Toyota Tundra (2015 year). Manual — part 1025
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000014YB01AX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE COOLING: FAN: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE NO. 1 ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT
3. REMOVE V-BANK COVER SUB-ASSEMBLY
4. REMOVE AIR CLEANER ASSEMBLY
5. REMOVE INLET RADIATOR HOSE
(a) Remove the radiator hose.
6. REMOVE FAN SHROUD
(a) Loosen the 4 nuts holding the fluid coupling fan
(b) Remove the fan and generator V-belt
.
(c) Disconnect the reservoir hose from the upper radiator tank.
(d) Remove the 2 bolts holding the fan shroud.
fan.
NOTICE:
Be careful not to damage the radiator core.
(f) Remove the fan pulley from the fan bracket.
7. REMOVE FAN
(a) Remove the 4 nuts and fan from the fluid coupling.
1UR-FE COOLING: FAN: REMOVAL; 2015 MY Tundra [08/2014 - ]
Last Modified: 9-16-2014
6.6 G
Doc ID: RM0000014Y0027X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE COOLING: FAN: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT FLUID COUPLING ASSEMBLY
(a) Check the fluid coupling for damage or silicon oil leaks.
If necessary, replace the fluid coupling assembly.
1UR-FE COOLING: FAN: INSPECTION; 2015 MY Tundra [08/2014 - ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000014Y801AX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE COOLING: FAN: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL FAN
(a) Install the fan to the fluid coupling with the 4 nuts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
2. INSTALL FAN SHROUD
(a) Install the fan pulley to the fan bracket.
(b) Place the fan shroud together with the fluid coupling fan between the radiator and engine.
NOTICE:
Be careful not to damage the radiator core
(c) Temporarily install the fluid coupling fan to the fan bracket with the 4 nuts. Tighten the nuts as much as
possible by hand.
(d) Attach the shroud's claws to the radiator as shown in the
illustration.
(e) Install the shroud with the 2 bolts.
Torque:
6.5 N·m {66 kgf·cm, 58in·lbf}
(f) Connect the reservoir hose to the upper radiator tank.
(g) Install the fan and generator V-belt
.
1UR-FE COOLING: FAN: INSTALLATION; 2015 MY Tundra [08/2014...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст