Toyota Tundra (2015 year). Manual — part 648
(c) With the shift lever's protrusion pushed towards the column shift
control shift lever retainer's N position wall, align the spring's
roller to the groove as shown in the illustration. Then tighten the
bolt.
Torque:
3.8 N·m {38 kgf·cm, 33in·lbf}
9. INSTALL COLUMN SHIFT SHIFTING BELLCRANK
ASSEMBLY
(a) Apply MP grease to the shifting bellcrank shown in the
illustration.
(b) Install the shifting bellcrank with the bolt.
Torque:
5.0 N·m {51 kgf·cm, 44in·lbf}
AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000001M1U01LX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY (for Column Shift Type): INSTALLATION;
2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL COLUMN SHIFT ASSEMBLY
(a) Using a T30 ''TORX'' wrench, install the column shift with the 3 bolts.
Torque:
4.0 N·m {41 kgf·cm, 35in·lbf}
(b) Connect the connector and attach the harness clamp.
(c) Connect the column shift transmission control cable end to the
column shift.
NOTICE:
Make sure to install the cable end so that the inner cable is not
twisted. Confirm that the cable end's ridged side is facing
upward.
2. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY
3. ADJUST SHIFT LEVER POSITION
4. INSPECT SHIFT LEVER POSITION
AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002YBE041X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY (for Floor Shift Type): COMPONENTS; 2015
MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст