Toyota Tundra (2015 year). Manual — part 2433
A
OK
2.
PERFORM ACTIVE TEST USING TECHSTREAM (TACHOMETER)
(a) Operate the Techstream according to the display and select "Active Test"
.
Combination Meter:
TESTER DISPLAY
TEST PART
CONTROL RANGE
DIAGNOSTIC NOTE
Tachometer Operation
Tachometer
0, 1000, 2000, 3000, 4000, 5000, 6000, 7000
-
OK:
Needle indication is normal.
HINT:
Confirm that the vehicle is stopped and engine idling.
NG
REPLACE COMBINATION METER ASSEMBLY
3.
READ VALUE USING TECHSTREAM (TACHOMETER)
(a) Operate the Techstream according to the display and select "Active Test"
.
Combination Meter:
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Engine Rpm
Engine speed/Min.: 0, Max.: 12750
Idling: 700 to 800
Unit: rpm
OK:
Engine speed displayed on Techstream is almost the same as actual engine speed.
NG
GO TO STEP 4
OK
REPLACE COMBINATION METER ASSEMBLY
4.
READ VALUE USING TECHSTREAM (ENGINE SPEED)
(a) Operate the Techstream according to the display and select "Data List"
.
METER: METER / GAUGE SYSTEM: Tachometer Malfunction; 2015 ...
Engine and ECT:
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Engine Speed
Engine speed/Min.: 0, Max.: 16838.75
Idling: 700 to 800
Unit: rpm
OK:
Engine speed displayed on Techstream is almost the same as actual engine speed.
Result
RESULT
PROCEED TO
OK
A
NG (for 1UR-FE)
B
NG (for 3UR-FE)
C
NG (for 3UR-FBE)
D
B
Go to PROBLEM SYMPTOMS TABLE
C
Go to PROBLEM SYMPTOMS TABLE
D
Go to PROBLEM SYMPTOMS TABLE
A
REPLACE COMBINATION METER ASSEMBLY
METER: METER / GAUGE SYSTEM: Tachometer Malfunction; 2015 ...
Last Modified: 9-16-2014
6.6 J
Doc ID: RM0000030W5024X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: METER: METER / GAUGE SYSTEM: Fuel Receiver Gauge Malfunction; 2015 MY Tundra [08/2014 - ]
Fuel Receiver Gauge Malfunction
DESCRIPTION
The fuel sender gauge has a variable resistance mechanism. The resistance decreases when the fuel amount
increases, and the resistance increases when the fuel amount decreases. The fuel receiver gauge changes based
INSPECTION PROCEDURE
PROCEDURE
1.
CHECK FOR DTC
(a) Check for DTCs
.
Result
RESULT
PROCEED TO
DTC B1500 is not output
A
DTC B1500 is output
B
METER: METER / GAUGE SYSTEM: Fuel Receiver Gauge Malfunction...
A
B
Go to DTC B1500
2.
PERFORM ACTIVE TEST USING TECHSTREAM (FUEL RECEIVER GAUGE)
(a) Operate the Techstream according to the steps on the display and select "Active Test"
.
OK:
Needle indication is normal.
Combination Meter:
TESTER DISPLAY
TEST PART
CONTROL RANGE
DIAGNOSTIC
NOTE
Fuel Meter
Operation
Fuel receiver
gauge
OFF, Sender E, Empty, Warning, 1/4, 1/2, 3/4, Full or
Sender F
-
NG
REPLACE COMBINATION METER ASSEMBLY
OK
PROCEED TO NEXT INSPECTION PROCEDURE
SHOWN IN PROBLEM SYMPTOMS TABLE
METER: METER / GAUGE SYSTEM: Fuel Receiver Gauge Malfunction...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст