Toyota Tundra (2015 year). Manual — part 394
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000010NC07XX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: REMOVAL; 2015 MY Tundra
[08/2014 - ]
REMOVAL
1. DISCONNECT TRANSMISSION CONTROL CABLE
ASSEMBLY
(a) Remove the nut and disconnect the cable.
2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Disconnect the switch connector.
(b) Remove the nut, spring washer and transmission control shaft
lever RH.
A760E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITI...
(e) Remove the bolt and switch.
HINT:
Make sure that the manual valve lever shaft has not been
rotated prior to installing the park/neutral position switch as the
detent spring may become detached from the manual valve
lever shaft.
A760E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITI...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002BKX047X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: INSPECTION; 2015 MY Tundra
[08/2014 - ]
INSPECTION
1. INSPECT PARK/NEUTRAL POSITION SWITCH
ASSEMBLY
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
2 (RB) - 6
(PL)
4 (B) - 5
(L)
Shift lever in P
Below 1 Ω
2 (RB) - 1 (RL)
Shift lever in R
Below 1 Ω
2 (RB) - 9
(NL)
4 (B) - 5
(L)
Shift lever in N
Below 1 Ω
2 (RB) - 7 (DL)
Shift lever in D, S, "+" or
"-"
Below 1 Ω
2 (RB) - 6
(PL)
4 (B) - 5
(L)
Shift lever not in P
10 kΩ or higher
2 (RB) - 1 (RL)
Shift lever not in R
10 kΩ or higher
2 (RB) - 9
(NL)
4 (B) - 5
(L)
Shift lever not in N
10 kΩ or higher
2 (RB) - 7 (DL)
Shift lever not in D, S,
"+" or "-"
10 kΩ or higher
If the result is not as specified, replace the park/neutral position
switch assembly.
A760E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITI...
Last Modified: 9-16-2014
6.6 N
Doc ID: RM0000010N807XX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT; 2015 MY
Tundra [08/2014 - ]
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(b) Align the groove with the neutral basic line.
(c) Hold the switch in position and tighten the bolt.
Torque:
13 N·m {130 kgf·cm, 9ft·lbf}
(d) After the adjustment, perform the on-vehicle inspection
.
A760E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITI...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст