Toyota Tundra (2015 year). Manual — part 2327
NEXT
NEXT
4.
OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Operation Check
5.
REPAIR OR REPLACE
6.
CONFIRMATION TEST
NEXT
END
DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: HOW TO...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000002UCF00UX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: OPERATION CHECK; 2015 MY Tundra [08/2014 -
]
OPERATION CHECK
1. CHECK ELECTRICAL DOOR LOCK OPERATION
(a) Check the basic function.
(1) Check that all doors lock when the door lock control switch (for manual operation) is turned to LOCK and
all doors unlock when turned to UNLOCK.
(2) Check that all doors lock when the driver side door lock key cylinder is turned to LOCK using the key.
(3) Check that only the driver side door unlocks when the driver side door lock key cylinder is turned to
UNLOCK and all doors unlock when turned to UNLOCK once again within 3 seconds using the key (2-step
unlock function).
(b) Check the key lock-in prevention.
NOTICE:
In order to prevent the key from being locked-in, the inspection should be made with the driver side door
window open.
(1) Turn the ignition switch ON.
(2) With the driver side door open, check that all doors unlock immediately after the door lock knob for the
driver side door is turned to LOCK.
(3) With the driver side door open, check that all doors unlock immediately after the door control switch
(for manual operation) is turned to LOCK.
(4) With the driver side door open, turn the driver side door lock knob to LOCK and hold it for 2 seconds or
more, and then close the driver side door. Then check that all doors unlock.
(c) Check the security function.
(1) Close all doors with the driver side door glass open so that the door control switch can be operated from
outside the vehicle.
(2) Pull out the key, open the driver side door and then close and lock the door without using the key. Then,
check that all doors do not unlock when the door control switch (for manual operation) is turned to
UNLOCK from outside the vehicle.
(3) Pull out the key, close and lock the driver side door with the key operation. Under this condition, check
that all doors do not unlock when the door control switch (for manual operation) is turned to UNLOCK
from outside the vehicle.
(4) Pull out the key, close the driver side door and lock the door with the wireless door lock operation.
Then, check that all doors do not unlock when the door control switch (for manual operation) is turned
to UNLOCK from outside the vehicle.
HINT:
Check that the security function is canceled under the following conditions.
The ignition switch is turned ON.
The driver side door is unlocked using the key.
The door control switch (for manual operation) is turned to UNLOCK after the door control knob is turned to
UNLOCK manually.
The doors are unlocked by wireless operation.
DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: OPERATI...
(d) Check the illumination function.
(1) Set the room light switch in the DOOR position.
(2) With all the doors locked, check that all doors unlock when the driver side door lock cylinder is turned to
UNLOCK using the key and that the room light turns on.
(3) Check that the room light turns off in approximately 15 seconds after the doors have not been opened.
DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: OPERATI...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000002UCI00RX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: CUSTOMIZE PARAMETERS; 2015 MY Tundra
[08/2014 - ]
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
(b) Turn the ignition switch ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting.
(e) Select the setting by referring to the table below.
Main Body
DISPLAY
DEFAULT
CONTENTS
SETTING
Unlock Key Twice
ON
Function that unlocks only driver side door when driver side door key
cylinder is turned to unlock once, and unlock all doors when it is turned
to unlock twice. For OFF setting, turning it once unlocks all doors.
ON/OFF
Auto lock
OFF
Function that locks all doors when vehicle speed reaches a certain
level.
ON/OFF
Auto Lock/Shift
ON
With engine running and all doors closed, function that locks all doors
when lever is moved to P from any position other than P.
ON/OFF
Auto Unlock/Shift
ON
Function that unlocks all doors when lever is moved to P from any
position other than P while ignition switch is ON.
ON/OFF
All
Unlock/Open-Close
OFF
Function that unlocks all other doors when opening driver door within
10 seconds after turning ignition switch ON.
ON/OFF
2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY
HINT:
The following items can be customized.
NOTICE:
(b) Enter the following menus: SET UP / Vehicle / Vehicle Customization / Other vehicle settings.
(c) Select the setting by referring to the table below.
DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: CUSTOMI...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст