Toyota Tundra (2015 year). Manual — part 2219
OK
(a) Remove the windshield deicer relay assembly (DEICER) from
the engine room relay block, junction block.
(b) Disconnect the J19 air conditioning amplifier connector.
(c) Measure the voltage according to the value(s) in the table
below.
Standard voltage:
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
Windshield deicer relay assembly
(DEICER) terminal 1 - Body ground
Ignition switch
ON
11 to 14 V
Ignition switch
OFF
Below 1 V
Windshield deicer relay assembly
(DEICER) terminal 3 - Body ground
Always
11 to 14 V
(d) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
Windshield deicer relay assembly
(DEICER) terminal 2 - J19-40 (D)
Always
Below 1 Ω
Windshield deicer relay assembly
(DEICER) terminal 2 or J19-40 (D) -
Body ground
Always
10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
6.
CHECK HARNESS AND CONNECTOR (DEICER RELAY - WINDSHIELD DEICER WIRE)
WINDSHIELD / WINDOWGLASS: WINDSHIELD DEICER SYSTE...
OK
(a) Remove the windshield deicer relay assembly (DEICER) from
the engine room relay block, junction block.
(b) Disconnect the A23 windshield glass (windshield deicer wire)
connector.
(c) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
Windshield deicer relay assembly
(DEICER) terminal 5 - A23-1 (B)
Always
Below 1 Ω
Windshield deicer relay assembly
(DEICER) terminal 5 or A23-1 (B) -
Body ground
Always
10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
7.
CHECK HARNESS AND CONNECTOR (WINDSHIELD DEICER WIRE - BODY GROUND)
(a) Disconnect the A23 windshield glass (windshield deicer wire)
connector.
(b) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
A23-2 (E) - Body ground
Always
Below 1 Ω
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
WINDSHIELD / WINDOWGLASS: WINDSHIELD DEICER SYSTE...
OK
8.
CHECK HARNESS AND CONNECTOR (WINDSHIELD DEICER POWER SOURCE)
(a) Disconnect the A23 windshield glass (windshield deicer wire)
connector.
(b) Measure the voltage according to the value(s) in the table
below.
Standard voltage:
TESTER
CONNECTION
CONDITION
SPECIFIED
CONDITION
A23-1 (B) -
A23-2 (E)
Ignition switch ON, windshield
deicer switch on
11 to 14 V
Ignition switch ON, windshield
deicer switch off
Below 1 V
NG
REPLACE AIR CONDITIONING AMPLIFIER
OK
REPLACE WINDSHIELD GLASS
WINDSHIELD / WINDOWGLASS: WINDSHIELD DEICER SYSTE...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002W6E00BX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: WINDSHIELD / WINDOWGLASS: WINDSHIELD GLASS: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
WINDSHIELD / WINDOWGLASS: WINDSHIELD GLASS: COMP...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст