FOR DTC
(a) Clear the DTCs
.
(b) Recheck for DTCs and check that no DTCs are output
.
OK:
No DTCs are output.
NG
GO TO STEP 4
OK
END (FOREIGN MATTER IS ADHERED TO SD CARD
OR SD CARD SLOT)
4.
REPLACE SD CARD
(a) Replace the SD card.
(b) Clear the DTCs
.
(c) Recheck for DTCs and check that no DTCs are output
.
OK:
No DTCs are output.
Result
RESULT
PROCEED TO
OK
A
NG (for Column Shift Type)
B
NG (for Floor Shift Type)
C
B
REPLACE NAVIGATION RECEIVER ASSEMBLY
C
REPLACE NAVIGATION RECEIVER ASSEMBLY
A
END (SD CARD IS DEFECTIVE)
NAVIGATION: NAVIGATION SYSTEM: B158C; SD Card Communica...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000005K8J011X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: NAVIGATION: NAVIGATION SYSTEM: B158F; AV Signal Stoppage (Low Battery Voltage); 2015 MY Tundra
[08/2014 - ]
DTC
B158F
AV Signal Stoppage (Low Battery Voltage)
DESCRIPTION
This DTC is stored when a video or audio signal is interrupted due to battery voltage input to the navigation
receiver assembly dropping temporarily.
DTC
CODE
DTC DETECTION CONDITION
TROUBLE AREA
B158F
A video or audio signal is interrupted when the battery
voltage drops.
Navigation receiver
assembly
Harness or connector
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following procedure.
PROCEDURE
1.
CHECK VEHICLE SIGNAL (OPERATION CHECK)
NAVIGATION: NAVIGATION SYSTEM: B158F; AV Signal Stoppage ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст