Toyota Tundra (2015 year). Manual — part 33
AUDIO / VISUAL: SATELLITE RADIO TUNER (for Floor Shift Type)...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002ZUK023X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AUDIO / VISUAL: SATELLITE RADIO TUNER (for Floor Shift Type): REMOVAL; 2015 MY Tundra [08/2014 -
]
REMOVAL
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the
battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal
notice before proceeding with work
.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
4. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
7. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY
8. REMOVE NO. 1 NAVIGATION WIRE
(a) Disconnect each connector and remove the No. 1 navigation
wire.
9. REMOVE NO. 1 RADIO RECEIVER BRACKET
(a) Remove the 5 bolts and No. 1 radio receiver bracket.
10. REMOVE NO. 2 RADIO RECEIVER BRACKET
AUDIO / VISUAL: SATELLITE RADIO TUNER (for Floor Shift Type)...
(a) Remove the 5 bolts and No. 2 radio receiver bracket.
11. REMOVE STEREO COMPONENT TUNER ASSEMBLY
(a) Detach the 2 guides and remove the stereo component tuner
assembly as shown in the illustration.
AUDIO / VISUAL: SATELLITE RADIO TUNER (for Floor Shift Type)...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002ZUI022X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AUDIO / VISUAL: SATELLITE RADIO TUNER (for Floor Shift Type): INSTALLATION; 2015 MY Tundra
[08/2014 - ]
INSTALLATION
1. INSTALL STEREO COMPONENT TUNER ASSEMBLY
(a) Attach the 2 guides to install the stereo component tuner
assembly as shown in the illustration.
2. INSTALL NO. 2 RADIO RECEIVER BRACKET
(a) Install the No. 2 radio receiver bracket with the 5 bolts.
Torque:
3.5 N·m {36 kgf·cm, 31in·lbf}
3. INSTALL NO. 1 RADIO RECEIVER BRACKET
(a) Install the No. 1 radio receiver bracket with the 5 bolts.
Torque:
3.5 N·m {36 kgf·cm, 31in·lbf}
4. INSTALL NO. 1 NAVIGATION WIRE
(a) Connect each connector to install the No. 1 navigation wire.
5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
6. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
8. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
AUDIO / VISUAL: SATELLITE RADIO TUNER (for Floor Shift Type)...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст