Toyota Tundra (2015 year). Manual — part 2988
3. CHECK DTC (Using Techstream)
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / SRS Airbag / Trouble Codes.
(e) Read the DTCs.
4. CLEAR DTC (Using Techstream)
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / SRS Airbag / Trouble Codes.
(e) Erase the DTCs.
SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: DTC ...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000000XFF0GHX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: CHECK MODE PROCEDURE; 2015 MY Tundra
[08/2014 - ]
CHECK MODE PROCEDURE
1. CHECK MODE PROCEDURE (Using Techstream)
NOTICE:
Select "Signal Check" from the "DTC Check" screen displayed on the Techstream to clear the output DTCs
(both present and past).
HINT:
DTCs can be detected more sensitively in check mode than in normal diagnosis mode.
Perform check mode inspection when a malfunction in each squib circuit is suspected even after the normal
system code is output through normal diagnosis mode inspection.
(a) Check and ensure the following conditions:
(1) Battery positive voltage 11 V or higher.
(2) Shift lever in the P or N position.
(3) A/C switch off.
(b) Turn the ignition switch off.
(c) Connect the Techstream to the DLC3.
(d) Turn the ignition switch ON.
(e) Turn the Techstream on.
(f) Enter the following menus: Body Electrical / SRS Airbag / Check Mode.
SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: CHEC...
Last Modified: 9-16-2014
6.6 U
Doc ID: RM000000XFH0G0X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: DATA LIST / ACTIVE TEST; 2015 MY Tundra
[08/2014 - ]
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely
on these reference values when deciding whether a part is faulty or not.
(a) Warm up the engine.
(b) Turn the ignition switch off.
(c) Connect the Techstream to the DLC3.
(d) Turn the ignition switch ON.
(e) Turn the Techstream on.
(f) Enter the following menus: Body Electrical / SRS Airbag / Data List.
(g) According to the display on the Techstream, read the "Data List".
SRS Airbag:
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC
NOTE
Driver Seat Position
Driver Seat Position/
FORWARD: Seat position is forward
BKWARD: Seat position is backward
FAIL: Failure detected
FORWARD/BKWARD
-
Passenger
Classification
Passenger Classification/
NG: Data is not determined
OFF: Vacant
CHILD: Child (less than 36 kg (79.37 lb)) is
seated
AF05: Adult (36 to 54 kg (79.37 to 119.05 lb))
is seated
AM50: Adult (more than 54 kg (119.05 lb)) is
seated
FAIL: A failure is detected
OFF/CHILD
/AF05/AM50
-
Driver Buckle SW
Driver Buckle SW/
UNSET: The driver side seat belt is not
fastened
SET: The driver side seat belt is fastened
UNSET/SET
-
SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: DATA ...
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC
NOTE
NG: Data is not determined
Passenger Buckle SW
Passenger Buckle SW/
UNSET: The front passenger side seat belt is
not fastened
SET: The front passenger side seat belt is
fastened
NG: Data is not determined
UNSET/SET
-
Display Type
Information
Display Type Information/
LR: The display is indicated by LH/RH
DP: The display is indicated by
Driver/Passenger
DP
-
Min.: 0, Max.: 255
0
-
SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: DATA ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст